activeitup 
Nowadays, there are so many products of ninja blender parts 4 blade in the market and you are wondering to choose a best one. You have searched for ninja blender parts 4 blade in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ninja blender parts 4 blade which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
35,694 Reviews Scanned
6 Fins Blender Blade 4inch Diameter Female Blade for Nutri Ninja iQ 900W BL454-70 BL455-70 and 1000W BL480-70 BL480W-70 BL481-70 BL482-70 BL483-70 Blender Replacement Parts
- PLEASE CHECK – Please check your existing blade for the following 1) Count the FINS IT SHOULD BE 6-FINS. 2) The blade has MALE FINS 3) 3.94″ (10cm) Diameter.
- PLEASE CHECK your blade and compare it with our pics before order, This blade have the Female tip, Please compare with your original one first
- Packing include: 1x 6Fins Bottom Blade Assembly, 2 x Replacement Gasket Rubber (One Gasket Rubber already in the blade )
- Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket. Be careful of the blade when open the package.
- Made of Food Grade BPA Free Plastic and Stainless Steel, Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture. Dishwasher Safe.
Blender Blade Replacement Parts for Ninja 16 oz Blender Cup, 6 Fins Blender Extractor Blade Replacement,4 Blade Assembly For Nutri Ninja Bl770, Bl771, Bl773co,Bl780, Bl660, Bl740
- 【PREFECT FIT】: Blender Blade Assembly for Nutri Ninja BL770, BL771, BL773CO, BL780, BL660, BL740, only fits for 16 oz Cup, 6 Fins, 3.35 inches / 8.5 cm
- 【GOOD REPLACEMENT】: Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture. Dishwasher Safe.
- 【PREMINUM QUALITY】: Made of food grade PP and stainless steel
- The replacement blade has been well-tested by the manufacturer.
- 【PAY ATTENTION】: This blade is Only fit for Ninja 16oz Cup. (Not fit 18oz, 24oz, 32oz)
- 【100% SATISFACTION GUARANTEE】 Please kindly check your Ninja blender is 6 fins blender before purchase. With 3 months warranty: for any reason you’re not completely satisfied,can ask for a replacement or full refund.
Ninja Master Prep Pro 16oz Pitcher Bowl Two Piece 4 Blade Cutting Chopper – Master Prep Pro QB900 QB900W
Ninja Single Serve 16-Ounce Cup Set for BL770 BL780 BL660 Professional Blender (Pack of 2)
- Ninja Single Serve 16 ounce Cups. Include Two Replacement 16-Oz. Single Serve Cups and Two Sip Lids
- Ninja 16oz Cups with “FOUR TABS” Please make sure before buying that the cups you are replacing have “4 TABS”.
- These cups fit these model number blenders. (The model number is located underneath the base of the blender and must start with a BL) : BL660 (1100 watt), BL663 (1100 watt), BL740, BL770 BL771 BL772 (1500 watt), BL780 (1200 watt), BL810 BL820 BL830
- BPA Free Plastic Construction.
- Dishwasher Safe.
These Ninja single serve cups with convenient to-go lids are designed for use with the Ninja BL660 Professional Blender & Single Serve. Includes two replacement 16-oz. single serve cups and two lids. BPA-free plastic construction.
Replacement Parts for Nutri Ninja Blender Blade, 7 Fins Replacement Blade Parts Extractor Assembly for Nutri Ninja BL480 BL482-30 BL682 BL492 BL450 Models Blender
- ★Ninja Blade Compatibility：7 Fins Ninja Blade Apply to Nutri Ninja Pro BL450-30 BL456-30 BL451-30 BL454-30. Nutri Ninja Auto-iQ BL480-30 BL481-30 BL482-30 BL490-30. Nutri Ninja Auto-iQ Pro Completes BL487-30 BL488W-30 BL487A-30 BL486CO-30. NutriNinja Auto-iQ Compact System BL491-30 BL492-30 BL492W-30. (Please confirm your blender need 7 fins replacement blade before purchasing, other model is not compatible if don’t remark).
- ★Materials&Size:Made of food grade PP and stainless steel, 7 Fins, 4″/10CM diameter, Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture. Dishwasher Safe.
- ★Usage Note: The rubber gasket on the bottom blade may loose during transportation, so before using the bottom blade, check the rubber gasket and make sure it is tight against the bottom blade
- if you want to use this replacement gasket, remove the bottom blade In the pre-installed gasket.
