Which Is The Best Liquid Cooling For Gpu

Description:
This all-in-one liquid CPU cooler kit provides a 240mm heat sink, water pump, cylindrical water reservoir, dual fans, as well as installation accessories, which will dramatically improve heat dissipation experience, especially in terms of stability, silence, efficiency, and convenience. Liquid cooling simply works better than air cooling and the special design makes it easy for you to protect your valuable CPU.

Specifications:
1. 240mm black heat sink (with screw pack):
Appearance size: 27.5 * 11.8 * 3.2cm
Straight mouth height: 2cm
Diameter of straight tube: about 9.5 mm
Number of waterways: 18
2. LED fan:
Appearance size: 12 * 12cm
Power supply interface: large 4Pin + small 3Pin
3. Universal CPU block (with 4 pcs screws):
Description: Universal for INTEL / AMD Dual Platform (For INTEL 775,1150,1155,1156,1366,) (For AMD: AM2, AM3, AM3 +)
Note: Do not support for AMD4CPU CPU block, bracket supports for AMD INTEL mainstream hole installation.
Screw size: G1 / 4
Outside diameter: 12.9MM
Bottom contact size: 5 * 5cm, thickness 3mm
Material: Bottom: copper; Cover: transparent plexiglass

Pacakage List:
1 x 240mm Heat Sink within Screw Pack
2 x LED Fan
1 x Universal CPU Block within 4 Screws
1 x Universal GPU Block within 4 Screws
1 x Cylindrical Water Reservoir (Including 1 * screw pack, 2 * plastic bracket, 2 * metal bracket)
1 x Transparent Hose
1 x Water Pump with Shock Pad
1 x A Set of Water Pipe Connectors & Hose Clamps & Plugs

The Corsair Hydro x series XD5 RGB pump/reservoir Combo is ready to drive the world’s most demanding custom cooling systems. A xylem D5 PWM pump provides powerful flow rate for multi-block loops and is adjustable via PWM to maximize cooling capacity or minimize noise. Ten built in RGB LEDs, controlled adding a Corsair lighting Node Pro or Commander Pro and powerful Corsair iCUE software, provide a vibrant splash of control to customize your lighting, while an included temperature sensor gives you real-time performance data from inside your system, for accurate cooling adjustment. Universally compatible with G1/4 fittings and with both 120mm and 140mm fan mounting brackets included, The XD5 RGB pump/reservoir is the heart of your custom cooling system. Tech Support # 1-888-222-4346 opt #1

Description:
This all-in-one liquid CPU cooler kit provides 240mm heat sink, GPU block, CPU block, 6 red rigid tubes, water pump, cylindrical water reservoir, dual LED fans, as well as installation accessories, which will dramatically improve heat dissipation experience, especially in terms of stability, silence, efficiency, and convenience. Liquid cooling simply works better than air cooling and the special design makes it easy for you to protect your valuable CPU.

Note: The CPU block and the GPU block are universal type, suitable for INTEL / AMD Dual Platform.  

Specifications:
Package weight: 2613g

Package List:
1 x 240mm Heat Sink with Screw Pack
2 x LED Fan
1 x CPU Block with 4 Screws
1 x GPU Block with 4 Screws
1 x Cylindrical Water Reservoir (Including 1 * screw pack, 2 * plastic bracket, 2 * metal bracket)
6 x Red Rigid Tube
1 x Water Pump with Shock Pad
8 x Two-Touch Fitting
1 x Water Feeder
1 x Water Plug
1 x Nipple Connector
1 x Vent Plug

Specifications:
GPU Compatibility:
Reference RTX2080Ti/2080/2070 GTX1080Ti/1080/1070Ti/1070 5700XT/5700
TDP: 220W
Radiator Dimension: 154×120×27mm
Radiator Material: Aluminum
Tube Length: 380mm
Waterblock Dimension: 72×72×32.5mm
Cold Plate Material: Copper
Pump Current: 0.25A
Pump Speed: 2100±10%RPM
Pump Bearing: Ceramic Bearing
Pump Life Expectancy: 50,000 Hrs
Pump Noise Level: 25dB(A)
Included Fans: 1pcs
Fan Dimension: 120×120×25mm
Fan Speed: 700~1500±10%RPM (PWM)
Max. Air Flow: 62CFM
Noise: 18~26.4dB(A)
Rated Voltage: 12VDC
Operating Voltage: 10.8~13.2VDC
Started Voltage: 7VDC
Rated Current: 0.2A
Power Input: 2.4W
Bearing Type: Hydraulic Bearing

Package Contents:
1 x Closed Loop AIO Liquid VGA Cooler
1 x Mounting Kit
1 x Thermal Grease Tube
1 x User Manual

FAQ: What is the GPU compatibility?
We have limited access to after market VGA cards, you may check official website on how to check the compatibility or contact product support.

ABOUT ID-COOLING
ID-COOLING is specialized in cooling products for desktop PCs and thermal solutions for industrial applications, covering CPU Cooler, VGA Cooler, Case Fan, Server Cooler, Mini Computer Cases, etc. With over 10 years’ experience in this industry, ID-COOLING enjoys a good reputation in innovation and superior quality and service.

