Best Water Cooling 80Mm

An excellent starting block for your Peltier water cooling solution, these large 80mm water blocks offer a convenient, stackable, symmetric design incorporating four chips on a single water block. Stack multiple blocks together to build large water chillers, air conditioners, etc. Excellent flat polished surface guaranteed delivered without any dents. Purchase

The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market. Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. Versatility is the essence of the new NexXxos series! Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins. Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted. These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions.

Model: 14211

Product Name: Water Cooling Radiator

Product Specifications:
– Fitting Thread: G1/4 Inch;
– Fin density: 18 lines per inch
– Color: Black; Product Weight: 106g
– Type: Water Cooling; Material: Aluminum
– Mouth: 9.5 (D) mm; Model Number: 80mm;
– Longer Screw Size: 31 x 3 mm / 1.2” x 0.12”(L*D);
– Size: 105 x 80 x 37 mm / 4.1” x 3.1” x 1.5”(L*W*H);
– Tube Quantity: 8; Fit ID Tube Inner Diameter: 8 -12mm / 0.3” – 0.5”
– Fit ID Tube Outer Diameter: 9.5 mm / 0.37”; Shorter Screw Size: 7 x 3 mm / 0.3” x 0.12”(L*D)

Product Features:
– Pure aluminum fins
– Parts brazing seal as a whole
– Surface treatment: Dark paint
– Joint: disposable stainless steel-band
– The sealing process: vacuum aluminum brazing
– Item Type: Computer Radiator Water Cooling Cooler; Material: Metal
– Can be installed 80mm fan, mounting hole size: 69.5（D）×69.5（W）mm

✔Optimized for high performance at low cost,No weak welds nor leakage.
✔Suitable for computer CPU cooling, industrial frequency conversion driver, laser head cooling, air conditioning evaporator and industrial control cabinet cooling.

Package Included:
1 x Aluminum Heat Exchanger High speed fan
NOTE: Screw holes below is channel pipe, so make sure not to use long screw, will top leaking.

Specifications:
100% brand new and high quality
System features: pure aluminum fins, 1 inch 17 – 20 fin
Fin density: 18 lines per inch
Flat tube number: 8
The sealing process: vacuum aluminum brazing
Parts brazing seal as a whole
Can be installed 80mm fan, mounting hole size: 69.5（D）×69.5（W）mm
Surface treatment: Dark paint
Mouth: 9.5 (D) mm
Joint: disposable stainless steel-band
Suitable for computer CPU cooling, industrial frequency conversion driver, laser head cooling, air conditioning evaporator and industrial control cabinet cooling.

　 Item Type: Computer Radiator Water Cooling Cooler
Material: Metal
Color: Black
Size: 103×80×25mm/4.06×3.15×0.98in (Approx.)

Package includes:
80mm Aluminum Radiator Water Cooling Cooler
Install screws

DIYhz Water Cooling Computer Radiator

Product Specifications:
– Color: Black
– Tube Quantity: 8
– Weight:121g
– Material: Aluminum
– Mouth: 9.5 (D) mm
– Fitting Thread: G1/4 Inch
– Fin Density: 18 lines per inch
– Model Number: 80mm x 80mm
– Fit ID Tube Inner Diameter: 8 -12mm / 0.3” – 0.5”
– Fit ID Tube Outer Diameter: 9.5 mm / 0.37”
– Outer Size: 120 x 80 x 25mm / 4.72” x 3.1” x 0.99”(L*W*H)
– Longer Screw Size: 31 x 3 mm / 1.2” x 0.12”(L*D)
– Shorter Screw Size: 7 x 3 mm / 0.3” x 0.12”(L*D)

Specifications:
– Material: Metal
– Pure aluminum fins
– Parts brazing seal as a whole
– Joint: disposable stainless steel-band
– The sealing process: vacuum aluminum brazing
– Item Type: Computer Radiator Water Cooling Cooler
– Can be installed 80mm fan, mounting hole size: 69.5（D）×69.5（W）mm
★ Optimized for high performance at low cost, No weak welds nor leakage.
★ Suitable for computer CPU cooling, industrial frequency conversion driver, laser head cooling, air conditioning evaporator and industrial control cabinet cooling.

Package Included:
1 x Water Cooling Radiator (This product does not have a fan)
1 x 1m Silicone tube
4 x Short screw
4 x Long screw

Description:

– -Dimensions: 80x80x23mm/3.15×3.15×0.90inch
– -Leak ratio is less than 5*10^(-6) mbar.l/s.
– -Using excellent aluminum materials, soldered and brazed as a whole part.
– -The external diameter of the connector is 9.5 mm. Can be used to connect soft tubes with 7 mm-8 mm inner diameter.
– -Suitable for computer CPU water cooling, industrial variable frequency drivers, head cooling, industrial control cabinet cooling and so on.

Package Includes:

1 Piece Aluminum Cooling Block

Note:

Please allow slightly difference due to manual measurement.
Color may be slightly different since different monitor.

Your satisfaction is our priority. So we would deliver the highest quality products and services to meet your satisfaction.

The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market. Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. Versatility is the essence of the new NexXxos series! Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins. Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted. These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions.

Model: 14212

Product Name : Aluminum Heat Exchanger Radiator

Aluminum heat exchanger can used for CPU, CO2 Laser, etc water cool system.

Package Included:
1 x Aluminum Heat Exchanger

NOTE:Screw holes below is channel pipe, so make sure not to use long screw, will top leaking.

We sell 100% brand new and high quality products. You can get what you want here at a competitive price! Don’t hesitate, just buy it!

Description:

– -Size: 97x76x30mm/3.81×2.99×1.18inch; Installation method: Mount type
– -Using the black oxidation paint to increase the thermal efficiency.
– -8 Pipes effectively increases the cooling area, improve the efficiency of heat exchange.
– -Durable Aluminum Heat Exchanger Radiator using integrated forging process.
– -Suitable for water-cooled computer CPU, industrial variable frequency drives, CO2, air conditioning evaporator and industrial control cabinet cooling.

Package Includes:

1 Piece Computer Radiator Water Cooling

Note:

Please allow slightly difference due to manual measurement.
Color may be slightly different since different monitor.

Conclusion

By our suggestions above, we hope that you can found water cooling 80mm for you.Please don’t forget to share your experience by comment in this post. Thank you!