activeitup Nowadays, there are so many products of 1 4 shut off valve in the market and you are wondering to choose a best one.You have searched for 1 4 shut off valve in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 1 4 shut off valve which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
576 reviews analysed
(4-Pack) BrassCraft G2CR19L1X 1/2-in Nominal Comp x 3/8-in OD Outlet Chrome Plated Brass 1/4-Turn Angle Stop Valve Less Outlet Sleeve/Nut (4-Pack)
- Angle Stop Valve: Shut-off Valve
- 1-Piece Body Construction
- 1/4-Turn ON/OFF
- Inlet: 1/2″ Copper Pipe (1/2″ Nominal Compression)
- Outlet: 3/8″ OD Compression (NO Nut/Sleeve)
- Lead Free: Compliant with Low-Lead Legislation Act S3874 & AB1953
- Exactly Same As G2CR19XC1 Less Nut/Sleeve on Outlet
- Professional Value Buy: Pack of 4
This genuine BrassCraft angle stop valve has 1/2-inch nominal (5/8″ OD) inlet x 3/8-inch OD outlet and is chrome-plated lead free brass. For use in potable water distribution systems. Not intended for recirculating water systems that produce continuous temperatures above 115-degree F. Each pack includes 4 valves.
Valterra 7101 ABS Gate Valve, Black, 1-1/2" Slip
- APPLICATIONS: Ideal for low pressure and vacuum applications as a quick shut-off for liquids.
- KEY FEATURES: Unrestricted flow – Full port opening – Simple push/pull operation
- SPECIFICATIONS: Maximum Pressure – 30 psi Open/45 psi Closed, Schedule 40 ABS Slip fittings
- REPAIRS: Replaceable body, seals and handle
This type of slide gate valve was originally designed for draining tanks and controlling shallow bodies of water like ponds and lagoons. They can also be used as shut off valves in low pressure or vacuum air lines. Please note that each valve size has an open and closed pressure rating. Because the plastic paddle can flex with flowing water they are not good for throttling water or trying to close the valve with fast moving water – thus the low mid flow cut off water pressure of approximately 6 pounds per square inch (psi). These slide valves are sometimes referred to as “knife or guillotine” gate valves and are a great alternative to ball valves in low pressure applications since they are full flow, quick opening, and are generally a much lower cost especially in larger sizes. They work well with soft debris like waste but small hard debris can settle in the bottom of the valve seat/slot and prevent it from closing completely. They can easily be cleaned or repaired by unbolting and replacing the seals or valve body. The handles simply unscrew for easy replacement – if you do so be sure not to damage the valve shaft. Extension rods are available for remote actuation. The Valterra 7101 gate valve has 1-1/2″ Schedule 40 female slip fittings which receive 1-1/2″ pipe. Black acrylonitrile butadiene styrene (ABS) body and hub fittings are resistant to corrosion and mild chemicals as are the polypropolene (PP) paddle and thermoplastic vulcanizate (TPV) seals. The valve shaft is made of 304 stainless steel. Hardware is zinc plated steel. It has a maximum pressure rating of 45 psi in the closed position, 30 psi in the open position, and a mid-flow maximum closing pressure rating of 6 psi. The maximum temperature rating is 205 degrees F (96 degrees C). See Gate Valve Measurement chart for dimensions and Head Pressure chart for determining the pressure based on the height of water being held back.
SharkBite 22222-0000LFA Ball Valve 1/2 Inch x 1/2 Inch, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT
- INSTALLS IN SECONDS: 1/2 inch ball water valve requires no special tools, no soldering, no crimping or glue. Push to connect design provides an efficient application that saves time and money. Just push to create a watertight seal
- VERSATILE: Shark Bite Ball Valve plumbing fittings fit Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
- LEAD FREE: Made of high quality forged lead free DZR brass.
- QUALITY: Only Shark Bite’s quality and performance is field-proven with more than 550 million connections. Shark Bite is the only push-to-connect brand than can ensure a clean, leak-free connection
- PERFORMANCE: 200 PSI and 200 degrees F. Use in potable water and hydronic heating applications.
Product Description
SharkBite 1/2″ Ball ValveSharkBite uses high-quality brass for our 1/2″ x 1/2″ brass push-to-connect ball valve with a single ball valve handle. The full port ball valve allows water to pass through the valve easily and freely, with the reliable option to turn off the water supply fast! Quick and easy to install a new valve or to fix a leaking water pipe. Our ball valves can be easily rotated after installation making it a cinch to shut off water in an emergency or work in tight spaces.Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no-fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.CUT. PUSH. DONE. The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless-steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue.
From the Manufacturer
SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.
SharkBite 22185-0000LFA Ball Valve 3/4 Inch x 3/4 Inch, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT, brass
- INSTALLS IN SECONDS: 3/4 inch ball water valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal
- PERFORMANCE: 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating Applications.
