activeitup 
Nowadays, there are so many products of replacement 6 fin blade for ninja blender in the market and you are wondering to choose a best one. You have searched for replacement 6 fin blade for ninja blender in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings replacement 6 fin blade for ninja blender which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
19,847 Reviews Scanned
6 Fins Blender Blade 4inch Diameter Female Blade for Nutri Ninja iQ 900W BL454-70 BL455-70 and 1000W BL480-70 BL480W-70 BL481-70 BL482-70 BL483-70 Blender Replacement Parts
- PLEASE CHECK – Please check your existing blade for the following 1) Count the FINS IT SHOULD BE 6-FINS. 2) The blade has MALE FINS 3) 3.94″ (10cm) Diameter.
- PLEASE CHECK your blade and compare it with our pics before order, This blade have the Female tip, Please compare with your original one first
- Packing include: 1x 6Fins Bottom Blade Assembly, 2 x Replacement Gasket Rubber (One Gasket Rubber already in the blade )
- Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket. Be careful of the blade when open the package.
- Made of Food Grade BPA Free Plastic and Stainless Steel, Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture. Dishwasher Safe.
Blender Blade Replacement Parts for Ninja 16 oz Blender Cup, 6 Fins Blender Extractor Blade Replacement,4 Blade Assembly For Nutri Ninja Bl770, Bl771, Bl773co,Bl780, Bl660, Bl740
- 【PREFECT FIT】: Blender Blade Assembly for Nutri Ninja BL770, BL771, BL773CO, BL780, BL660, BL740, only fits for 16 oz Cup, 6 Fins, 3.35 inches / 8.5 cm
- 【GOOD REPLACEMENT】: Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture. Dishwasher Safe.
- 【PREMINUM QUALITY】: Made of food grade PP and stainless steel
- The replacement blade has been well-tested by the manufacturer.
- 【PAY ATTENTION】: This blade is Only fit for Ninja 16oz Cup. (Not fit 18oz, 24oz, 32oz)
- 【100% SATISFACTION GUARANTEE】 Please kindly check your Ninja blender is 6 fins blender before purchase. With 3 months warranty: for any reason you’re not completely satisfied,can ask for a replacement or full refund.
Replacement Nutri Ninja 6-Fin Extractor Blade FITS Nutri Ninja Blender Auto iQ BL450-70 BL451-70 BL454-70 BL455-70 BL482-70 Only fit for 18 oz 24 oz.32 oz
- NUTRI NINJA 6 FIN Blade for Nutri Ninja Blender FITS ONLY THIS MODELS 900W BL450-70, BL451-70, BL454-70, BL455-70 1000W BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70,BL484-70
- DOES NOT FIT THIS MODELS BL450-30, BL451-30, BL454-30, BL455-30 1000W BL480-30, BL480W-30, BL481-30, BL482-30, BL483-30,BL484-30
- DOES NOT FIT 16oz CUPS bl770,bl771.
- Ninja Blade Replacement 6 Fins – 3.94″/10cm diameter, effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture.
- NOTE – The replacement rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the bottom blade. Also please sure your blader uses 6 fins.
NUTRI NINJA 6 FIN BLADES WORKS FOR THIS BLENDERS ONLY Nutri Ninja Pro Blender 900w BL450-70, BL451-70, BL454-70, BL455-70 and 1000w Auto-iQ BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70, BL484-70
DOES NOT WORK FOR THIS MODELS Nutri Ninja Pro Blender 900w BL450-30, BL451-30, BL454-30, BL455-30 and 1000w Auto-iQ BL480-30 BL481-30 BL482-30 BL484-30
Anbige 6 Fins Blade for Ninja Blender Replacement Parts Accessories for BL660 BL770 BL740 BL771 BL773CO (1 Blade)
- Fits For Ninja BL660 BL740 Ninja Mega Kitchen System (BL770) Blender/Food Processor with 1500W BL770A 30/ BL770 30/BL773CO 30/BL771 30/BL772 30/ 1200W NINJA BLENDER BL780 30/BL780C0 30
- This Replacement Blade is Made of Stainless steel, Is Dishwasher Safe and Never Needs Sharpening.
