activeitup 
Nowadays, there are so many products of hot water cooling pump in the market and you are wondering to choose a best one. You have searched for hot water cooling pump in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings hot water cooling pump which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Thermaltake Pacific C360 Ddc Res/Pump 5V Motherboard Sync Copper Radiator PETG Hard Tube Water Cooling Kit CL-W243-CU12SW-A
- Analog/digital lighting Analog lighting allows a selection of 7 lighting effects with the included a RGB Controller. Connect lights to select 5V RGB Capable motherboards TO utilize digital lighting schemes from as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, and ASROCK polychrome Sync
- All included the C360 hard tube Kit contains a CPU water block, pump/reservoir, radiator, fans, fittings, tubing, and coolant, which are components necessary to complete a CPU water cooling loop
- Slim copper radiator the C360 is engineered with 12 copper flat tubes and 17 fins per Inch. This radiator’s 27mm thick design assures fitment compatibility with most form Factor chassis
- C pro fittings build like a Pro with a new take on compression fittings. Engineered with four Built in O rings to provide maximum leak prevention and a secured compression seal
- Exclusive components W4 a RGB Edition water block, T1000 pure Clear Coolant, and a new pr15 ddc pump/reservoir combo
- 2 years
Thermaltake Pacific C360 DDC hard tube Water cooling kit is designed for users who likes an efficient and high-quality Combo kit that is ready to sync with 5V RGB Capable motherboards from Asus, Gigabyte, MSI and as rock. The kit includes three pure 12 a RGB sync radiator fans, a Pacific W4 a RGB CPU water block, Pacific pr15-ddc pump/reservoir Combo, Pacific C360 radiator, a bottle of T1000 transparent coolant pure Clear, six C-Pro G14 PETG 16mm OD compressions, eight v-Tobler PETG tubes, an a RGB LED controller, and other accessories. p/N: cl-w243-cu12sw-adimension: 520 (L) x 200 (W) x 232 (h)compatibility: intel LGA 2066/2011/1366/1156/1155/1151/1150/775amd AM4/FM2/FM1/AM3+/AM3/AM2+/am2(cpu socket)components Dimension: copper radiator: 29. 5 (H) x 119 (W) x 399 (l) mm tube Dimension: od: 16mm, ID: 12mmfan spec: pwm 5001500 RPM, ( a RGB Controller or 5V MB a RGB sync )coolant: T1000 coolant pure clear kit contents: cpu water block – Pacific W4 a RGB CPU water block x1pump/reservoir- Pacific pr15-ddc pump/reservoir Combo x1copper radiator- Pacific C360 radiator 29. 5 (H) x 119 (W) x 399 (l) mm x1argb fan- pure 12 a RGB sync radiator fan TT Premium Edition x3- a RGB LED controller fittings – Pacific C-Pro G14 PETG 16mm OD compression – Black x6- Pacific G1/4 90 degree adapter – Black x2coolant- Thermaltake T1000 coolant pure Clear x1tube- V-Tobler PETG tube 16mm OD 500mm x 8accessory- Intel and AMD universal Back Plated & mounting kit- 24pin ATX bridge tool x1- Thermaltake thermal grease x1- silicone insert x1. Do not let the pump run dry, when there is no liquid entering the pump turn off your power immediately
Similar items with 4 stars and above
500L/H 10W DC 12V CPU CO2 Water Cooler Cooling Pump Tank Heat Exchanger Mute 60 × 160 mm
- ☞16 DB LOW NOISE—The max noise the water cooling pump tank could generate during work is 16 DB, so quiet and will not bother you
- ☞50000 WORKING HOURS—The water cooling pump tank has a working life of 50000 hours, long service time
- ☞3 PIN CONNECTOR—3-pin connector could be plugged into various devices, convenient to use. Please do not use voltage higher than dc 12 v
- ☞MAX 500 L / H—The max flow rate of the water cooling pump tank is 500 L/H, and max head is 3 meter
- ☞3 PIN CONNECTOR—Except the premium product we provide, we also provide considerate after sale service. Please contact us for any problem about our product. It is our pleasure to service you
Specification:
Flow Rate: max 500L / H
Head: max 3 Meter
Power Connector: 3pin connector
Voltage: DC12V
Power: 10W
Noise: 16 DB
Working life: 50000 hours
Water tank capacity: 250 ml
Threaded connections: G 1/4″ DN8
Product Dimensions: Diameter 60mm × height 160mm
Package:
1 × Water Cooling DC Pump Tank 250ML F CPU CO2 Heat Exchanger Water Cooler 500 L/H
Thermaltake Pacific DIY Liquid Cooling System CL360 64mm Thick Copper Radiator CL-W191-CU00BL-A
- More Rows for More Cooling: Built to perform, this 64mm thick radiator offers a triple-row flat tube design and brass tank for best thermal capacity
- High-Density Copper Fin Design: Designed to accommodate high air volume (Fin per Inch: 14)
- Stainless Steel Frame: Engineered with stainless steel side panels that increase the durability and strength of the radiator while reducing the weight
- Optimized Heat Transfer: Optimized for efficiently pulling heat away from cycling coolant thus achieving maximum heat dissipation at both low and high airflow operation
- High-Quality Manufacturing Process: Baked through a controlled atmosphere soldering line. Materials melt into each other to accomplish optimal thermal transfer from the tubes to the actual fins
Available in 480mm, 420mm and 360mm sizes, Thermaltake Pacific CL radiators are a high-performance copper radiator series with high-density copper fin design and brass tank. Built for 120mm/140mm high-static pressure fans, these radiators are manufactured from premium-quality materials to provide exceptional performance and unrivalled reliability. Constructed with stainless steel side panels guarantees the durability as well as reducing the weight of the radiator. Integrated G1/4″ threads make it easy to install, while rigid connections ensure leak-resistant measures are in place. With an ideal mounting, fitting and flow set-up, the Pacific CL Series meets your cooling needs in every way. 2 year warranty.
