Best Custom Water Cooling Pc
Nowadays, there are so many products of custom water cooling pc in the market and you are wondering to choose a best one. You have searched for custom water cooling pc in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings custom water cooling pc which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Thermaltake Pacific DIY OD 16mm (5/8") x ID 12mm (1/2") Water Cooling PETG Hard Tube Bending Kit CL-W093-AL00BL-A
- Near Perfect Bends: Essential for making precise bends when using 16mm OD PETG tube
- Mandrels: Includes Mandrels for 45/90/180/360 degree bends
- Pipe Cutter: Professional Grade Pip Cutter provides perfect beveled edge cuts
- Insert: Silicone Tube insert prevents kinks and help promote smooth bends while keeping inner wall diameter
- Mounting: Pre-drilled holes allow easy mounting of mandrels to flat surface
- Recommended use of soapy water assists with tube insertion and tube heating
- Warranty: 2 Years
Thermaltake Pacific C360 Ddc Res/Pump 5V Motherboard Sync Copper Radiator Soft Tube Water Cooling Kit CL-W253-CU12SW-A
- Analog/digital lighting – Analog lighting allows a selection of 7 lighting effects with the included a RGB Controller. Connect lights to select 5V RGB Capable motherboards TO utilize digital lighting schemes from as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, and ASROCK polychrome Sync
- All includded – the C360 soft tube Kit contains a CPU water block, pump/reservoir, radiator, fans, fittings, tubing, and coolant, which are components necessary to complete a CPU water cooling loop
- Slim copper radiator – the C360 is engineered with 12 copper flat tubes and 17 fins per Inch. This radiator’s 27mm thick design assures fitment compatibility with most form Factor chassis
- Exclusive components – W4 a RGB Edition water block, T1000 pure Clear Coolant, and a new pr15-ddc pump/reservoir combo
- 2 years
Thermaltake Pacific C360 DDC soft tube Water cooling kit is designed for users who likes an efficient and high-quality Combo kit that is ready to sync with 5V RGB Capable motherboards from Asus, Gigabyte, MSI and as rock. The kit includes three pure 12 a RGB sync radiator fans, a Pacific W4 a RGB CPU water block, Pacific pr15-ddc pump/reservoir Combo, Pacific C360 radiator, a bottle of T1000 transparent coolant pure Clear, six Pacific 1/2” Id x 3/4” Od compressions, two meters of V-Tumbler 4T 1/2’‘(12. 7mm) ID x 3/4’‘(19mm) OD transparent tube, an a RGB LED controller, and other accessories. dimension: 520 (L) x 200 (W) x 232 (h)compatibility: intel LGA 2066/2011/1366/1156/1155/1151/1150/775amd AM4/FM2/FM1/AM3+/AM3/AM2+/am2(cpu socket)components Dimension: pump & reservoir: 86. 54 (L) x 62 (W) x 140. 1 (H) mm copper radiator: 29. 5 (H) x 119 (W) x 399 (l) mm tube Dimension: od: 16mm, ID: 12mmfan spec: pwm 5001500 RPM, ( a RGB Controller or 5V MB a RGB sync )coolant: T1000 coolant pure clear kit contents: cpu water block – Pacific W4 a RGB CPU water block x1pump/reservoir- Pacific pr15-ddc pump/reservoir Combo x1copper radiator- Pacific C360 radiator 29. 5 (H) x 119 (W) x 399 (l) mm x1argb fan- pure 12 a RGB sync radiator fan TT Premium Edition x3- a RGB LED controller fittings – Pacific 1/2” Id x 3/4” Od compression – Black x6- Pacific G1/4 90 degree adapter – Black x2coolant- Thermaltake T1000 coolant pure Clear x1 tube- V-Tumbler 4T 1/2’‘(12. 7mm) ID x 3/4’‘(19mm) transparent tube x2 meters accessory- Intel and AMD universal Back Plated & mounting kit- 24pin ATX bridge tool x1- Thermaltake thermal grease x1
Similar items with 4 stars and above
EKWB EK-KIT Performance Series PC Watercooling Kit P360
- Universal CPU water block: EK-Supremacy EVO (incl. LED diode, mounting- & thermal material)
- Water pump-reservoir combo: EK-XRES 140 Revo D5 PWM (incl. pump)
- Radiator: EK-CoolStream PE 360 (Triple)
- Compression fittings: EK-ACF Fitting 10/13mm (3/8” – 1/2”) – G1/4 Nickel (6 pcs)
- Radiator fan: EK-Vardar F3-120 (1850rpm) (3pcs)
The EK-KIT P360 is the ultimate liquid cooling kit dedicated to all users who seek the easiest way to start with their first custom loop at the best price-performance ratio on the market! Everything you need to assemble your first custom loop with carefully chosen components that will last you a long time!This water cooling kit is compatible with the following CPU sockets: Intel LGA-1150/1151/1155/1156, Intel LGA-2011(-3), Intel LGA-2066, AMD Socket AM4.
