Best Water Cooling Flush

The PrimoChill Rad Clean – Radiator Cleaning Treatment is a solution for cleaning radiators outside of a loop. By using this cleaner you can “”scrub”” the inside of your rad without fear of damaging other components, seals or acrylic! This solution is easy to mix, easy to use, and gets you ready to go!
Specifications

Compatibility
Rad Clean is compatible with the internal metals found in radiators only! Using Rad Clean on nickel items is NOT compatible!
Instructions
For this pre-treatment to work correctly follow the instructions below. 
Step 1: Dilute one half bottle of RadClean into 32oz of distilled/Ro/Di water.
Step 2: Fill radiator up with Radclean mixture
Step 3:Close both ports with plastic fillports. Ensure they’re plastic. Shake radiator.
Step 4:Let your radiator sit for one hour.
Step 5:Drain radiator and flush radiator extensively with distilled/ro/di water
Step 6:Drain radiator and let dry completely.
Warnings
Important to use plastic fittings when cleaning radiators while using Rad Clean! PrimoChill is not responsible for any hardware damage. Use at your own risk.

Available in 480mm, 420mm and 360mm sizes, Thermaltake Pacific CL radiators are a high-performance copper radiator series with high-density copper fin design and brass tank. Built for 120mm/140mm high-static pressure fans, these radiators are manufactured from premium-quality materials to provide exceptional performance and unrivalled reliability. Constructed with stainless steel side panels guarantees the durability as well as reducing the weight of the radiator. Integrated G1/4″ threads make it easy to install, while rigid connections ensure leak-resistant measures are in place. With an ideal mounting, fitting and flow set-up, the Pacific CL Series meets your cooling needs in every way. 2 year warranty.

Primochill Sys Prep was created to address the immense customer requests for a clean and well maintained cooling system. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep.
Specifications

Compatibility: Sysprep is compatible with rigid and flexible tubing of all sizes.  It is safe to use on rubber, plastics and acrylics so rest assured all your seals, o-rings, reservoirs and such are all safe!
Instructions
1.Install your cooling loop and double-check connections to ensure loop is “closed”. No Leaks!
2.Empty bottle of SysPrep into 1 US Gallon of fresh DI or Distilled water, and shake for 30 seconds
3.Add mix to cooling loop.
4.Fill loop with treated water and be sure to remove as many air bubbles as possible.
5.Start loop pump and begin circulating the treated water.
6.Run treated water for at least 12 to 24 hours to ensure loop is properly flushed and treated.  While using for longer periods of time doesn’t have negative effects, Sysprep is not an effective final coolant and should be replaced with coolant before any extended use of computer.
7.Drain System. Inspect drained water for debris or foreign particles. Dispose of drained water. Repeat flush if needed.
8.Fill loop with your choice of coolant and begin water-cooling.**

** Residual treated water left in your loop is not harmful. If you prefer to remove it, do a simple rinse of the loop with fresh DI or Distilled Water. This rinse will not affect the results of the Sys Prep just performed.

Warnings:Do not mix with any pre-mixed coolants as it will over saturate the inhibitors.
PrimoChill is not responsible for any hardware damage. Use at your own risk.

OTC’s No. 6043 Blast-Vac Multipurpose Cleaning Gun is perfectly suited for quick and efficient cooling system flushing. Simply attach it to radiator or heater hoses and you’re in business. Also useful for washing engines and even shop floors. Just two simple connections – one to shop air, the other to a standard water faucet – creates a unique air/water vortex blast for powerful cleaning capabilities. The tool can also be used to vacuum by turning the venturi inside the gun in the opposite direction. Air flow is reversed to create a strong vacuum. Note: While normal water pressure will handle the majority of a cooling system flush situations, short blasts are sometimes needed to loosen some contaminants from within the system. Value is at the core of the OTC tool and equipment portfolio. For a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Whether it’s a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians’ productivity and shop profits.

Water Cooling Acrylic 2 Way Meter G1/4 Threaded without Barbs.
100% new, fine workmanship, simple sense is very strong!
Collocation two pieces of G1/4 thread connector, suitable for 3/8 ID, 1/2 OD pipe(Not Included here).
2-way configuration, you can Installation drain port, temperature probe, LED lights and so on.
Available colors are :Red,Green.
Package includes:1 x Water Cooling Meter.

Graduated Squeeze Wash bottle
Color: Clear

Lightweight, good appearance
Adopted high-quality environmentally friendly material
Material: LDPE, bear high temperature without deformation
LDPE, what this bottle is made of, is pretty resistant to most solvents.
Narrow mouth; short neck; clear graduations; excellent elasticity
Cap type: Screw cap with spout; no leakage
Capacity: 250ml 500ml
Closure of stem molded in one piece for leakproof service.
The angled neck and tip provide a uniform stream of liquid and the tip can be cut back if required to increase the flow.
Narrow tip allows for precise watering position and watering volume.
Please kindly make sure the connection between the angled neck and the tube is good before using.

Package includes:
1x 250ml Wash bottle
1x 500ml Wash bottle

Are You a ‘Hot’ Sleeper? Do you wake up covered in sweat- or worse yet, can’t sleep at all? Mattress Cooler USA has the solution- and it doesn’t involve you spending thousands of dollars on fancy cooling mattress pads with a host of useless features! Mattress Cooler Classic Chilled Water Sleep Cooling System puts ‘toasty’ nights behind you at a price that beats every other cool mattress & pillow topper out there! Simplicity is the Key! Our system uses the physics of evaporative cooling to bring reliable all-night-long cooling right to your bed. The cooling unit chills about 3 quarts of water 7-12 degrees below room temperature. This chilled water is then pumped through the thin cooling pad that is placed on your mattress that acts as a heat sink, drawing excess heat trapped between your mattress and your blanket away from your body. Most will find water temps in the low 70’s to be perfect against your body temp of ~99… We are based in the Houston area and generally set our homes thermostat at 76… keeping the house temperature and humidity at reasonable levels while the Mattress Cooler cools us directly all night long using less than a penny of electricity (and about a quart of tapwater) a night. The energy savings are huge because lowering your thermostat forces your AC to chill hundreds of tons of wood, sheetrock, concrete and furniture…but does nothing to directly combat the issue….body heat trapped between your mattress and blankets. The Mattress Cooler removes body heat directly…it’s a simple solution for a simple problem. At Mattress Cooler USA our goal is to help people sleep better and save energy with our simple and affordable chilled water sleep systems. So pick a pad size and click “Add to Cart”. Our small topper is 27” x 63” and can cool one if laid headboard to footboard, or two on a King or Queen if laid across the bed. Our large pad is twice this size at 55”x63” and will cool 2 on a King or Queen. Richard Anderson, Mattress Cooler USA

The PrimoChill Liquid Filling Bottle is a great tool for adding and removing fluid from your system. Filling the bottle with your desired coolant and then squeezing the bottle will allow you to control the amount of added coolant easily. This is a perfect technique for topping your system off. You can also remove the internal straw to use this for removing fluid. Squeezing the bottle will remove some air and act as a vacuum. This can be especially handy when trying to remove fluid pools from tight spaces.

Specifications

Included Parts

Warnings:PrimoChill is not responsible for any hardware damage. Use at your own risk.

Conclusion

By our suggestions above, we hope that you can found water cooling flush for you.Please don’t forget to share your experience by comment in this post. Thank you!