Which Is The Best Glycol Cooling System

3-in-1 Refractometer, tri-scale design uses for testing freezing point & concentration of either ethylene or propylene glycol-based cooling systems & testing ethylene or propylene glycol-based anti-freezing liquids. Can also measure specific gravity of battery fluid.

Application: 

• Monitor reliability of your battery charge & health condition
• Check freezing point of your car cooling system
• Be aware of the status of your car coolant
• Ensure all is working properly and not causing problems like rust, prone to freezing, poor charging, poor cooling, etc

Features:

• Auto Temperature Compensation (ATC), rest easy that your measurements are always accurate regardless of temperature variation
• Cushioned with soft and comfortable non-slip rubberized grip, insulate test solution from body heat
• Adjustable focus, clearly defined scale, large easy-to-read measurement
• Approved by strict quality & safety standards
• Accurate results guaranteed

Specifications

• Measuring Range:
  • Ethylene Glycol :  -60~0°C (66.6%-0%)
  • Propylene Glycol :  -50~0°C (62.4%~0%)
  • Battery Fluids SG : 1.100 – 1.400kg/l 
• Division:
  • Ethylene Glycol  : 5°C
  • Propylene Glycol : 5°C
  • Battery Fluids SG : 0.01kg/l 
• Accuracy:
  • Ethylene Glycol  : ±5°C
  • Propylene Glycol : ±5°C
  • Battery Fluids SG : ±0.01kg/l
• ATC: 10-30°C
• Weight : 91g
• Length :152mm (6.0  inc

Set Includes

• 1 x 3-in-1 Automotive Refractometer
• 1 x English Instruction manual
• 1 x Mini screwdriver
• 2 x Pipettes
• 1 x Cleaning Cloth
• 1 x Protective Carrying Case

FREE SHIPPING UPS TO 48 STATES – Chiller Daddy is a high output, heavy duty under sink drinking water chiller for home or office. Great for use with a Reverse Osmosis RO System or under sink drinking water filter system. Easy to install. Whisper quiet 3-way noise suppression system. SUS304 Stainless Steel inside and out. Even the nuts, bolts, screws, washers, cabinet and drain cap are stainless steel. Premium quality in every detail. Chiller Daddy makes perfectly chilled water for big thirsts. Adjustable Water Thermostat 42F – 54F – Factory Preset For Normal Use – Perfectly Refreshing Drinking Water Temperature Range Hygenic Stainless Steel Cold Water Tank, Drain Cap & In/Out Tubes – 100% Stainless Steel Waterway males it the best choice for the high purity of reverse osmosis water Attractive Appliance Grade 304 Stainless Steel “NO-RUST” Exterior Cabinet Long Life, Hermetically Sealed, High Efficiency Compressor Auto Overload Protection – Thermally Protected Motor-Compressor Fast 1.32 GPH Flow Rate – Quick Recovery Dual Evaporator Grid For Silent and Efficient Convection Water Chilling. Conforms to UL Standard 399. Certified to CSA Standard C22.2 #s 60335-2-24 & 60335-1Easy to Install on RO Reverse Osmosis and Filtered Drinking Water Systems. Enough cold water to give you brain freeze on a hot day!

Continental Elite Molded Radiator Hoses are designed to transfer glycol-based coolants to and from the radiator as well as through other components in the vehicle’s coolant system. Molded to provide full flow through tight bends, ease of application, and to relieve stress on radiator connections. Original configurations available to ensure proper fit. Features EPDM tube and cover with synthetic knit reinforcement, and is compatible with most coolants including ethylene glycol- and propylene glycol-based coolants, as well as organic acid modified, long-life coolants. Meets or exceeds SAE 20R4EC Class D1 specifications as well as many OE specifications. Resistant to Electrochemical Degradation (ECR). ID range: 1-inches to 3-inches and includes intersect hose configurations. Temperature range: -40F to 275F (-40C to 135C). Not for use in fuel or oil transfer applications.

Evans Cooling System Flush is a cooling system cleaner that helps remove rust, scale buildup, and deposits with the use of its cleaning agents. Specifically formulated to clean the cooling system of high mileage or older vehicles, such as vintage, classic, or antique. Evans Cooling System Flush comes in a half-gallon bottle design and should be used in preparation for the installation of Evans Waterless Coolant. Corrosion and partial build up need to be flushed before any remaining water can be removed with Evans Prep Fluid. This two-step process prepares the cooling system for any Evans Waterless Coolant products. Evans Cooling System Flush is not intended to be a stand-alone operating coolant, but as a flush only. Evans Cooling System Flush contains less than 10% ethylene glycol. Evans is proudly made in the USA.

Zerex Super Cleaner has a heavy-duty patented formula that removes radiator solder bloom, rust, scale and corrosion deposits that flushes cannot. It is safe for all cooling system metals including aluminum.

COOLING FLUID LOW TEMPERATURE -32 degrees F. Designed for use in Plasma, MIG, TIG and resistance welding systems. Available in a ready-to-use format, CANTESCO COOLING FLUID is a water and ethylene glycol based formulation which is designed to cool and protect equipment.

Continental Elite Molded Radiator Hoses are designed to transfer glycol-based coolants to and from the heater core, by-pass to the radiator, as well as through other components in the vehicle’s coolant system. Original configurations available to ensure proper fit. Features EPDM tube and cover with synthetic knit reinforcement, and is compatible with most coolants including ethylene glycol- and propylene glycol-based coolants, as well as organic acid modified, long-life coolants. Meets or exceeds SAE 20R3EC Class D1 and Class D2 specifications as well as many original equipment specifications. Resistant to Electrochemical Degradation (ECR). ID Range: 1/4-inches to 1-3/8-inches and includes intersect hose configurations. Temperature range: -40F to 275F (-40C to 135C). Not for use in fuel or oil transfer applications.

Continental Elite Molded Radiator Hoses are designed to transfer glycol-based coolants to and from the radiator as well as through other components in the vehicle’s coolant system. Molded to provide full flow through tight bends, ease of application, and to relieve stress on radiator connections. Original configurations available to ensure proper fit. Features EPDM tube and cover with synthetic knit reinforcement, and is compatible with most coolants including ethylene glycol- and propylene glycol-based coolants, as well as organic acid modified, long-life coolants. Meets or exceeds SAE 20R4EC Class D1 specifications as well as many OE specifications. Resistant to Electrochemical Degradation (ECR). ID range: 1-inches to 3-inches and includes intersect hose configurations. Temperature range: -40F to 275F (-40C to 135C). Not for use in fuel or oil transfer applications.

Continental Elite Molded Radiator Hoses are designed to transfer glycol-based coolants to and from the radiator as well as through other components in the vehicle’s coolant system. Molded to provide full flow through tight bends, ease of application, and to relieve stress on radiator connections. Original configurations available to ensure proper fit. Features EPDM tube and cover with synthetic knit reinforcement, and is compatible with most coolants including ethylene glycol- and propylene glycol-based coolants, as well as organic acid modified, long-life coolants. Meets or exceeds SAE 20R4EC Class D1 specifications as well as many OE specifications. Resistant to Electrochemical Degradation (ECR). ID range: 1-inches to 3-inches and includes intersect hose configurations. Temperature range: -40F to 275F (-40C to 135C). Not for use in fuel or oil transfer applications.

Conclusion

By our suggestions above, we hope that you can found glycol cooling system for you.Please don’t forget to share your experience by comment in this post. Thank you!