Bewinner DIY 240mm Water Cooling Kit, DIY 240mm Cooler CPU/GPU Block Pump Reservoir with LED Fan Heat Sink Computer Water Cooling Connectors Kit, All-in-one Liquid CPU Cooler Kit
- 【Professional Water Cooling Kit】All included:240mm heat sink+CPU/GPU cooling Block+2pcs LED fans+water pump with shock pad+Cylindrical Water Reservoir+Transparent Hose+A Set of Water Pipe Connectors.
- 【Super Water Circulation Cooling System】18 Pipe Aluminum Heat Exchanger Radiator,9W 600L / H Waterproof G1/4 Thread size High quiet water Pump,160mm High capacity Cylindrical Water Reservoir make the circulation system clear and visible,The extreme performance dual LED fans offer a high air static pressure.
- 【Universal Water Cooling Block】The CPU water cooling block made of copper and transparent plexiglass suitable for INTEL / AMD Dual Platform,the 0.8MM parallel waterway G1/4 universal thread GPU water cooling block made of copper and POM high temperature materials support 9.5mm ID / 12.7mm OD PU tube,or 10mmID/16mmOD solid tube,or 8mmID/12mmOD silicon tube.
- 【Complete Accessories】A Set of Water pipe joints & hose clamp & plug and a Inner diameter 8mm/Outer diameter 12mmTransparent hose,So you don’t have to worry about installation at all.
- 【100% Satisfaction Guarantee】 If you have questions about the product or are not satisfied with it, please contact us at any time, we will provide you with a best solution. Your satisfaction is our main concern.
This all-in-one liquid CPU cooler kit provides a 240mm heat sink, water pump, cylindrical water reservoir, dual fans, as well as installation accessories, which will dramatically improve heat dissipation experience, especially in terms of stability, silence, efficiency, and convenience. Liquid cooling simply works better than air cooling and the special design makes it easy for you to protect your valuable CPU.
1. 240mm black heat sink (with screw pack):
Appearance size: 27.5 * 11.8 * 3.2cm
Straight mouth height: 2cm
Diameter of straight tube: about 9.5 mm
Number of waterways: 18
2. LED fan:
Appearance size: 12 * 12cm
Power supply interface: large 4Pin + small 3Pin
3. Universal CPU block (with 4 pcs screws):
Description: Universal for INTEL / AMD Dual Platform (For INTEL 775,1150,1155,1156,1366,) (For AMD: AM2, AM3, AM3 +)
Note: Do not support for AMD4CPU CPU block, bracket supports for AMD INTEL mainstream hole installation.
Screw size: G1 / 4
Outside diameter: 12.9MM
Bottom contact size: 5 * 5cm, thickness 3mm
Material: Bottom: copper; Cover: transparent plexiglass
1 x 240mm Heat Sink within Screw Pack
2 x LED Fan
1 x Universal CPU Block within 4 Screws
1 x Universal GPU Block within 4 Screws
1 x Cylindrical Water Reservoir (Including 1 * screw pack, 2 * plastic bracket, 2 * metal bracket)
1 x Transparent Hose
1 x Water Pump with Shock Pad
1 x A Set of Water Pipe Connectors & Hose Clamps & Plugs
Similar items with 4 stars and above
PC Water Cooling Kit, DIY Computer Water Cooling Set Water Row, SC600 Water Pump, Water Tank and Fans All-in-one Liquid CPU Cooler Kit
- Exclusive Components: SC600 Water Pump, Water Row, Water Tank,Cooling Fan Featuring exceptional performance and unrivalled reliability.