- ★Range of Use: This stirrer has a unique “stacked blade” assembly consisting of several sharp blades mounted at different heights in the container.BPA Free,make your Juicer reuse again and perfect for all your blending and mixing needs.
- ★100% Satisfaction Guarantee – We’re so confident that you’ll love the Ninja Blender Replacement that we’ll refund every penny if you don’t like it! if you have any problem about it, refund or replace new one quickly, contact us any time for help.
Ninja Blender Replacement Blade Parts Nutri Ninja 7 Fins replacement bottom blade effortlessly pulverizes fruits,vegetables.
BEFORE PURCHASING please check your existing blade for the following
Product Specifications
★- Item Type: Replacement Parts for Nutri Ninja Blender Blade Assembly 7Fins
★- Blade Material: Stainless Steel
★- Blade Shape: Cross Blade
★- Color: Black
★- Diameter: 4″ (10cm) Diameter.
Compatibility
This 7 FINS Nutri Ninja Pro Extractor Blades Assembly Works with these models:
This 7 FINS Nutri Ninja Pro Extractor Blades Assembly Works with these models:
(1) Nutri Ninja Pro BL450-30/BL456-30/BL451-30/BL454-30
(2) Nutri Ninja Auto-iQ BL480-30/BL480D-30/BL481-30/BL482-30/BL490-30/BL681A-30/BL682-30/BL642W/BL682
(3) Nutri Ninja Auto-iQ Pro Complete BL487-30/BL488W-30/BL487A-30/BL486CO-30
(4) Nutri Ninja Auto-iQ Compact System BL491-30/BL492-30/BL492W-30
(Only fit for 18oz, 24oz, 32oz not fit for 16oz)
Tip: Please according to your Nutri Ninja Blender choose 6 fins or 7 fins Ninja Blender Blade.
Similar items with 4 stars and above
Ninja Blender Replacement Parts 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Blender Blade Assembly Fits 1000w Nutri Ninja Auto-iQ BL480-30 BL482-30 BL682 BL640
- ✅【ATTENTION】Ninja Replacement Blade — Compatible with BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012. **Please confirm your blender need 7 fins replacement blade before purchasing.
- ✅【 PREMIUM QUALITY】7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel. Packing include: 1x 7 Fins Bottom Blade Assembly, 2 x Replacement Gasket Rubber,one on the blade,the other is Spare Rubber(**Should you have any question about this item, feel free to contact us! )
- ✅【EASY TO INSTALL】 Just replace your bad blade and juicer can be reused. **The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.
- ✅【Note 1】 Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket【Note 2】Be careful of the blade when open the package. Any questions about the item, pls feel free to contact us. Dishwasher safe.
- ✅【MONEY-BACK GUARANTEE】:It’s non-original aftermarket part but exactly fit for Ninja Blender.With 3 months warranty
- for any reason you’re not completely satisfied, please feel free contact with us freely, we will try our best to serve you.
NOTE:
Two conditions must be met at the same time before purchase:
☞ Your original motor base must be 7 fins;
☞ Your blender model must identity with our stated model.
The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base:
There are too many models of ninja blender blade, if any character is difference, please don’t purchase it.
Pay attention to before use :
1. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it.
2. Please check the rubber gasket and be sure it is put snugly into the bottom blade.
(The rubber gasket is used to avoiding a leak)
3. Do not overfill! To avoid spilling, do not add ingredients past the Max fill line.
4. Place the replacement blade onto the cup and screw it tightly until you have a good seal.
5. Please make sure it in right place and locked tightly.
Do not run your blender over 4 minutes at a time to prevent overheating of the blender.
Description:
– Item Type: Ninja Blender Replacement Parts for blender
– Blade material: stainless steel
– Blade shape: Cross blade
– Color: Blade 7 Fins
＊ This Ninja Blender Accessories Suit for ＊
BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO,
BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W,
BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682,
NN100, NN100A, NN101, NN102, BL2012.
＊ Not fit for ＊
BL660,BL663,BL740,BL770,BL771,BL773CO,BL780,BL820,BL830,
BL450,BL451-70,BL454-70,BL482-70.
