activeitup 
Nowadays, there are so many products of uxcell heating element in the market and you are wondering to choose a best one. You have searched for uxcell heating element in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings uxcell heating element which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
uxcell Heating Element Coil Wire AC220V 3000W / AC110V 750W Kiln Furnace Heater Wire 7.2mm 800mm
- Wire Diameter: 1.2mm/0.047″
- Coil Diameter: 7.2mm/0.28″
- Length: 800mm/31.45″.
- Rated Voltage/Power: AC220V 3000W / AC110V 750W
- Resistance: 15-16ohm.
- Material: FeCrAl
- Main Color: Silver Tone
- Withstands temperatures up to 2100°F.
- Longer Operating Life, Stronger Oxidation Resistance, Sulfur resistance and Resistivity.
- This Heating Wire should be stretched up to at least twice as original length while using.
This is a heating element wire coil for use in Kilns and furnaces for pottery, metal casting, heat treating, forging, and many other uses.
Notice :
-Please stretch this heating element coil before connecting it to power, or it would burn and cause damage.
-Do NOT cut the heating wire into pieces, the shorter heating wire, the stronger power.
(eg. Cut one 1000W heating wire into two, each heating wire will turn to be 2000W.)
Similar items with 4 stars and above
uxcell Heating Element Coil Wire AC220V 1500W / AC110V 375W Kiln Furnace Heater Wire 5.8mm 560mm 5PCS
- Wire Diameter: 0.8mm/0.031″
- Coil Diameter: 5.8mm/0.23″
- Length: 560mm/22.05″.
- Rated Voltage/Power: AC220V 1500W / AC110V 375W
- Resistance: 29-30ohm.
- Material: FeCrAl
- Main Color: Silver Tone
- Withstands temperatures up to 2100°F.
- Longer Operating Life, Stronger Oxidation Resistance, Sulfur resistance and Resistivity.
- This Heating Wire should be stretched up to at least twice as original length while using.
This is a heating element wire coil for use in Kilns and furnaces for pottery, metal casting, heat treating, forging, and many other uses.
Notice :
-Please stretch this heating element coil before connecting it to power, or it would burn and cause damage.
-Do NOT cut the heating wire into pieces, the shorter heating wire, the stronger power.
(eg. Cut one 1000W heating wire into two, each heating wire will turn to be 2000W.)
Similar items with 4 stars and above
uxcell Heating Element Coil Wire AC220V 2500W / AC110V 625W Kiln Furnace Heater Wire 7mm 750mm 2PCS
- Wire Diameter: 1.1mm/0.043″
- Coil Diameter: 7mm/0.28″
- Length: 750mm/29.53″.
- Rated Voltage/Power: AC220V 2500W / AC110V 625W
- Resistance: 18-19ohm.
- Material: FeCrAl
- Main Color: Silver Tone
- Withstands temperatures up to 2100°F.
- Longer Operating Life, Stronger Oxidation Resistance, Sulfur resistance and Resistivity.
- This Heating Wire should be stretched up to at least twice as original length while using.
This is a heating element wire coil for use in Kilns and furnaces for pottery, metal casting, heat treating, forging, and many other uses.
Notice :
-Please stretch this heating element coil before connecting it to power, or it would burn and cause damage.
-Do NOT cut the heating wire into pieces, the shorter heating wire, the stronger power.
(eg. Cut one 1000W heating wire into two, each heating wire will turn to be 2000W.)
Similar items with 4 stars and above
uxcell 0.2mm 32AWG Heating Resistor Wire Wrapping Nichrome Resistance Wires for Heating Elements 33ft
- Nichrome(Cr20Ni80) heating alloy, high temperature resistant, corrosion resistant , NOT brittle at high temperatures.
- Wire Gauge : AWG32
- Wire Diameter: 0.2mm/0.008inch
- Length: 10m/33ft.
- Resistance: 34.7Ohm/M
- Maximum Operating Temp : 1200C(2192F).
- Material: Nichrome(Cr20Ni80)
- Main Color: Silver Tone.
- Good thermal efficiency, even heating, safe use and long service life.
Description:
Cr20Ni80 is usually used for high temperature furnaces in the heat treating, ceramics, glass, steel, and electronic industries. Other common applications include: heating elements (hair dryers, ovens, toasters, kilns), model and high power rocket motor and recovery ejection charge ignition, heat sealers, poly cutters, foam cutters, resistors, rheostats, current-temperature controls, pyrotechnic ignition, lab inoculating loops, release mechanisms, ceramic support in kilns.
uxcell 1.4mm 15AWG Heating Resistor Wire Wrapping Nichrome Resistance for Heating Elements 16ft
- Nichrome(Cr20Ni80) heating alloy, high temperature resistant, corrosion resistant , NOT brittle at high temperatures.