- The blade is presented with a plastic asphalt cover, which can keep the blade dry after cleaning, and increase the service life of the blade
- MADE IN CHINA
- Only Fits for 16oz cup
WHYCHOOSE Anbige?
High quality: Anbige are manufactured to meet or to exceed the original manufacturer standards
Variety of kits: we offer a wide range of replacement for blenders
Return policy: your satisfaction is our first priority, if you are not happy with an item, you can return it in accordance with Amazon Return policyThis product is designed and manufacturedby Anbige. Any use of other brand names ormodel designation is made solely for the purposes of demonstratingcompatibility.
Similar items with 4 stars and above
Ninja Blender Replacement Parts 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Blender Blade Assembly Fits 1000w Nutri Ninja Auto-iQ BL480-30 BL482-30 BL682 BL640
- 【Ninja Blade Apply to】7 fins Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 (Please confirm your blender need 7 fins replacement blade before purchasing).
- 【Nutri Ninja Replacement Parts】 Pro Extractor Replacement Blade by Best Potok. 7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel.
- 【Important Tips】Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- 【Packing Include】 1x 7 Fins Bottom Blade Replacement, 2 x Replacement Gasket Rubber ( One Gasket Rubber already on the 7 fins replacement blade). Please check your existing blade by counting the fins before purchase. It Should Be 7fin.
- 【100% SATISFACTION GUARANTEE】 If you are buying before or after purchase any questions, please feel free to contact us, we’ll issue you a full refund or replacement.
One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.
KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
6 Fins Blender Replacement Blade for Ninja Pro BL660 BL663CO BL740 BL770 BL770W BL771 BL773CO BL780 BL780CO Ninja Professional 1200W 1100W 1500 Watts Blender Parts
- PLEASE CHECK OUR SECOND PHOTO BEFORE ORDER, Your blender bottom MUST SAME AS THE PIC SHOWS.
- Compatible with Ninja Professional 1100 Watts Blender BL660 BL663 BL663CO BL740, Ninja Professional 1500 Watts Blender BL770 BL770W BL771 BL773 BL773CO and Ninja Professional 1200 Watts Blender BL780 BL780-30 BL780CO Blenders
- Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket. Be careful of the blade when open the package
- Made of Food Grade BPA Free Plastic and Stainless Steel, Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture. Dishwasher Safe.
- Packing include: 1x 6Fins Bottom Blade Assembly, 2 x Replacement Gasket Rubber (One Gasket Rubber already in the blade )
Blender Replacement Parts for Nutri Ninja, Blade Replacement 6 fins with 32oz Blender Cup and Cup Lid Compatible with Nutri Ninja BL450-70, BL451-70, BL454-70, BL455-70,BL482-70
- 【PACKAGE INCLUDE】: 1x BL450-70 blade,1x 32oz cup,1x cup lid. Please confirm your blender motor has 6 fins (NOT FIT 7 fins).
- 【PREMIUM QUALITY】: Made of food grade PP and stainless steel
- This blender blade has 4 blades, effortlessly pulverizes fruits, vegetables, superfoods and protein shakes into a delicious, smooth texture. The replacement blade has been well-tested by the manufacturer.
- 【COMPATIBLE WITH】: The blade replacement parts compatible with Nutri Ninja Pro Blender 900w BL450-70, BL451-70, BL454-70, BL455-70. The blade is not created or sold by Nutri Ninja.
- 【COMPATIBLE WITH】: Works with Nutri Ninja 1000w Auto-iQ BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70, BL484-70. The blade is not created or sold by Nutri Ninja.
