activeitup 
Nowadays, there are so many products of ice maker supply line 1 ft in the market and you are wondering to choose a best one. You have searched for ice maker supply line 1 ft in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ice maker supply line 1 ft which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Lasco 10-0950 1/4-Inch Compression by 1/4-Inch Compression by 1-Foot Ice Maker Connector
- 1/4 Inch compression x 1/4 Inch compression x 12 Inch
- Stainless steel braided supply
- Use to connect most refrigerater ice maker in-line filters
- Lead free product, meets California AB-1953, Vermont, and new federal standards for low lead applications
- UPC approved product, Country of Origin: CHINA
- Stainless steel braided flex
- Water supply connector
- Used for ice maker connections
- 1/4-Inch compression x 1/4-Inch compression x 5-Feet length
- Carded
Eastman 48383 Stainless Steel Icemaker Connector 1/4" COMP, 1 Ft Length, Silver
- LENGTH: The line length of this ice maker connector is 1-foot
- CONNECTION: This connector has 1/4-inch Compression x 1/4-inch Compression connection
- MATERIAL: This ice maker connector hose is made of high-impact braided 304 stainless steel exterior with a PVC core, nylon reinforcement and a clear vinyl outer shell which provides strength
- DURABLE: The sturdy stainless steel connector makes it durable preventing kinking and has nickel-plated brass nuts which ensure tight fitting
- EASY INSTALLATION: This flexible supply line is very easy to install and resists corrosion
Product Description
The Eastman 48383 Ice Maker Connector has a 1/4-inch comp x 1/4-inch comp connection and is 1-foot long. The supply line features a PVC core, multi-filament braided nylon reinforcement, a clear vinyl outer shell and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping making it long-lasting. It consists of nickel-plated brass nuts which ensure secure fitting.
Eastman’s 1′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. This flexible supply line resists corrosion and enables easy installation.
MAINTAINANCE: For use with water in accessible locations only.
• Shut off the water before installing.
• Inspect product before installing. Do not use if damaged in any way.
• Metal nuts – HAND-TIGHTEN, plus ¼ turn with wrench.
• Do not over tighten.
• Do not use thread lubricants, tape, or putty.
• Do not expose to corrosive materials.
• Over tightening, using lubricants or exposure to corrosive materials can damage nut, connector, valves, or appliance and cause failure, leaking, or flood and property damage.
• This part must be inspected after installation and every six months thereafter. Replace if damaged, leaking or corroded.
• DO NOT reuse.
CAUTION: Improper installation can cause leaks with water damage.
From the Manufacturer
Eastman’s 1′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install. CAUTION: Improper installation can cause leaks with water damage. Ensure washer on the female end of this connector is in place prior to installation. NOTICE: INSTALLATION/MAINTENANCE For use with water in accessible locations only. • Shut off water before installing. • Inspect product before installing. Do not use if damaged in any way. • Metal nuts – HAND-TIGHTEN, plus ¼ turn with wrench. • Do not over tighten. • Do not use thread lubricants, tape, or putty. • Do not expose to corrosive materials. • Over tightening, using lubricants or exposure to corrosive materials can damage nut, connector, valves, or appliance and cause failure, leaking, or flood and property damage. • This part must be inspected after installation and every six months thereafter. Replace if damaged, leaking or corroded. • DO NOT reuse.
Similar items with 4 stars and above
Eastman 48996 Reinforced PVC Icemaker Connector 1/4" Comp x 1/4" Comp x 12" length – Reinforced PVC – 25 Pack
- CONNECTION: This connector has 1/4-inch x 1/4-inch connection
- LENGTH: The line length of this ice maker hose is 1-foot
- MATERIAL: The reinforced PVC material of this appliance hose provides strength and durability preventing it from kinking and crimping
- NUTS: The connector has nickel-plated brass nuts which ensure tight fitting
- APPROVED: This connector meets AB1953 as well as CUPC standards
The Eastman 48996 Appliance Ice Maker Connector has a 1/4-inch x 1/4-inch connection and is 1-foot long. The supply line features reinforced PVC that is designed to prevent kinking and crimping making it long-lasting. It consists of nickel-plated brass nuts which ensure secure fitting.
This appliance hose is poly bagged and meets the AB1953 as well as CUPC standards.
CAUTION: Improper installation can cause leaks with water damage.
Similar items with 4 stars and above
Certified Appliance IM300SS Ice Maker Connectors, 25-Foot
Product Description
Certified Appliance IM300SS Ice Maker Connector (25 Feet Long), Braided Stainless Steel, 1/4 inch Comp X 1/4 inch Comp
From the Manufacturer
Ice Maker Connectors (25-Foot)
Eastman 48392 Flexible Stainless Steel Braided Ice Maker Connector with Brass Nuts, 1/4-Inch Comp X 1/4-Inch Comp, 25-Feet
- LENGTH: The line length of this ice maker connector is 25-feet
- CONNECTION: This connector has 1/4-inch Comp x 1/4-inch Comp connection
- MATERIAL: This ice maker connector hose is made of high-impact braided 304 stainless steel exterior with a PVC core, nylon reinforcement and a clear vinyl outer shell which provides strength
- DURABLE: The sturdy stainless steel supply line makes it durable preventing kinking and has nickel-plated brass nuts which ensure tight fitting
- EASY INSTALLATION: This flexible supply line is very easy to install
Product Description
The Eastman 48392 Ice Maker Connector has a 1/4-inch comp x 1/4-inch comp connection and is 25-feet long. It is an ideal ice maker connector for use, featuring a grade 304 stainless steel braided exterior, plc. core, multi-filament braided nylon reinforcement, and a clear vinyl outer shell. For secure fitting, it comes with nickel-plated brass nuts.