【Please check your model carefully before purchasing.】
Packing Including:
1 x Ninja blade Replacement
2 x Extra Gasket Rubber
Similar items with 4 stars and above
Esimen Replacement Blender Blade for Ninja BL770 BL770A BL771 BL772 BL780CO BL773CO BL740,16 oz Blender Cup, 6 Fins Blender Extractor Blade Replacement,4 Blade Assembly (3.35"diameter / 6 fin)
- ⭐ PREFECT FIT: Blender Blade Assembly for Nutri Ninja BL770, BL771, BL773CO, BL780, BL660, BL740, only fits for 16 oz Cup, 6 Fins, 3.35 inches / 8.5 cm
- ⭐ GOOD REPLACEMENT: Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture. Dishwasher Safe.
- ⭐ PREMINUM QUALITY】: Made of food grade PP and stainless steel
- The replacement blade has been well-tested by the manufacturer.brings qualified anti-corrosion performance.
- ⭐ PAY ATTENTION】: This blade is Only fit for Ninja 16oz Cup. (Not fit 18oz, 24oz, 32oz) Great replacement, easy to change, perfectly fit for your blender/juicer.
- ⭐ 100% SATISFACTION GUARANTEE】 Please kindly check your Ninja blender is 6 fins blender before purchase. With 3 months warranty: for any reason you’re not completely satisfied,can ask for a replacement or full refund.
Similar items with 4 stars and above
Blendin Replacement 4 Base Gears, 4 Blade Gears Clutch Parts, Fits Magic Bullet MB1001 Blender
Fits Magic Bullet MB1001 only. Replacement parts. 4 blade gears and 4 base gears for your magic bullet. Please note that this item only fits Magic Bullet. Does NOT fit Nutribullet,Mini or Baby Bullet
Replacement Parts for Nutri Ninja, Blender Blade Assembly and 2 Pack Single Serve 16-Ounce Cup Set for BL770 BL780 BL660 Professional Blender
- BEFORE PURCHASING – Please check your existing blade for the following 1) Count the FINS IT SHOULD BE 6-FINS. 2) The blade has MALE FINS. 3) 3.35″ (8.5cm) Diameter. 6 fins blade only fits for Ninja BL770, BL771, BL773CO ,BL780, BL660, BL740
- EASY TO USE – Simply attaches to Pro Extractor Blades included with your blender. The Pro Extractor Blades are able to crush through whole fruits, vegetables, nuts, and ice.
- EASY TO CLEAN – The 16-Ounce Cup and Blender Blade are Made of Eco-friendly materials, dishwasher safe, easy to clean.
- PACKAGE INCLUDE – 1* Single Serve Blade, 2 * 16-Oz Single Serve Cups with Lid
- MONEY-BACK GUARANTEE – It’s non-original aftermarket part. for any reason you’re not completely satisfied,can ask for a replacement or full refund.
Pro Blender Extractor Blade Assembly with Gasket, 7 Fins Blender Blade Replacement Parts for Nutri Ninja BlendMax DUO with Anto-IQ Boost
- ⚠ BEFORE PURCHASING please check your existing blade for the following 1) Count the FINS IT SHOULD BE 7-FINS； 2) The blade has MALE FINS； 3) 4 inches (10cm) Diameter.
- The blender blade replacement parts are made of food grade BPA Free plastic and stainless steel, effortlessly pulverizes fruits, vegetables, superfoods and protein shakes into a delicious, smooth texture. Dishwasher safe.
- The extractor blade assembly has the power to break down, pulverize and emulsify foods so you can unlock the hidden nutrition inside the foods that you eat!
- The extractor blade for Nutri Ninja blenders not only extracts all of your foods’ nutrients, but it actually breaks them down to a pre-digested state, easing the stress put on your digestive system and helping you achieve optimum health.
- 【100% SATISFACTION GUARANTEE】If you are not sure that is it compatible with your blender, please contact our service customer on Amazon. If you have any problems about the product you got, please feel free to contact us by after-sale card.
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy ninja blender parts 4 blade, eg:
- What are Top 10 ninja blender parts 4 blade for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 ninja blender parts 4 blade to buy?
- What are Top Rated ninja blender parts 4 blade to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) ninja blender parts 4 blade?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for ninja blender parts 4 blade.
- Before deciding to buy any ninja blender parts 4 blade, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose ninja blender parts 4 blade and What you should consider when buying the ninja blender parts 4 blade and Where to Buy or Purchase the ninja blender parts 4 blade. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 ninja blender parts 4 blade of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about ninja blender parts 4 blade.
Conclusion
By our suggestions above, we hope that you can found ninja blender parts 4 blade for you.Please don’t forget to share your experience by comment in this post. Thank you!
