activeitup 
Nowadays, there are so many products of water fuel separator filter kit aluminum in the market and you are wondering to choose a best one. You have searched for water fuel separator filter kit aluminum in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings water fuel separator filter kit aluminum which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
23,206 Reviews Scanned
iFJF R12T Fuel Filter/Water Separator 120AT NPT ZG1/4-19 Automotive Parts Complete Combo Filter fit Diesel Engine(Include Four Fittings)
- For R12T Marine Fuel Filter/Water Separator complete assembly.NPT,ZG1/4-19.(Include four fittings)
- The filter units are coated with a durable electrostatically applied powder coating for superior corrosion resistance.
- This spin-on filter design is simple to replace and the reusable clear nylon collection bowl and features a self-venting drain for removing unwanted muck and water.Tighten the valve, the water will not discharge. Release the valve, the water can be free to discharge.
- Filters are designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free fuel.
- Don’t be caught in the water without one of these diesel spin-on filters.
If you have difficulty in installing, you can go to YouTube to find the appropriate installation video:https://www.youtube.com/watch?v=LyeqTDVzY-A.
Specification:
1.Fuel Water Separating Filter fit 3/8 Inch NPT Outboard Motors as well.
2.Maximum Flow Rate 30 GPH (57 LPH).
3.Port / Connecting Size M18 X 1.5 Center Thread.
4.These are more suited to compact off road diesel equipment:tractors,skid steers loaders,movers.
5.Filter Rating 10 Micron.10 micron filters are over 90% efficient at removing particles as small as 10 microns. 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems, Designed to trap the smallest particles and emulsified water from Diesel.
Product details:
1.Don’t be caught in the water without one of these Diesel spin-on filters.
2.Filters are designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free Fuel.
3.The inlet and out let can be feed in on the same side or in one side out the other side.
4.Check and replace regularly.
R12T water separator and filter complete combo installation instruction:
1.Nylon collection bowl down when installed the water separator and filter.
2.This filter has four ports, two inputs and two outputs. We provide two plugs for the extra two ports. If you need to use two plugs, you must install them to the filter and tighten them.
3.Before installing the filter, you have to remove those plugs, teflon-tape them, and re-install them.Prevent leaks from these plugs.
4.All of the above steps are very simple to operate, you can manually disassemble, and then use the tool to install tighten.
Sierra 18-7982-1 Fuel Water Separator Kit
- Sierra fuel water separators remove over 99.8% of emulsified water from your gasoline
- Sierra’s 10 micron filters are over 90% efficient at removing particles as small as 10 micron
- All filters flow at 90 GPH to feed even the hungriest motor
- Prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems
Sierra fuel water separators remove over 99.8% of emulsified water from your gasoline. Sierra’s 10 micron filters are over 90% efficient at removing particles as small as 10 microns. All filters flow @ 90 GPH to feed even the hungriest motor. Sierra 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems.
Replacement Marine Fuel Filter Water Separator Kit with Aluminum Head – 3/8 Inch NPT Port – Replaces 35-60494-1, S3213, 18-7932-1, 18-17928, 35-809097 – Clear Re-usable bowl with Fittings
- REPLACEMENT FUEL FILTER WATER SEPARATOR KIT – screens out dirt, rust and other particles from the fuel before entering the system of the vehicle. Undesired substances that are not filtered may cause rapid wear of the fuel pump, injectors and worse cause them to fail. These filters needs to be changed regularly to maintain desirable performance and efficient fuel economy.
- PERFECT FOR VARIOUS APPLICATIONS – This fuel filter water separator kit is perfect for a variety of universal fuel applications. Mostly used on outboard marine engines, the aluminum filter head is capable of filtering from 2 sources, 2 fittings to block or close an inlet or outlet is also included if intended for filtering from a single source only.
- REPLACES PART# 35-60494-1, S3213, B32013, 18-7932-1, 18-7932, 18-7928-1, 18-7928, 35-809097, Yamaha MAR-24563-03-00, 18-7919, 18-7919-1, 35604941, B32013, 1879321, 187932 , 1879281, 187928, 35809097, MAR245630300, 187919, 1879191. The fuel filter included has a 10 micron rating which means it has over 90% efficiency of filtering out particles as small as 10 microns for maximum engine protection over unwanted particles aside from fuel.
- OEM FIT, QUALITY, FINISH – While this is not a genuine Quicksilver, Sierra, Mercury Marine, Mercruiser, GLM, Mallory, Moeller fuel filter kit, it is a direct replacement manufactured by AA Ignition. This fuel filter water separator kit features a lot of benefits including an outlet at the bottom to drain water without dismantling the assembly and a clear bowl lets you see the quality of fuel being used.