Similar items with 4 stars and above
bayite BYT-7A015 DC 12V Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter Low Noise 3M Head 8LPM 2.1GPM
- Circulation pump is non-self-priming pump (0 Suction Height). Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft. Max system pressure: 10Bar(145PSI) . This doesn’t mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure
- 1/2″ Male thread on the pump. The OD of the brass coupler is 3/8”(10mm). Plug type: 2.1mm x 5.5mm female
- Power source: DC 12V(POWER ADAPTER INCLUDED). Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours. Please note: If you use this pump for circulating wort it should be cleaned out after using it
- Max circulating water temperature: 100°C/212°F. It’s submersible but can’t be immersed in hot water exceeding 50°C/122℉
- One year warranty: replacement or full refund without return
It’s perfect for the home solar water heating systems or other circulation pump application.
Brushless Motor,Super long working life,low consumption and low noise
Power source: DC 12V
Rated current: 0.7A
Low noise: 30db at 1 metre
Service life: 30000 hours up
Inlet/Outlet: 1/2″ male thead. Fit both 1/2″ NPT and BSP female thead. We’ve tested. w/ two brass coupler
Circulation pump is non-self-priming pump (0 Suction Height).
Max Flow Rate: 8L/Min(2.1GPM)
Max Water Head: 3 metre(9.8ft)
Max system pressure: 10Bar(145PSI). This doesn’t mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure.
Max circulating water temperature: 100°C/212°F. Can’t be immersed in hot water exceeding 50°C/122℉
Please note: If you use this pump for circulating wort it should be cleaned out after using it.
Item included:
1x DC 12V Solar Hot Water Circulation Pump
1x AC 110V- 240V to DC 12V 2A Power Supply Adapter
Grundfos 59896155 SuperBrute Recirculator Pump small RED
bayite BYT-7A006 DC 12V Solar Hot Water Heater Circulation Pump Low Noise 3M Discharge Head 2.1GPM
- Circulation pump is non-self-priming pump (0 Suction Height). Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft. Max system pressure: 10Bar(145PSI) . This doesn’t mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure
- 1/2″ Male thread on the pump. The OD of the brass coupler is 10mm. NO POWER ADAPTER INCLUDED
- Power source: DC 12V(NOT INCLUDED), Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours. Please note: If you use this pump for circulating wort it should be cleaned out after using it
- Max circulating water temperature: 100°C/212°F. It’s submersible but can’t be immersed in hot water exceeding 50°C/122℉
- One year warranty: replacement without return
CORSAIR HYDRO Series H115i PRO RGB AIO Liquid CPU Cooler,280mm, Dual ML140 PWM Fans, Intel 115x/2066, AMD AM4
- Dynamic Multicolor RGB Lighting: Vibrant RGB LED pump head produces vivid lighting effects to match your build
- Powered by Magnetic Levitation: Three low noise 140mm ML Series magnetic levitation PWM fans deliver incredible airflow and produce just 25 dB of noise at full speed
- Powerful Software: CORSAIR iCue software allows you to adjust RGB lighting, individual fan speeds, and pump speed while monitoring CPU and coolant temperatures
- Zero RPM Mode: Zero RPM cooling profile in CORSAIR iCue software allows fans to stop entirely at low temperatures, eliminating fan noise
- Compatible Sockets: Intel LGA 1150, 1151, 1155, 1156, 1366, 2011, 2011 3, 2066 and AMD AM2, AM3, AM4, FM1, FM2
Taco 006-B4 Bronze Circulator Pump 3/4-Inch Sweat
- Flow Range: 0-10 GPM
- Head Range: 0-9 Feet.
- Minimum Fluid Temperature: 40F.
- Maximum Fluid Temperature: 220F.
- Maximum Working Pressure: 125 psi.
- Connection Sizes: 3/4 Sweat.
