activeitup 
Nowadays, there are so many products of amplifier cooling fan car audio in the market and you are wondering to choose a best one. You have searched for amplifier cooling fan car audio in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings amplifier cooling fan car audio which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Receiver or Amplifier Cooling Fans with thermoswitch & Multi-Speed Fan Control
- These two high-quality, super low noise 80mm fan units are designed sit on your component’s top air vents. Each fan has a special raised air-chamber base, which covers nearly twice the area of a standard fan. A vortex of air is pulled out of the top of your component over the full area of these raised bases.
- The cooling system includes a thermoswitch module, which turns the fans on at approximately 82 degrees Fahrenheit. Just place the thermoswitch heat collector over a warm spot on top of your component’s air vents, and it will do the rest.
- You control the speed of the fans, with the multi-speed power controller. Even at medium speeds settings, the fans will replace a volume of air equal to that of most components several times per minute.
- Recommended fan speeds for this system: The two fans (running together) are rated at 13db while moving 31 cubic feet of air per minute at 1/2 speed, or 16db & 41CFM at 2/3 speed. With component cooling, slow (and quiet) are the way to go! Other available speeds: 1/4 speed = 10db/16CFM, 3/4 speed = 19db/46CFM, full speed = 22db/62CFM.
- Each fan unit is 4-3/4″ square, 1-1/2″ tall (including the top grill and air-chamber base), and only requires 3/8″ of space above the fans for air flow.
OVERVIEW:
This cooling system has two high-quality, low-noise 80mm fans, with long-lasting and quiet Fluid Dynamic bearings.
It includes a thermoswitch module, which turns the fans on at approximately 82F. The thermal sensor’s air-collection cup gathers hot air as it rises, to get an accurate measurement of the temperatures inside your component.
Each fan unit has a specially-constructed raised air-chamber base that enlarges the area of air flow, while also sealing air and preventing vibrations. The air-chamber base covers twice the area of a standard fan.
The system has a multi-speed power transformer, which plugs into an AC outlet. You control the speed of the fan, using this transformer, which can be set to any one of 5 different speeds.
THE COOLING SYSTEM INCLUDES: 1 x dual-80mm (two fans) component fan unit, 1 x thermoswitch module, 1 x multi-speed power transformer, and printed installation instructions. All cooling system parts connect together using special heavy-duty Molex quick-connect plugs, which allows the parts to be separated for easy wire-routing.
SETUP: The system comes completely assembled, with all components installed, wired and ready to go! Just plug the power transformer into an AC outlet, and drop the fans and sensor on top of your receiver’s top air vents.
GUARANTEE: Your satisfaction is guaranteed. You can return the system for any reason within 30 days — just contact me (through Amazon) and I will send you a prepaid shipping label. Since starting in 2005, AV Cabinet Cooling has sold over 10,000 cooling systems, and we are dedicated to great customer service.
WARRANTY: Your purchase is also covered by a 12 month parts & labor warranty.
Xscorpion TF8 8-Inch Cross Flow 12-Volt Cooling Fan with Mounting Tabs
- 8-inch Cross Flow Cooling Fan
- Compatible with all 12-volt systems
- Comes equipped with mounting tabs for simple installation
- Low profile cross flow design provides generous air flow
- Lightweight and compact design allows installation in tight fitting spaces
8-Inch Cross Flow 12-Volt Cooling Fan with Mounting Tabs
Stinger SGJ78 8.25-Inch Cross-Flow Fan
8-1/4″ Cross flow cooling fan
Pair Packed 3 Inch 12VDC 12 Volt Car Truck Cooling Fans
uxcell DC 12V 0.2A Cross Flow Cooling Fan Heat Exchanger Amplifier Cool Turbo
Receiver or Amplifier Megabase 12 Volt Trigger-Controlled Cooling Fans (12v), with multispeed Control, for Home Theater
- This super low-noise dual-120mm fan unit is designed to sit on your receiver’s top air vents. It has a special raised air-chamber base, which covers 145 square inches, and air is drawn out over the entire area of this raised base.