Eastman’s 25′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. This flexible supply line resists corrosion and enables easy installation.
MAINTAINANCE: For use with water in accessible locations only.
• Shut off the water before installing.
• Inspect product before installing. Do not use if damaged in any way.
• Metal nuts – HAND-TIGHTEN, plus ¼ turn with a wrench.
• Do not over tighten.
• Do not use thread lubricants, tape, or putty.
• Do not expose to corrosive materials.
• Over tightening, using lubricants or exposure to corrosive materials can damage nut, connector, valves, or appliance and cause failure, leaking, or flood and property damage.
• This part must be inspected after installation and every six months thereafter. Replace if damaged, leaking or corroded.
• DO NOT reuse
• CAUTION: Improper installation can cause leaks with water damage.
From the Manufacturer
Eastman’s 25′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.
Fluidmaster 12IM72 Ice Maker Connector, Braided Stainless Steel – 1/4 Compression Thread x 1/4 Compression Thread, 6 Ft. (72-Inch) Length
- 72” in length
- ¼ COMP x ¼ COMP Female Compression Thread Connection
- Lead Free
- Easy Install
- Braided stainless steel construction won’t kink or crease
- Heavy-duty nickel-plated brass hex nuts are easy to grip and provide durability
- Replaces old copper or vinyl connectors
- Meets all code requirements
Product Description
This Fluidmaster Braided Stainless Steel 6-Foot (72 in) Length Ice Maker Supply Line connects your Icemaker to the wall water supply. Fluidmaster Icemaker water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors exceed every code requirement in the book for durability. Fluidmaster offers a wide variety of types and sizes, perfect for your home improvement efforts. A proven supply line that won’t crease or tangle even in the tightest of corners. Durability and ease-of-use were at the forefront of this design, with the nickel plated brass hex nuts for easy to grip tightening. A 1/4-Inch female compression thread by 1/4-Inch female compression thread connector with an efficient flow rate. Code approved with a 5 year warranty.
From the Manufacturer
Fluidmaster is the #1 toilet repair brand in the world. Fluidmaster parts are found in more toilets than all other brands. The customer’s first choice and preferred supplier of toilet tank trim since 1957. Fluidmaster’s complete line of toilet repair parts includes; fill valves, flush valves, flappers, tank levers, dual flush valves, bowl wax, toilet repair kits, seals, connectors and more. With manufacturing facilities across the world, Fluidmaster reaches over 90 countries worldwide with unparalleled quality.
Eastman 41033 Stainless steel Icemaker Connector 1/4" Comp x 1/4" Comp x 60" length – Stainless Steel – 12 Pack
- LENGTH: The line length of this ice maker connector is 5-feet
- CONNECTION: This connector has 1/4-inch Comp x 1/4-inch Comp connection
- MATERIAL: This ice maker connector hose is made of high-impact braided 304 stainless steel exterior with a PVC core, nylon reinforcement and a clear vinyl outer shell which provides strength
- DURABLE: The sturdy stainless steel connector makes it durable preventing kinking and has nickel-plated brass nuts which ensure tight fitting
- EASY INSTALLATION: This flexible supply line is very easy to install
Product Description
The Eastman 41033 Ice Maker Connector has a 1/4-inch comp x 1/4-inch comp connection and is 5-feet long. The supply line features a PVC core, multi-filament braided nylon reinforcement, a clear vinyl outer shell and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping making it long-lasting. It consists of nickel-plated brass nuts which ensure secure fitting.
Eastman’s 5′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. This flexible supply line resists corrosion and enables easy installation.
MAINTAINANCE: For use with water in accessible locations only.
• Shut off the water before installing.
• Inspect product before installing. Do not use if damaged in any way.
• Metal nuts – HAND-TIGHTEN, plus ¼ turn with a wrench.
• Do not over tighten.
• Do not use thread lubricants, tape, or putty.
• Do not expose to corrosive materials.
• Over tightening, using lubricants or exposure to corrosive materials can damage nut, connector, valves, or appliance and cause failure, leaking, or flood and property damage.
• This part must be inspected after installation and every six months thereafter. Replace if damaged, leaking or corroded.
• DO NOT reuse
• CAUTION: Improper installation can cause leaks with water damage.
From the Manufacturer
Eastman’s 5′ Stainless Steel Icemaker Connector is the standard in icemaker supply lines. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.
Certified Appliance Accessories Braided Stainless Steel Ice Maker Connector, 15ft
- Braided stainless Steel ice maker connector
- 1/4 inch fem. x 1/4 inch fcm
- Upc, NSF/ANSI 61 & case certified Certified Appliance Accessories recommends installation of this product be performed by a licensed professional
- 15Ft
- Braided stainless steel
- 1/4 -Inch Comp x 1/4-Inch Comp
- 5 year warranty- From the Manufacturer
Product Description
Are you replacing a 5+ year-old ice maker connector hose or hooking up a new ice maker? This 15 ft. Braided Stainless Steel Ice Maker Connector from Certified Appliance Accessories is just what you need. It is corrosion-resistant inside and out plus bends freely for easier installation in cramped spaces.
From the Manufacturer
Ice Maker Connectors (15-Foot)
Everflow Supplies 2662-NL Lead Free Stainless Steel Braided Ice Maker Supply Line with Two 1/4" Fittings on Both Ends, 24"
This is an Everflow Supplies lead free flexible ice maker supply line, made of stainless steel braided tube. In particular, it has a length of 24 inch and it has two 1/4 inch compression fittings on both ends. Furthermore, upc, nsf and csa approved the part for meeting the lead free nsf 61-g standards.
Conclusion
By our suggestions above, we hope that you can found ice maker supply line 1 ft for you.Please don’t forget to share your experience by comment in this post. Thank you!