- Good Heat Dissipation: Customliquid cooling can give you much better cooling performance compared to all inone cooling systems and traditional air coolers as you can make specific tweaks to your system to have it perform better.
- Easy to Install: Small size, no space, the product is novel and easy to install, can be placed on the desktop.
- Wide Compatibility: The kit contains all the bits you need to customise your water cooling set up and have it match the rest of your system.
- It is suitable for your own cooling equipment, so that you can fully experience the fun of DIY.
1. Water Row
Size: Approx. 275 * 120 * 32 mm/ 10.8 * 4.7 * 1.3 in
Interface: G1/4 thread
Composition: single layer flat tube, flat tube 18
2. SC600 Water Pump
Rated voltage: 12V motherboard small 3-pin plug
Input current: 0.8A ±10%
Motor operating speed: 5600RPM ± 5%
Flow rate: 600L/H±10%
Startup voltage: 6V
Size: Approx. 71 * 56 * 46 mm/ 2.8 * 2.2 * 1.8 in (not include brackets and connectors)
Wiring color definition: red positive / black negative / white speed
Ceramic bearing, graphite bushing, very quiet, no water idling during use
Bracket hole distance: starting from the center of the hole, width 51.50mm, length 31.50mm
Size: Approx. 120 * 120 * 25 mm/ 4.7 * 4.7 * 1.0 in
Net weight: about 130g
Fan speed: 1200 ± 10% RPM
Maximum air volume: 50CFM
Maximum static pressure: 1.703mm-H20
Noise: 23.5DB (A)
Rated voltage: 12VDC
Working voltage: 10.8-13.2VDC
Starting voltage: 7VDC
Rated current: 0.25A
Power input: 3W
Bearing type: sleeve bearing
4. Water Tank
Size: Approx. 12 * 5.8 * 5.8 cm/ 4.7 * 2.3 * 2.3 in
Material: PMMA + anode aluminum
Intermediate transparent acrylic outer diameter: 50mm
Hole position: G1/4 thread *6
Equipped with adjustable plastic clips*1
1 * Water Row
1 * Water Pump
2 * Fan
1 * Water Tank (Equipped with adjustable plastic buckle * 1)
6 * Fast Twist
7 * Screw Kit
1 * Water Flow Meter
3 * Hard Tube
2 * Water Row Stent
5 * Choke Plug
2 * I-Type Holder
2 * 90 ° Elbow
2 * 90 ° Stents
2 * Connector
Corsair Hydro X Series, XD5 RGB Pump/Reservoir Combo, RGB Lighting
- A high-performance xylem D5 PWM pump controlled via PWM TO deliver the perfect flow balance for your loop.
- Ten top-mounted RGB LEDs light up your reservoir with stunning customizable RGB lighting when combined with a Corsair lighting Node PRO or Commander Pro.
- The integrated 330Ml Reservoir puts your custom cooling system’s coolant on display, with stunning angular design and an integrated fillport that makes filling, flushing and topping-off coolant easy.
- Included temperature sensor provides real-time coolant temperatures from inside your cooling loop.
- Rubberized mounting system reduces pump vibrations and noise, so your custom cooling loop is seen, Not Heard.