Thermaltake Pacific C360 DDC soft tube Water cooling kit is designed for users who likes an efficient and high-quality Combo kit that is ready to sync with 5V RGB Capable motherboards from Asus, Gigabyte, MSI and as rock. The kit includes three pure 12 a RGB sync radiator fans, a Pacific W4 a RGB CPU water block, Pacific pr15-ddc pump/reservoir Combo, Pacific C360 radiator, a bottle of T1000 transparent coolant pure Clear, six Pacific 1/2” Id x 3/4” Od compressions, two meters of V-Tumbler 4T 1/2’‘(12. 7mm) ID x 3/4’‘(19mm) OD transparent tube, an a RGB LED controller, and other accessories. dimension: 520 (L) x 200 (W) x 232 (h)compatibility: intel LGA 2066/2011/1366/1156/1155/1151/1150/775amd AM4/FM2/FM1/AM3+/AM3/AM2+/am2(cpu socket)components Dimension: pump & reservoir: 86. 54 (L) x 62 (W) x 140. 1 (H) mm copper radiator: 29. 5 (H) x 119 (W) x 399 (l) mm tube Dimension: od: 16mm, ID: 12mmfan spec: pwm 5001500 RPM, ( a RGB Controller or 5V MB a RGB sync )coolant: T1000 coolant pure clear kit contents: cpu water block – Pacific W4 a RGB CPU water block x1pump/reservoir- Pacific pr15-ddc pump/reservoir Combo x1copper radiator- Pacific C360 radiator 29. 5 (H) x 119 (W) x 399 (l) mm x1argb fan- pure 12 a RGB sync radiator fan TT Premium Edition x3- a RGB LED controller fittings – Pacific 1/2” Id x 3/4” Od compression – Black x6- Pacific G1/4 90 degree adapter – Black x2coolant- Thermaltake T1000 coolant pure Clear x1 tube- V-Tumbler 4T 1/2’‘(12. 7mm) ID x 3/4’‘(19mm) transparent tube x2 meters accessory- Intel and AMD universal Back Plated & mounting kit- 24pin ATX bridge tool x1- Thermaltake thermal grease x1

The Kraken M22 features two individually addressable RGB channels and our signature infinite-mirror effect for stunning lighting, using CAM’s intuitive controls. It includes precision engineered fans and premium build quality, and is backed by the assurance of a 3-year.

Features:
1. Block with 0.5mm micro channel injection design, all designed only for performance!
2. Block using large flow design, even if low raise pump can use it.
3. Block made by high purity copper, and electroplating to prevent oxidation and makes beautiful.
4. Inlet and outlet can change direction free.
Tips:
1. Please double check the graphics card detail model to ensure compatibility. Please feel free to contact us if you are not very sure.
2.2pcs G1/4 3/8″ ID 1/2″ OD Silver Compression Fittings are included, instead of the ones in the pictures.
3. Prohibit the use of alcohol containing coolant.
4. Graphics card block installation requires a certain skill and experience, because the graphics card manufacturing tolerances may have a certain impact on the block installation, we can assist buyers to solve such problems, but this can not be the basis of returns.
Compatibilities:Gigabyte RTX 2070 Winforce 2X 8G
Compatibilities:Gigabyte RTX 2060 Super Gaming OC 3X 8G
Compatibilities:Gigabyte RTX 2060 Super Winforce OC 8G
Compatibilities:Gigabyte RTX 2060 Super Winforce 8G

The EK-FC Radeon VII water block with nickel plated cooling plate and acetal top directly cools the GPU, memory and VRM as liquid is channeled directly over these critical areas. These newly developed water blocks feature a redesigned cooling engine that has a larger footprint compared to the previous generation of EK Full Cover water blocks. This results in a larger surface area for heat transfer which increases the thermal performance.

The EK Vector Series water blocks use an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker water pumps, or pumps running on low-speeds and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed water flow scenarios.

The base of the block is made of nickel-plated electrolytic copper while the top is made of high-quality acrylic. Sealing is ensured by high-quality EPDM O-Rings. The front corner piece is lit up with LED strip.

This product is compatible with popular RGB sync technologies from all major motherboard manufacturers.

G1/4″ threaded fittings can be used on both sides of the FC terminal.

Enclosed:
– EK-FC Radeon VII series water block
– Mounting mechanism with screw-in brass standoffs
– Necessary mounting screws, nuts, and washers
– 2x EK plug G1/4”
– 6mm Allen key
– Thermal pads
– Thermal grease EK-TIM Ectotherm (1g)

PLEASE NOTE:

Fittings are just for show and are not included!
This product should NOT be installed with any aluminum Fluid Gaming parts!
Radeon VII stock backplates are compatible with EK-Vector Radeon VII water blocks only if installed with the stock backplate screws.

Model: 3831109816165

Conclusion

By our suggestions above, we hope that you can found liquid cooling for gpu for you.Please don’t forget to share your experience by comment in this post. Thank you!