- Standard High Capacity Output-Compact Design – Quiet, Efficient Operation
- Direct Drive-Low Power Consumption – Unique Replaceable Cartridge Design-Field Serviceable
- Self-Lubricating – No Mechanical Seal – Unmatched Reliability –Maintenance Free
- Cast Iron, Flanged or Bronze Construction with Sweat, Threaded or Union Connections
- This product runs using a 0.025 (1/40) horsepower motor
Product Description
Bronze Circulator Pump 3/4-Inch Sweat
From the Manufacturer
The TACO 006 is designed for circulating hot or chilled fresh water in open or closed loop applications. Typical uses include hydronic heating, domestic hot water recirculation, hydro-air heating/cooling, heat recovery units, water source heat pumps, drain down open loop solar systems and potable water applications. The unique, replaceable cartridge contains all of the moving parts and allows for easy service instead of replacing the entire circulator. The compact, low power consumption design is ideal for high efficiency jobs.
Grundfos GRU-595916 595916
- TLC = Timer, Line Cord, 6-Foot
- Flow range: 0 – 9 U.S. GPM, Head range: 0 – 6-Foot
- Motors: Single phase, 115V. Supply Voltage:115-120 VAC, 60 hertz, Contact Rating: 16 amps
- Connection: 3/4-Inch M by 3/4-Inch FNPT.Maintenance-free, low energy consumption, easy to install, quiet running
- The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems
Product Description
Up1510su7ptlc features: -Recirculator pump kit.-Material: Bronze and stainless steel.-Aluminum stator housing.-Stainless steel spherical separator.-Stainless steel / tungsten carbide rotor.-Stainless steel, epdm, pu, ptfe, graphite rotor and impeller.-Brass ms 58 pump housing.-Ppo isolation valve.-Pa66/6 terminal box cover, motor cover.-Lexan light.-Pvc cable, cable relief.-Epp 55 insulating cover.-Epdm o’rings.-Pom check valve.-Proud to bring the comfort and savings of hot water recirculation to the existing homes market with the comfort series instant hot water system.-Stainless steel circulator, complete with timer and 10-foot power cord, is installed directly to the hot water discharge on the water heater.-Comfort valve is installed under the sink at the fixture furthest from the water heater, and the system uses the existing cold water line to return hot water to the water heater.-Circulator pumps, series up, are specifically designed for heating systems.-Suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems.-Wet rotor design.-Composite impeller.-Eliminates and prevents corrosive effects of fresh water.-Maintenance-free, low energy consumption, easy to install, quiet running.-Improved performance and efficiency.-Pre-program usage times to save power.-No additional wiring required.-Adds to savings by operating pump by sensing the water temperature.-Insulation class: F.-Flow range: 0 – 65 us gpm.-Head range: 0” – 72”.-Maximum fluid temperature: 150 f (66 c).-Minimum fluid temperature: 36 f (2 c).-Maximum working pressure: 145 psi.-Connection: 075” m x 075” fnpt.-Tlc : Timer, line cord. Includes: -Includes timer and line cord.-Comfort system includes a up15-10su7/tlc circulator and the revolutionary comfort valve. Specifications: -Up15-10su7p/tlc comfort series 1/25 hp recirculator.-Recirculator engine: 1/25 hp.-Power consumption: 25watts.-Motors: Voltage: 115volts, phase: 1. Dimensions: -Dimension.
From the Manufacturer
The Grundfos UP15-10SU7P/TLC Comfort Series 1/25 HP Recirculator Pump is a Comfort Series Instant Hot Water System. Includes timer and line cord. Grundfos Pumps is proud to bring the comfort and savings of hot water recirculation to the existing homes market with the Comfort Series Instant Hot Water System. The Comfort System includes a Grundfos UP15-10SU7/TLC circulator and the revolutionary Comfort Valve. The stainless steel circulator, complete with timer and 10-foot power cord, is installed directly to the hot water discharge on the water heater. The Comfort Valve is installed under the sink at the fixture furthest from the water heater, and the system uses the existing cold water line to return hot water to the water heater. The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems.
NZXT Kraken X72 360mm – All-in-One RGB CPU Liquid Cooler – Infinity Mirror Design – Powered by CAM
- ADVANCED LIGHTING MODES: With an infinity mirror design, add amazing color and lighting to your CPU cooler for a fully dynamic lighting experience
ENGINEERED FOR PERFORMANCE: Engineered to achieve superior cooling while keeping noise levels to a minimum - MASTER YOUR CONTROL: Using CAM, manage the performance with precision and make changes quickly, using the desktop or mobile app. You can even monitor pump speed and liquid temperature.
- ALL-NEW RADIATOR FANS: The Aer P radiator fans included are designed for liquid-cooling perfection
- providing silent operation, durability, and powerful cooling performance
- REINFORCED EXTENDED TUBING: Fine nylon sleeves are added to strengthen the rubber tubing and act as a protective layer, shielding your Kraken cooler tubes from potential damage during handling
- WARRANTY: 6 Years
Conclusion
By our suggestions above, we hope that you can found hot water cooling pump for you.Please don’t forget to share your experience by comment in this post. Thank you!