The Corsair Hydro x series XD5 RGB pump/reservoir Combo is ready to drive the world’s most demanding custom cooling systems. A xylem D5 PWM pump provides powerful flow rate for multi-block loops and is adjustable via PWM to maximize cooling capacity or minimize noise. Ten built in RGB LEDs, controlled adding a Corsair lighting Node Pro or Commander Pro and powerful Corsair iCUE software, provide a vibrant splash of control to customize your lighting, while an included temperature sensor gives you real-time performance data from inside your system, for accurate cooling adjustment. Universally compatible with G1/4 fittings and with both 120mm and 140mm fan mounting brackets included, The XD5 RGB pump/reservoir is the heart of your custom cooling system. Tech Support # 1-888-222-4346 opt #1
Similar items with 4 stars and above
Monsoon MMRS Custom Reservoir w/ D5 Pump Mount – 203.2mm length (8 in.) – Black Chrome
The MONSOON reservoir system is one of the sharpest looking reservoirs for any build on the market today. All the components are made of top quality materials engineered to have an excellent fit and finish. The ‘Reactor Core’ style tube is made from a partially frosted acrylic designed to create a superb design for the reservoir itself, while allowing the quality of the coolant inside to display brilliantly through the clear areas.
The reservoir system contains a total of 6 standard sized G1/4 ports to handle one or multiple loops and even install one of our CCFL Cathode Lights (Sold separately) in one of the unused ports. Precision machined from aluminum, the included 12mm tall reservoir mounts (“Grasshopper”) allow you to mount your reservoir perpendicular, 60 degrees left, or 60 degrees right. It features a pair of color matched load spreader bars to help minimize point loading on your case panel. The end caps are molded from heavy duty nylon with a black satin finish and allow you to mount a D5 pump (Sold separately) on one end. The D5 housing cap, made from machined aluminum, gives your D5 pump an elegant and suitable housing. This reservoir is approx. 78mm wide.
Reservoir system does NOT INCLUDE the following:
tube compression fittings, CCFL Cathode light and inverter, D5 Pump.
Thermaltake Pacific DIY LCS RL120 Water Cooling Kit CL-W069-CA00BL-A
When looking for a complete DIY liquid cooling solution, the Thermaltake Pacific RL120 DIY Water Cooling Kit is now here. As a all-in-one Liquid cooling combo kit, Thermaltake provides everything needed to add exceptional performance to your CPU with a DIY style all together. Gain freedom to display and secure your cooling components in endless configurations for a one of a kind presentation. Take your cooling to the next level with the Thermaltake Pacific RL120 DIY Water Cooling Kit.
Corsair Hydro X Series XR5 360mm Water Cooling Radiator
- Dual 120mm fan mounts on either side of the radiator are ready for your most ambitious custom Liquid Cooling build.
- 30mm radiator thickness delivers extreme cooling performance with high-airflow and low-noise fans.
- A premium COPPER radiator core and 25 micron thick cooling fins provide a high thermal transfer rate optimized for CORSAIR’s performance copper water blocks.
- High-quality matte Black polyurethane coating delivers a flawless finish to match your system.
- Integrated fan screw guides make it easy to install fans even when the radiator is fitted into a case.
The Corsair Hydro x series XR5 360mm water cooling radiator delivers extreme custom liquid cooling performance, with 30mm radiator thickness and 25 micron thin cooling fins maximizing heat dissipation surface area. A premium COPPER radiator core core is optimized for use alongside copper CPU and GPU water blocks, further increasing the thermal transfer rate. Intuitive extras such as integrated fan screw guides and built-in screw protection plates make it easy to install fans, without worrying about damaging the radiator. Equipped with standard G1/4″ Threads for universal compatibility and the surface area to tame even the highest-end hardware, The XR5 360mm radiator stands ready to cool even the most ambitious custom cooling loops and defeat the heat. Tech Support # 1-888-222-4346 opt #1
Similar items with 4 stars and above
PrimoChill Rigid Tubing 45/90/180 Degree Water Cooling Bending Kit – 1/2 in. OD
Now making custom bends with rigid tubing could not be easier. With the PrimoChill Rigid Tubing 45/90/180 Degree Bending Kit – 1/2 in. OD you can make consistent bends every time! Once your tube is heated (PETG or Acrylic) you can mold the tube using this bending tool for angles of any size. These tool has mount holes that allow you to mount to a hard surface for a more permanent work station.
WarningsPractice using the bending tool on some scrap rigid until you get the hang of how best to use it!
PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.
By our suggestions above, we hope that you can found custom water cooling pc for you.Please don’t forget to share your experience by comment in this post. Thank you!
Best custom water cooling pc: Top-Rated Brands & What to Buy