Which Is The Best S9 Antminer Cooling

Replacement Asicminer Fan Cooling Fan for Antminer S9, l3+, t9+

Specifications: 4-wire 4-pin connector for easy connection. Seven fan blades and 7500 rpm speed ensure fast cooling. Perfect for Antminer S7/S9. Injection molding technology, exquisite and delicate. High precision double ball bearing. Type: Cooling Fan Material: PBT + Glass Fiber Applicable Models: for Antminer Bitmain S7/S9 Connector: 4Pin 4-Wire Interface Voltage: DC 12V Current: 5.0A Speed: 7500RPM Air Volume: 280.38CFM Wind Pressure: 24.60mmH2O Noise: 64dBA Bearing: High Precision Double Ball Bearing Fan Rotation: from Fan Blade to Left Working Temperature: -10- 70 Degree Celsius Power Range: ±15% of Rated Power Insulation Resistance: >500MΩ Withstand Voltage: Leakage Current 0.5mA 500 v/min 1 Working Life: 80000 Hours at 25 Degrees Ambient Temperature Application: CPU Cooling Workstation/Server Features: Heat Dissipation, 4Pin Power Supply, Dual Ball Bearing Cable Length: 32cm/12.6″ (Approx.) Cooler Length: 12cm/4.72″ (Approx.) Cooler Width: 12cm/4.72″ (Approx.) Cooler Thickness: 3.7cm/1.46″ (Approx.) Notes: Due to the light and screen setting difference, the color of item may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Package Includes: 1 x Cooling Fan

This custom designed fan duct was specifically created for Antminer bitcoin miners, but will work with any 120 mm fan. These will fit most ASIC miners, including DragonMint and Whatsminer M10. As miners, we know how important it is to cool mining equipment and keep temperatures low. Just replace the fan guard with our fan duct using your existing screws and see results immediately. The duct was designed to fit standard 5 in vent hose and to keep air moving. This 5 inch design will have more efficient and better airflow than the 4 inch design! These shrouds are 3D printed using ABS plastic, which is a durable thermoplastic and able to handle to high temperature produced by mining equipment. Does not include 5 in vent hose or clamp. Will not work with Antminer S7 single fan design. Depending on color availability, item may be black or blue.

This product is custom designed and manufactured by Tinker3D. We have worked hard to develop a quality and durable product. Please be aware of other sellers because we can not guarantee their build quality or material. Often times other sellers will use PLA, which is inferior to ABS and can pose a fire risk.

*Antminer is a registered trademark of Bitmain Technologies. We are not affiliated with Bitmain Technologies.

This vent shroud is designed to be directly mounted to 120mm cooling fans, as found on the AntMiner miner models S15, T15, X3, E3, S9, T9, L3, D3, A3 and others. Mounting the shroud to your AntMiner allows you to ventilate or cool your miner with a standard 4 inch dryer vent duct. Removing hot air from your AntMiners environment is one of the most important and easiest ways to keep your mining equipment cool and operating efficiently! This shroud will mount to your AntMiner with the existing screws. There is no need to purchase longer screws as required with other shrouds. This shroud also includes ridges on the 4″ inch connection port to ensure proper clamping of exhaust hoses to prevent leaking and hoses being accidentally detached. These ridges are not present on other shroud models available. A hose clamp is included with each shroud. This shroud can be used as an intake to direct cooler external air to your miner or as an exhaust to remove the hot air from our miner to another area. This is a custom engineered vent shroud brought to you by the team at ArcMyn. Compare our quality to other shrouds and you will find no comparison. Our shrouds are made from high temperature resistant injection molded ABS plastic that can withstand temperatures up to 221 degrees F (105 degrees C)! BEWARE listings that do not specify ABS plastic! Competitors use PLA plastic that will begin to melt and deform at 140 degrees F (60 degrees C)! We have observed miners increasing intake air temperature by over 40 degrees F! These temperatures can easily deform PLA printed shrouds causing exhaust blockages and over-heating! Don’t risk your expensive equipment with inferior products!

Fans for AntMiner S3, S5, S5+, S7, S9, L3, D3. The length of wire is 24cm. DC12V 2A

“This custom designed fan duct was specifically created for Antminer bitcoin miners, but will work with any 120 mm fan. As miners, we know how important it is to cool mining equipment and keep temperatures low. Just replace the fan guard with our fan duct using your existing screws and see results immediately. The duct was designed to fit standard 4 in vent hose and to keep air moving. These shrouds are 3D printed using ABS plastic, which is a durable thermoplastic and able to handle to high temperature produced by mining equipment. Does not include 4 in vent hose or clamp. Will not work with Antminer S7 single fan design. Depending on color availability, item may be black or blue.

This product is custom designed and manufactured by MG3D Designs. We have worked hard to develop a quality and durable product. Please be aware of other sellers because we can not guarantee their build quality or material. Often times other sellers will use PLA, which is inferior to ABS and can pose a fire risk.

*Antminer is a registered trademark of Bitmain Technologies. We are not affiliated with Bitmain Technologies.”

Specifications:
Applicable Models: For Antminer S7 S9
Connector: 4-wire 4Pin interface
Voltage: DC 12V
Current: 2.70A
Speed: 6000RPM
Air volume: 210.38CFM
Wind pressure: 21.60mmH2O
Noise: 64dBA
Bearing: High-precision double ball bearing
Fan rotation: counterclockwise from the direction of the fan blade
Working temperature: -10 °C ~ + 70 °C
Storage temperature: -40 °C ~ + 70 °C
Power Range: ±15% of Rated Power
Insulation resistance: >500MΩ
Withstand voltage: Leakage current 0.5mA 500V / 1 minute
Working life: 80,000 hours at an ambient temperature of 25 degrees
Applications: Workstation/Server CPU Cooling
Fan Frame: Injection Molding, PBT + 30% Glass Fiber + VO Flame Retardant
Wind blade: injection molding, PBT + 30% glass fiber + VO flame retardant
Cable length: Approx. 32cm / 12.6inch
Size: Approx. 12 * 12 * 4cm / 4.7 * 4.7 * 1.6inch
Color: Black
Package weight: 309g

Package List:
1 x Cooling Fan

Note: 
Please allow 1-3cm errors due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.

Antminer S1 S3 S5 S7 S9 T9 L3+ 120mm Fan Duct Cooling Shroud to 4 Inch Vent Hose Extra thick for overclocking made in the USA fits Bitmain – S9, S9I, S9J, L3+, L3++, D3, A3, X3, E3, Z9, Z9 mini, E3, V9, S7, S1, T9, T1, X11, D9, S3, B3, S9 Innosilicon – A4, A4+, A8+, S11, A9, A5, 2X, T2, A2, D9 Dominator, Siamaster, Dashmaster, DecredMaster, ZMaster Dragonmint –D9, B29, T1, 16T,

Brand New Antminer Bitmain Fan Replacement Dual Ball Bearing / Works for ALL Bitmain products like S11, S15, S9i, S9j, S9, S7, S5, V9, T9, D3, A3, L3+, L3++, E3, Z9, Z9 mini, X3 and more. Also works for GPU miners / 120*120*3.8mm /// SHLF1212CHE-03 / Cable Length: 10 inches / 25 cm / 3 Month Warranty

Conclusion

By our suggestions above, we hope that you can found s9 antminer cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!