- COPPER, PEX, CPVC, PE-RT: SharkBite Ball Valve plumbing fittings fit Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection
- RESIDENTIAL and COMMERCIAL: All SharkBite PEX pipe tubing meets the same standards for commercial and residential plumbing applications
Product Description
Cash Acme 22185-0000LF 3/4″ SharkBite Lead Free Ball Valve Cash Acme 22185-0000LF 3/4″ SharkBite Lead Free Ball Valve Features:;Ball valve;Highly forged brass;Single lever control;Push fitting;Lead free;3/4″;CA/VT Compliant
From the Manufacturer
SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.
Pexflow 615P012-2 Full Port x PEX Barb Ball Valve Water Shut Off With Tee Handle 1/2" Brass (Pack of 2}
- High quality: constructed of lead free (dzr) Brass for superior reliability and strength
- Easy to use: fittings work with crimp ring or clamp connection methods
- Heavy duty: forged Brass valve pressure is rated 150 psi wsp for steam and 600 psi woc for water, oil and gas
- Style: full port chrome plated Brass ball with pex size 1/2 inch connections on both ends
- Nsf, upc and csa approved, manufactured to astm standard F1807
Midwest Control MBB-75 600 PSI CWP 3/4" MPT x FPT Brass Ball Valve
PureSec 2018 MFS1 Mini White Plastic Quick Fitting Adjustable PVC Float Shut Off Valve for tubing OD 1/4" or 3/8" Used for RO System Refrigerator ice Maker Coffee Machine
- 100% BPA free, 100% leak free, 100% Re-useable
- Fits tubing OD 1/4″or 3/8″ on most RO system,Requires 1/2″ mounting hole
- Connect and disconnect quick and easy without any other tools
- Suitable for use in hot and cold water applications
- Applications include RO system beverage dispensing refrigerator ice maker coffee machine etc
What is it?
PureSec 2018 MFS1 mini white plastic Quick fitting adjustable PVC Float Shut Off Valve is made of 100% BPA Free thermoplastic material (Polypropylene), which is suitable for use in hot(140°F Max) and cold (33°F Min.)water applications. It adopts Push-Fit technology, which allows users to connect and disconnect quick and easy without the need of any other tools. Float valves are used to shut down your reverse osmosis system when the float is elevated,It automatically start and stop water flow.The float is adjustable to allow you to control the water height.It fits standard O.D. 1/4 inch or 3/8″ inch Copper, CPVC, PEX and PVC tubing for most RO systems
Where to use it ?
Applications include RO system, beverage dispensing, refrigerator ice maker, coffee machine,aquaponic fish tank etc.Float valves are simple to install and can save a lot of water from ending up on the floor. They can be installed in containers as small 1 gallon pails, sumps, and 200 plus gallon commercial storage containers to shut off the flow of water. Even if you do not have a large storage container a simple 5 gallon bucket with a float valve installed in it will help save money from having water end up on the floor or best case scenario just going down the drain. Also you can convert any coffee or espresso machine to automatic refill
How to use it ?
Installation is as easy as drilling a small hole in the container, sliding the float in and attaching using the included nut. and then pop in your 1/4″ tubing into 90 degree 1/4 tube fitting , pushing until it won’t go in. To remove, just push in the outer circle on either end and pull right out. You need to make sure the tubing is cut squared to insure no leaks.
PureSec 2018 MFS1 mini white plastic Quick fitting adjustable PVC Float Shut Off Valve is quality, reliability, and economy in potable water service.
PureSec 2018 MFS2 Mini White Plastic Quick Fitting Adjustable PVC Float Shut Off Valve for tubing OD 1/4" or 3/8" Used for RO System Refrigerator ice Maker Coffee Machine
- 100% BPA free, 100% leak free, 100% Re-useable
- Fits tubing OD 1/4″or 3/8″ on most RO system,Requires 1/2″ mounting hole
- Connect and disconnect quick and easy without any other tools
- Suitable for use in hot and cold water applications
- Applications include RO system beverage dispensing refrigerator ice maker coffee machine etc
What is it?
PureSec 2018 MFS2 mini white plastic Quick fitting adjustable PVC Float Shut Off Valve is made of 100% BPA Free thermoplastic material (Polypropylene), which is suitable for use in hot(140°F Max) and cold (33°F Min.)water applications. It adopts Push-Fit technology, which allows users to connect and disconnect quick and easy without the need of any other tools. Float valves are used to shut down your reverse osmosis system when the float is elevated,It automatically start and stop water flow.The float is adjustable to allow you to control the water height.It fits standard OD 1/4 inch or 3/8″ inch Copper, CPVC, PEX and PVC tubing for most RO systems
Where to use it ?
Applications include RO system, beverage dispensing, refrigerator ice maker, coffee machine,aquaponic fish tank etc.Float valves are simple to install and can save a lot of water from ending up on the floor. They can be installed in containers as small 1 gallon pails, sumps, and 200 plus gallon commercial storage containers to shut off the flow of water. Even if you do not have a large storage container a simple 5 gallon bucket with a float valve installed in it will help save money from having water end up on the floor or best case scenario just going down the drain. Also you can convert any coffee or espresso machine to automatic refill
How to use it ?
