activeitup 
Nowadays, there are so many products of everkleen water heater heating element in the market and you are wondering to choose a best one. You have searched for everkleen water heater heating element in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings everkleen water heater heating element which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Rheem SP20060 Electric Water Heater Tune-Up Kit
Product description
Rheem SP20060 Electric Water Heater Tune-Up KitRheem SP20060 Electric Water Heater Tune-Up Kit Features: Repair Kit Plumber’s Pack
From the Manufacturer
Repair your water heater rather than replace it with the Rheem PROTECH Electric Water Heater Tune-Up Kit. This OEM quality Electric Water Heater Tune-Up Kit provides a quick and easy way to repair the most common items on an electric water heater. The tune up kit helps prolong the life of your water heater by renewing the key electrical components of your water heater. The kit includes two 4,500-watt, 240-volt water heater High Watt Density 1” screw-in elements with gaskets, one Therm-O-Disk 240-volt lower thermostats and one Therm-O-Disc upper thermostat. This kit is for units that have 1” screw in water heater elements. They will not fit Rheem Marathon or Eclipse water heaters.
Camco 02583 4500W 240V Screw-In Foldback Water Heater Element – Low Watt Density
Product Description
02583 Wattage: 4500 Features: -Screw-In Element.-Element comes with one gasket.-Carded.-8″ Minimum tank diameter.-150+ Watts per square inch. Specifications: -1500W Voltage: 120.-2000W Voltage: 240. Dimensions: -Dimensions: 14.5″H x 3.63″W x 1.75″ D.
From the Manufacturer
Camco’s 4500W 240V screw-in type low watt density water heater elements are better suited for areas with problem water (hard water, lime, etc.) Most LWD elements are a fold-back style and provide no loss of efficiency yet reduce lime deposit buildup. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and all water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
Camco 02342/02343 4500W 240V Screw-In Water Heater Element – High Watt Density
Product Description
4500W/240V Screw-In Element 02343
From the Manufacturer
Camco’s 4500W 240V screw-in type high watt density water heater elements can be used in all screw-in replacement situations if the same wattage and voltage are used. High Watt Density water heater elements are the most common and the same type of element provided with most new water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and most water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
Camco 02282/02283 3500W 240V Screw-In Water Heater Element – High Watt Density
Product Description
3500W/240V Screw-In Element 02283
From the Manufacturer
Camco’s 3500W 240V screw-in type high watt density water heater elements can be used in all replacement situations if the same wattage and voltage are used. High Watt Density are the most common and the same type of element provided with most water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and all water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
Dual voltage 300 to 1300 Watt 110V Black Travel Kit Great for Heating Boiling Chocolate Coffee Tea Drinking Water Heater Immersion Portable Boiler stainless steel Element Coil USA to Europe A
- HIGH QUALITY— Made of high quality stainless stain. Takes 1-2 minutes to heat water for tea or coffee!!
- SPECIFICATIONS — Heating element is at 6.3 inches and cable length at 32.5 inches. Always remove the plug of the immersion heater before and after use to avoid breakage. Comes with USA TO EUROPE ADAPTER!!!
- PORTABLE — Lightweight, portable and ergonomic ideal for office use or travel. . Great for travelers
- EASE OF USE — For best results used with glass, ceramic or stainless steel containers only. Just plug into the wall socket and your set to go!!!
- 100% MONEY BACK GUARANTEE — Here at Isource, we believe in our product and offer 100%, money back guarantees.
Portable heater for warming coffee, tea, soup, and more. A perfect travel companion. Ideal for home, office or travel. Comes with Europe to USA adapter!
Kingwork UL-Listed Bucket Heater, 1000 Watts Immersion Bucket Water Heater with Thermostat and Electric Immersion Heating Element, Submersible Water Heater with Auto Shutoff
- Applications – This Kingwork heavy duty and portable bucket water heater heats water only. Use for cold weather and travel. Perfect for winter time jobs.
- Thermostat Feature – The silver-colored stainless steel tube contains a thermal overload safety switch, it can automatically cycle on and off as needed to maintain water temperature. It will not overheating and save power.
- Guard – The stainless-steel guard on the electric bucket heater protects the heating element from directly contacting persons or animals. The heater is safe for use in all pails, buckets and bathtubs, make sure the container designed to contain boiling water.
- Simple Operation – Immerse in water at proper level. Plug into any grounded wall outlet. Check power indicator light in plug to make sure unit is on. It will heat water continuously over 180 degrees F and towards boiling.
- UL-Listed to the safety standards, Package included: 1 pack bucket heater + Manual.
– The Kingwork bucket heater designed to heat water only. Use for construction industry, animal husbandry, car washing, indoor use and many other jobs in cold weather.
– Bucket Water Heater is only to be immersed up to the point of the electrical connection. Water level about 8” deep.
– The size of this electric immersion heater is perfect rested in 5 gallon bucket.
– Handle and cord cannot be submerged.
– The bucket heater is safe for use in all pails, buckets and bathtubs, will not damage plastic containers, make sure the container designed to contain boiling water.
– 1000W 120V
– UL-Listed.
Warning:
Please don’t use extension cord.
Never leave it unattended.
If the black plastic handle is too hot, please unplug it, wait until cool before using,otherwise a fire hazard will result.
Conclusion
By our suggestions above, we hope that you can found everkleen water heater heating element for you.Please don’t forget to share your experience by comment in this post. Thank you!
