Which Is The Best Incubator Heating Element Kit

110V 80W Incubator Heating Element Replacement Part For 48/56 Egg Incubator – Arduino Compatible SCM & DIY Kits Smart Robot & Solar Panel – , , , , 1x Incubator Heating Element, , , , Note: Only Heate
Specifications: Material: Metal
Color: Silver
Dimensions: 80x20x5.5mm
Wire Length: 30cm
Voltage: 100V
Power: 80W
Fit For: For 48/56 Egg Incubator
Package Included:
1x Incubator Heating Element
Note: Heater included, must be attached to existing wires.

100% brand new and high quality
Features:
Simply remove the damaged heating element and replace with new one.
Can also be used for DIY incubators
Application: Heating element replacement part for incubator, brooder,etc
Heating plate only, other accessories demo in the picture is not included!

Specification:
Voltage: 110V or 220V
Main Material: Metal
Size: app.8cmx1.8cm/3.15×0.71”
Main Color: Silver,As the pictures shown
Quantity: 1 Pc
Note: 1.Transition: 1cm=10mm=0.39inch
2.Please allow 1-3cm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package includes:
1 x Heating Plate (No retail package)

Did you know that at any given time the temperature in your Little Giant Still Air incubator (9300) can vary by up to 5 degrees from the top and bottom and from the center to the corners? In addition, you get variation from the thermostat cycling the heating unit on and off. This temperature variation has a significant impact on your hatch rates. Heat naturally rises, so you need to circulate the hot air from the hot spots to the cool spots for a much more uniform and consistent temperature and better hatch results. The more consistent air temperature also ensures that your thermostat is cycling on and off at the appropriate times, not just when the air around the thermostat heats or cools. Includes step by step installation instructions (Miller Item Number 7300)

Description

100% brand new and high quality. 
Simply remove the damaged he ating element and replace with new one. 
Can also be used for DIY incubators 
Application: Heating element replacement part for incubator, brooder,etc 
Heating plate only, other accessories demo in the picture i s not included! 

Specification: 
Voltage: 110V 
Main Material: Metal 
Size: app.8cmx1.8cm/3.15×0.71” 
Main Color: Silver,As the pictures shown 

Note:  
1.Transition: 1cm=10mm=0.39inch 
2.Please allow 1-3cm error due to manual measurement. pls make sure you do not mind before you bid. 
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! 

Package includes: 
1 x Heating Plate (No retail package)
 

Description：

100% brand new and high quality.   

Simply remove the damaged heating element and replace with new one.   

Can also be used for DIY incubators   

Application: Heating element replacement part for incubator, brooder,etc   

Heating plate only, other accessories demo in the picture is not included!   

Specification:   

Voltage: 110V     

Main Material: Metal   

Size: app.8cmx1.8cm   /3.15×0.71”   

Main Color: Silver,As the pictures shown   

Note:  

1.Transition: 1cm=10mm=0.39inch   

2.Please allow 1-3cm error due to manual measurement. pls make sure you do not mind before you bid.   

3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!  

Package includes:  

1 x Heating Plate (No retail package)

Heating Element Replacement Part Only Heater included, must be attached to existing wires. 110V – Fits all Janoel incubators including 48 egg incubator, 56 egg incubator 96 egg incubator etc.. Can also be used for “DIY” incubators Simply remove the damaged heating element and replace with new one.

100% brand new and high quality
Features:
Simply remove the damaged heating element and replace with new one.
Can also be used for DIY incubators
Application: Heating element replacement part for incubator, brooder,etc
Heating plate only, other accessories demo in the picture is not included!

Specification:
Voltage: 110V or 220V
Power: 80W
Main Material: Metal
Size: app.8cmx1.8cm/3.15×0.71”
Main Color: Silver,As the pictures shown
Quantity: 1 Pc
Note: 1.Transition: 1cm=10mm=0.39inch
2.Please allow 1-3cm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package includes:
1 x Heating Plate (No retail package)

100% brand new and high quality
Features:
Simply remove the damaged heating element and replace with new one.
Can also be used for DIY incubators
Application: Heating element replacement part for incubator, brooder,etc
Heating plate only, other accessories demo in the picture is not included!

Specification:
Voltage: 110V or 220V
Power: 80W
Main Material: Metal
Size: app.8cmx1.8cm/3.15×0.71″
Main Color: Silver,As the pictures shown
Quantity: 1 Pc
Note: 1.Transition: 1cm=10mm=0.39inch
2.Please allow 1-3cm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package includes:
1 x Heating Plate (No retail package)

Conclusion

By our suggestions above, we hope that you can found incubator heating element kit for you.Please don’t forget to share your experience by comment in this post. Thank you!