Installation is as easy as drilling a small hole in the container, sliding the float in and attaching using the included nut. and then pop in your 1/4″ tubing into 90 degree 1/4 tube fitting , pushing until it won’t go in. To remove, just push in the outer circle on either end and pull right out. You need to make sure the tubing is cut squared to insure no leaks.
PureSec 2018 MFS2 mini white plastic Quick fitting adjustable PVC Float Shut Off Valve is quality, reliability, and economy in potable water service.
Pushlock UPSSP1212-2 1/4 Turn Straight Stop Valve Water Shut Off 1/2 x 1/2 Inch Push, 1/2" Push X 1/2" Push Chrome
- LEAD FREE : Brass Fittings Size 1/2 Inch push x 1/2 Inch push and 1/4 Turn on/off
- QUICK INSTALLATION : No special tools, No soldering, No crimping or glue. Push to connect design provides an efficient application that saves time and money.
- VERSATILITY: Pushlock plumbing fittings fit Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination- even on wet lines!
- PERFORMANCE: 200 PSI and 200 degrees F. Use in potable water and hydronic heating applications.
- RESIDENTIAL & COMMERCIAL: All Pushlock fittings meet the same standards for commercial and residential plumbing applications
Pushlock Valves are easily installed and yet easy to disconnect and reuse. It features easy, Quick push-fit connection of nominal hard copper tube size (CTS), CPVC, or PEX with single lever heavy duty rust resistant handle with vinyl grip. This valves are certified for potable water and hydronic applications. When using these valves there is no need to buy expensive tools, torches, solder, flux or glue and primer. These valves can easily be removed by using a demount clip or disconnect tong. Approved for use underground and behind walls without the need of access panels. Made with Lead Free DZR Forged Brass. They are ideal for service and repair – even on wet lines. Pre-Lubricated for quick installation and No Tools, No Heat, No Glue, No Flux and No Solder Required, EPDM O-Ring for leak free seals.
2-Pack in-Line Barbed Ball Valve 13mm for 1/2 Inch Tubing .520 ID – Regulate and Shut-Off/On Water Flow
- ▶ IMPORTANT ◀ BE SURE TO CHECK THE SIZES and BUY the RIGHT VALVE. THIS 13MM BALL VALVE WORKS WITH 1/2″ TUBING WITH 0.520 INSIDE DIAMETER. (If you would like to use these with 1/2″ DRIP IRRIGATION TUBING which has a larger inside diameter .570 to .620, then select the 16mm size valve).
- COMPLETE FLOW CONTROL. 1/2-inch inline ball valves (2 Pack) are the perfect way to regulate the water flow of your aquarium, aquatic or hydroponic systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow.
- FULLY ADJUSTABLE. Adjust the flow anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won’t stick like PVC ball valves.
- VERSATILE. Customize a secondary water zone, create individual dripline control, use as tank valves, drain valves, return valves or in any situation where fluid restriction is needed. For use with aquarium plumbing, pump return line, canister filter, protein skimmer, calcium reactor, phosban reactor, saltwater applications, RV camper and trailers, pex tubing, hydroponics, aquaponics, etc.
- LEAK-FREE SEAL. These non-corrosive plastic flow valve fittings are guaranteed to provided a secure, watertight connection that handles an operating pressure of up to 45 PSI. Constructed to be heat, chemical and wear-resistant assure long term reliability of connections. Confidently install these barbed fittings without clamps by using our Valve Sizing Chart (see photo) to get the perfect fit. Match the ID (Inner Diameter) of your hose or tube with the acceptable IDs listed on the chart.
IMPORTANT: THIS 13MM SIZE VALVE IS **NOT** FOR 1/2″ DRIP IRRIGATION TUBING. FOR 1/2 INCH DRIP IRRIGATION SYSYEMS, BUY OUR 16MM SIZE VALVE.
Product Features:
Simple on-off operation and straight through flow
Operating pressure range 0 to 45 PSI at a temperature to 100°F
Rapid quarter turn on-off operation
Single barb inlet and outlet
For low pressure applications
Things to consider when installing valves in your system include:
Selecting the correct barb size to match your tubing (see sizing chart)
Ensure tubes are connected to both the inlet and the outlet of each valve
Winterize your system if exposed to freezing conditions
Limit your system pressure to a maximum of 300 kPa to ensure all devices and emitters function correctly
Conclusion
By our suggestions above, we hope that you can found 1 4 Shut Off Valve for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy 1 4 Shut Off Valve, eg:
- What are Top 10 1 4 Shut Off Valve for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 1 4 Shut Off Valve to buy?
- What are Top Rated 1 4 Shut Off Valve to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 1 4 Shut Off Valve?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 1 4 Shut Off Valve.
- Before deciding to buy any 1 4 Shut Off Valve, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose 1 4 Shut Off Valve and What you should consider when buying the 1 4 Shut Off Valve and Where to Buy or Purchase the 1 4 Shut Off Valve. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 1 4 Shut Off Valve of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 1 4 Shut Off Valve.