- The system includes a 12 volt trigger control module, which turns the fan on and off, under the control of your component’s 12v trigger socket. The 12v module controls the power from the cooling system’s multi-speed transformer, directing it to the fans when it detects a 12v signal. In addition, you control the speed of the fans, with the multi-speed power controller.
- IMPORTANT: Some receivers have a non-standard setup, where the receiver doesn’t directly control the trigger (for example, the trigger might be under the control of Zones 2 or 3, etc.). Please consult your receiver’s manual for details about how its 12v trigger operates, or contact me if you have questions.
- Recommended fan speeds for this system: The fans (running together) are rated at 13db while moving 50 cubic feet of air per minute at 1/3 speed, or 16db & 72CFM at 1/2 speed. With component cooling, slow (and quiet) are the way to go! Other available speeds: 2/3 speed = 19db/98CFM, 3/4 speed = 22db/110CFM, full speed = 25db/148CFM.
- The Megabase cooling unit measures 14.5″ wide, and 10″ deep. It is 1-1/2″ tall, and only requires about 1/4 inch of additional space above for airflow.
OVERVIEW: This cooling system has two high-quality, low-noise 120mm fans, with long-lasting and quiet fluid dynamic bearings.
It includes a 12 volt trigger control module, which turns the fan on and off, under the control of your receiver’s 12v trigger socket. The module detects the 12v signal, then sends the power from the cooling sysem’s transformer to the fans.
The fan unit has a specially-constructed raised air-chamber base that enlarges the area of airflow, while also sealing air and preventing vibrations. This base covers over 145 square inches. Please make sure that the top of your component has a flat area on top that is at least 14.5″ x 10″. Don’t worry if your air vents are smaller (or larger) than the air-chamber base — it will work with any size vents.
THE COOLING SYSTEM INCLUDES: 1 x dual-120mm (2 fans) Megabase fan unit, 1 x 12v trigger control module, 1 x 5 speed power transformer, and printed installation instructions. All cooling system parts connect together using special heavy-duty Molex quick-connect plugs, which allows the parts to be separated for easy wire-routing.
SETUP: The system comes completely assembled, with all components installed, wired and ready to go! Just plug the power transformer into an AC outlet, and drop the fan unit on top of your receiver’s top air vents.
GUARANTEE: Your satisfaction is guaranteed. You can return the system for any reason within 30 days — just contact me (through Amazon) and I will send you a prepaid return shipping label. Since starting in 2005, AV Cabinet Cooling has sold over 10,000 cooling systems, and we are dedicated to great customer service.
WARRANTY: Your purchase is also covered by a 12 month parts & labor warranty.
AC Infinity AIRCOM S7, Quiet Cooling Fan System 12" Top-Exhaust for Receivers, Amps, DVR, AV Cabinet Components
- A quiet fan system designed for cooling routers, modems, game consoles, and other AV components.
- Protects components from overheating, performance issues, and shortened lifespans.
- Programming features two thermal trigger modes and four speed control options.
- Contains two dual-ball bearing fans with PWM-controlled motors to minimize noise.
- Dimensions: 11.6 x 6.3 x 1.5 in. | Exhaust: Top | Airflow: 140 CFM | Noise: 19 dBA
AC Infinity MULTIFAN S7-P, Quiet Dual 120mm AC-Powered Fan with Speed Control, for Receiver DVR Playstation Xbox Component Cooling
- Ultra-quiet AC-powered fan designed to cool various electronics and components.
- Features a multi-speed controller to set the fan’s speed to optimal noise and airflow levels.
- Dual-ball bearings have a lifespan of 67,000 hours and allows the fans to be laid flat or stand upright.
- Turbo power adapter increases maximum fan speed and enables the fan to be powered through an AC outlet.
- Dimensions: 4.7 x 4.7 x 1 in. per fan | Total Airflow: 130 CFM | Total Noise: 19 dBA | Bearings: Dual Ball
Hi-Tech 8” Cross Flow Car Stereo Amplifier Component Cooling Fan Quiet Computer
AMP computer TV electronics components Quiet
Conclusion
By our suggestions above, we hope that you can found amplifier cooling fan car audio for you.Please don’t forget to share your experience by comment in this post. Thank you!
