activeitup 
Nowadays, there are so many products of digital temperature cooling controller in the market and you are wondering to choose a best one. You have searched for digital temperature cooling controller in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings digital temperature cooling controller which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding
- Plug and play design, easy to use
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Support reading with Centigrade or Fahrenheit unit
- Maximum output load: 1100W(110V)
- Dual display window, be able to display measured temperature and set temperature at the same time
bayite Temperature Controller 1650W BTC211 Digital Outlet Thermostat, Pre-wired, 2 Stage Heating and Cooling Mode, 110V – 240V 15A
Inkbird Pre-Wired Dual Stage Digital Temperature Controller Outlet Thermostat 110V, 1100W Heating and Cooling Multi-purpose Controllers for Aquaria, Reptile Keeping, and Brewing Fermentation Kegerator
- Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
- Be able to connect with refrigeration and heating equipment at the same time.
- Easily calibrated.
- Can display in Centigrade or Fahrenheit.
- Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
Features:
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Buzzer Alarm: High and Low Temperature Alarm
Temperature calibration
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
It has certificate of EMC, LVD, RoHS, FCC compliance.
Package Content:
1x Temperature controller ITC308
1x Manual
Electronic Thermostat Controller, DROK Digital Temperature Control Board DC 6-30V -50 to +110 Degree Celsius High Accuracy LCD Digital Micro Temp Control Switch Module with Waterproof Sensor Probe
- DROK electronic thermostat controller power supply is DC 6-30V or 5V micro USB
- control load current is 10A (Max)
- test temperature is -50~110℃
- sensor length is 0.5 meter.
- High current: Our digital temperature control board adopts high density PC board installation technology, the switch capacity can be up to 10A in spite of the small size.
- LCD display: Designed with bright LCD display, people can check the temperature clearly from any angle.
- User-friendly functions: The thermostat module has the function of real-time temperature reporting, temperature correction function, high-temperature alarm, emergency stop function and support UART Set, which make the module reliable and easy to use.
- Applications: With waterproof temperature sensor probe, it can be widely used for domestic appliance, office machine, audio, equipment, automobile, etc. （Remote control TV receiver, monitor display, Audio,Raspberry Pi equipment high rushing current use application）
Parameter:
Power supply: DC6.0~30V or 5V Micro USB
Temperature control range: -50℃~110℃
Temperature control precision: 0.1℃
Measuring input: NTC10K/B3950
Refresh rate: 0.5 second
Output type: relay output 10A
Probe type: waterproof probe, L: 0.5m
Set Parameter:
Working mode / setting temperature / hysteresis temperature setting:
1. In the running interface, short press the “SET” button to enter the quick setting interface.
2. After entering the quick setting interface, switch the parameter to be set (working mode/setting temperature/ hysteresis temperature) by short pressing the “SET” button.
3. Change the parameter value by pressing ‘UP’ or ‘DOWN’ after select parameter.
4. Hold press “SET” button for more than 3 seconds or have no any button operation for 6 seconds, it will save the parameters and exit the quick setting interface automatically.
Set ALA/OPH/OFE (Alarm temperature / delay starting setting / temperature correction:):
1. In the running interface, hold press the “SET” button for more than 3 seconds, enter the parameter setting interface.
2. After entering the parameter setting interface, switch the parameter to be set (alarm temperature/delay starting setting/temperature correction) by short pressing the “SET” button.
3. Use the “UP” “DOWN” button to change the parameter.
4. Hold press “SET” button for more than 3 seconds or have no any button operation for 6 seconds, it will save the parameters and exit the parameter setting interface automatically.
Package Including:
1x Electronic Thermostat Controller
CHENBO(TM)3 Pack 12V DC Digital Cooling/Heating Thermostat Temp Control -50-110 °c Temperature Controller 10A Relay Module With Waterproof Sensor Probe
Inkbird 10A 110V Digital Thermostat with Heat and Cool Relays ITC-308 Home Brewing
- [Convenient Design] Plug and play, easy to use.
- [Reading Mode] Support reading with Centigrade or Fahrenheit unit.
- [Safe] Maximum output load: 1100W(110V).
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
Century Digital Cooling Thermostat Controller for Cooling Device 40-108°F
- ✓ EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius.
- ✓ EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
- ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.
- ✓ VARIETY OF USES: Our thermostat controller can be used for fans and ventilation. Max load 400w or 1000btu for refrigerators and ACs. Easily keep your various environments in their ideal temperature range. This product is NOT for HEATING products.
- ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
The digital cooling controller is designed to control cooling device in order optimize crop-specific growing requirements. Easy to use, a digital display controls the devices’ output temperature, which ranges from 40 to 108 °F (5 – 42°C). Depending on the user’s preference, the temperature can be toggled to display in degrees fahrenheit or celsius. Our digital thermostats feature a standard, three-prong ground plug and are compatible with all heat mats. Provides constant optimal temperatures. Protect your safety with isolated strong wires and ETL certificate. How to adjust temperature setting: Press and hold ‘Set’ button for 3 seconds to enter the temperature selection mode, Press ‘Up’ or ‘Down’ button to adjust the temperature, Press ‘Set’ button again to select the displayed temperature as the target, Press ‘Set’ button to display the preset temperature. Current measured temperature will be shown when no button is activated.
Conclusion
By our suggestions above, we hope that you can found digital temperature cooling controller for you.Please don’t forget to share your experience by comment in this post. Thank you!