- 【ATTENTION】: The nubs on the bottom that engage with the motor is “6 fins”. DO NOT BUY this if your blade has 7 fins. !!! This blade Only fits 12oz,18oz,24oz, and 32oz blender cup. (NOT fits 16oz)
Ninja Blender Blade Assembly for BL740 B770 BL771 BL770w BL780 BL660 bl663 Not OEM
Not a cheap OEM product, this is a real blade by Ninja. Fits BL740 BL770 BL771 BL772 BL773CO BL780 BL660 BL663 and others
Anbige Replacement Parts 6-Fin Extractor Blade Assembly Fits Nutri Ninja Blender Auto iQ BL450-70 BL454 BL481-70 BL480-70 BL482-70 (1 blade + 1 32oz cup)
- Fits For Ninja BL450 70 900W /BL454 1000W/BL 481 70/ BL480-70/BL482 70 1100W
- This Replacement Blade is Made of Stainless steel, Is Dishwasher Safe and Never Needs Sharpening.
- MADE IN CHINA
- BPA Free
- The blade is presented with a plastic asphalt cover, which can keep the blade dry after cleaning, and increase the service life of the blade
WHYCHOOSE Anbige?
High quality: Anbige are manufactured to meet or to exceed the original manufacturer standards
Variety of kits: we offer a wide range of replacement for blenders
Return policy: your satisfaction is our first priority, if you are not happy with an item, you can return it in accordance with Amazon Return policyThis product is designed and manufacturedby Anbige. Any use of other brand names ormodel designation is made solely for the purposes of demonstratingcompatibility.
Similar items with 4 stars and above
LOUFIMIDON Replacement Bottom Blade 6 Fins, Blender 6 Fins Blade Assembly, Only for Nutri Ninja Pro BL450-70 BL451-70 BL454-70 BL455-70
- ★ Ninja Blade Replacement 6 Fins – 3.94″/10cm diameter, effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture.
- ★ COMPATIBILITY – 6 fins ONLY Nutri Ninja Pro BL450-70 BL451-70 BL454-70 BL455-70
- ★ MATERIAL – Made of Food Grade BPA Free Plastic and Stainless Steel.
- ★ NOTE – The replacement rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the bottom blade. Also please sure your blader uses 6 fins.
- ★ CAREFUL – Be careful of the sharp blade when open your package. Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade before using the replacement gasket.
LOUFIMIDON Replacement Bottom Blade 6 Fins
6 Fins replacement bottom blade effortlessly pulverizes fruits, vegetables, superfoods and protein shakes into a delicious, smooth texture. ONLY fit for 6 fins Nutri Ninja Pro BL450-70 BL451-70 BL454-70 BL455-70.
NOTES :
1. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
2. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding a leak)
3. Do not overfill! To avoid spilling, do not add ingredients past the Max fill line
4. Place the replacement blade onto the cup and screw it tightly until you have a good seal
5. Please make sure it in right place and locked tightly
6. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
Packing including:
1 x 6 Fins Ninja Blender Replacement Blade
1 x Replacement Gasket Rubber
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy replacement 6 fin blade for ninja blender, eg:
- What are Top 10 replacement 6 fin blade for ninja blender for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 replacement 6 fin blade for ninja blender to buy?
- What are Top Rated replacement 6 fin blade for ninja blender to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) replacement 6 fin blade for ninja blender?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for replacement 6 fin blade for ninja blender.
- Before deciding to buy any replacement 6 fin blade for ninja blender, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose replacement 6 fin blade for ninja blender and What you should consider when buying the replacement 6 fin blade for ninja blender and Where to Buy or Purchase the replacement 6 fin blade for ninja blender. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 replacement 6 fin blade for ninja blender of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about replacement 6 fin blade for ninja blender.
Conclusion
By our suggestions above, we hope that you can found replacement 6 fin blade for ninja blender for you.Please don’t forget to share your experience by comment in this post. Thank you!