- Wire Gauge : AWG15
- Wire Diameter: 1.4mm/0.055inch
- Length: 5m/16ft.
- Resistance: 0.7084Ohm/M
- Maximum Operating Temp : 1200C(2192F).
- Material: Nichrome(Cr20Ni80)
- Main Color: Silver Tone.
- Good thermal efficiency, even heating, safe use and long service life.
Description:
Cr20Ni80 is usually used for high temperature furnaces in the heat treating, ceramics, glass, steel, and electronic industries. Other common applications include: heating elements (hair dryers, ovens, toasters, kilns), model and high power rocket motor and recovery ejection charge ignition, heat sealers, poly cutters, foam cutters, resistors, rheostats, current-temperature controls, pyrotechnic ignition, lab inoculating loops, release mechanisms, ceramic support in kilns.
uxcell a14092500ux0360 30M AWG24 0.5mm Nichrome Resistance Resistor Wire for Heating Elements
uxcell 3Meter 10Ft 0.2x12mm Nichrome Flat Heater Wire for Heating Elements
Nichrome is usually used for high temperature furnaces in the heat treating, ceramics, glass, steel, and electronic industries. Other common applications include: heating elements (hair dryers, ovens, toasters, kilns), model and high power rocket motor and recovery ejection charge ignition, heat sealers, poly cutters, foam cutters, resistors, rheostats, current-temperature controls, pyrotechnic ignition, lab inoculating loops, release mechanisms, ceramic support in kilns.
uxcell 3mm 8AWG Heating Resistor Wire Nichrome Resistance Wires for Heating Elements 7ft
- Nichrome(Cr20Ni80) heating alloy, high temperature resistant, corrosion resistant , NOT brittle at high temperatures.
- Wire Gauge : AWG8
- Wire Diameter: 3mm/0.12inch
- Length: 2m/7ft.
- Resistance: 0.154Ohm/M
- Maximum Operating Temp : 1200C(2192F).
- Material: Nichrome(Cr20Ni80)
- Main Color: Black.
- Good thermal efficiency, even heating, safe use and long service life.
Description:
Cr20Ni80 is usually used for high temperature furnaces in the heat treating, ceramics, glass, steel, and electronic industries. Other common applications include: heating elements (hair dryers, ovens, toasters, kilns), model and high power rocket motor and recovery ejection charge ignition, heat sealers, poly cutters, foam cutters, resistors, rheostats, current-temperature controls, pyrotechnic ignition, lab inoculating loops, release mechanisms, ceramic support in kilns.
uxcell 0.4mm 26AWG Heating Resistor Wire Wrapping Nichrome Resistance Wires for Heating Elements 33ft
- Nichrome(Cr20Ni80) heating alloy, high temperature resistant, corrosion resistant , NOT brittle at high temperatures.
- Wire Gauge : AWG26
- Wire Diameter: 0.4mm/0.016inch
- Length: 10m/33ft.
- Resistance: 8.674Ohm/M
- Maximum Operating Temp : 1200C(2192F).
- Material: Nichrome(Cr20Ni80)
- Main Color: Silver Tone.
- Good thermal efficiency, even heating, safe use and long service life.
Description:
Cr20Ni80 is usually used for high temperature furnaces in the heat treating, ceramics, glass, steel, and electronic industries. Other common applications include: heating elements (hair dryers, ovens, toasters, kilns), model and high power rocket motor and recovery ejection charge ignition, heat sealers, poly cutters, foam cutters, resistors, rheostats, current-temperature controls, pyrotechnic ignition, lab inoculating loops, release mechanisms, ceramic support in kilns.
uxcell 10m Long Nichrome Heating Element 12AWG 2mm Dia Heater Wire Coil
The Resistivity of Constantan Wire is slightly hyper than Manganin Resistivity, the curve between resistance and temperature is a linear relationship. The Alloy is limited to make precise resistance, sliding resistance, adjustable rehostat and resistance strain gage which is working below 200 degrees Celsius as it has higher copper thermoelectric emfs. Which also can be used as electric heating element works below 100degrees Celsius.
We have all kinds of Wire Gauge/Length of Nichrome Wire, Alchrome Wire and FeCrAl wire, please kindly have a check in our store or contact our customer service for more details.
Conclusion
By our suggestions above, we hope that you can found uxcell heating element for you.Please don’t forget to share your experience by comment in this post. Thank you!