- 2 YEAR WARRANTY – This fuel filter water separator kit comes complete with a 2 year warranty. If the part ever fails on your Bravo Mag, OMC, Stringer, Sterndrive boat, MPI, EFI, MX V8 V6 engine within the warranty period simply contact us for a replacement. Save time and money by purchasing this part and taking advantage of our warranty.
The fuel filter water separator screens out dirt, rust and other particles from the fuel before entering the system of the vehicle. Undesired substances that are not filtered may cause rapid wear of the fuel pump, injectors and worse cause them to fail.
Suitable for various applications including marine outboard setups
Benefits of having this set up:
- Largel fuel filtering capacity than standard fuel filters
- Larger water capacity than standard fuel filters
- Clear bowl lets you know when it’s time to drain the water
- Visibility of fuel quality being used
- Flexibility of inlet and outlet configurations
Replaces part numbers: 35-60494-1, S3213, B32013, 18-7932-1, 18-7932, 18-7928-1, 18-7928, 35-809097, Yamaha MAR-24563-03-00, 18-7919, 18-7919-1, 35604941, B32013, 1879321, 187932 , 1879281, 187928, 35809097, MAR245630300, 187919, 1879191.
This is a compatible replacement part manufactured by AA Ignition. This Fuel Filter Kit is NOT a genuine Quicksilver, Sierra, Mercury Marine, Mercruiser part. Mercury, Mercruiser, Sterndrive and their associated models and part numbers are used in this listing only to identify the models this Fuel Filter Kit fits.
GOLDENROD (596-3/4) Canister Water-Block Fuel Tank Filter with 3/4" NPT Top Cap
- Water-Block filter removes water from gasoline and diesel fuel
- Water-absorbing polymers trap water, restricting fuel flow when it is time to replace the canister
- Removes microscopic particles (10 microns) of rust, sand, dirt, scale, and lint
- Zinc die-cast top cap with 3/4″ NPT pipe fittings
- Entire canister can be thrown away and replaced
- Maximum recommended flow rate of 25 GPM
- working pressure up to 50 psi
U.S. made water-absorbing canister fuel tank filter with 3/4″ NPT top cap.
Aluminum Marine Fuel Water Separating Filter 3/8 Inch NPT Port for Outboard Motor Mercury 35-60494-1 Reusable Bowl Anti Corrosion 10 Micron Filter(Include Four Fittings)
- Material:The filter is made of aluminum.Anti-oxidation/corrosion.Long service life.
- Features:10 micron filters are over 90% efficiency at removing particles as small as 10 microns.10 micron filters are recommended to protect sensitive inboard,sterndrive and outboard fuel injection systems.
- Usage:Designed to trap the smallest particles and emulsified water from diesel.
- Function:It contributes to clear contaminates protect fuel system.Well sealed.Perfect water fuel separating performance.
- Water separating canister:High performance 3/8 NPT ports offer lower pressure drop rates.
Replaces Mercury 35-60494-1.
Replaces Racor S3213, B32013,18-7932-1,18-7932,18-7928-1,18-7928.
Filter Replaces Mercury Marine 35-809097,Racor S3213,Yamaha MAR-24563-03-00,18-7919,18-7919-1.
To replace element:
1.Drain the unit by loosen the drain screw.
2.Loosen and remove the filter element.
3.Loosen and remove the bowl from filter element.Please note the bowl is reusable,do not dispose unless broken.
4.Wipe O-ring gland clean,and coat bowl’s seal O-ring with fresh oil or grease and place it back to the gland.Then tighten the bowl onto filter element firmly by tool.
5.Coat filter element’s seal O-ring with fresh oil or grease and attach filter element onto filter head,and the tighten securely by tool.
6.Run engine and check for fuel leakage.
Attention:
1.Make sure you remove both the filter and the filter bowl from the mounting housing and put a light film of fuel on the o-ring.As delivered it will leak without the lubrication to allow for the proper crush.
2.For diesel transfer tank to filter the fuel before it enters the main tank.Only thing is you have to make sure to get the proper sealant for the threads. For The First time installation,in order to avoid any leaking at the threads.You’d better get some thread paste since the tape might plug the injectors if it were to come loosen.
3.Check and replace regularly.
Instructions:
To Drain Water:
1.Loosen drain screw to drain bowl of water.
2.Tighten drain screw.
3.Run engine and check for fuel leakage.
Safety Warning:
Periodically check fittings and filter element for leaks.Be careful when changed fuel filter element.Diesel is extremely flammable and highly explosive under certain conditions.Avoid spilling diesel.Always stop engine and do not smoke or allow open flames in the area while changing filter element.
Similar items with 4 stars and above
Replacement S3213 18-7932-1 Fuel Water Separator Filter Kit Assembly
18-7932-1 18-7932 Marine Fuel Filter Water Separator Assembly Including 1*18-7919 filter,1*18-7853-1 bracket,1*18-7922 Clear Bowl,2*18-4256 1/4″ pipe plugs. For Application:Marine Racor,Mercury
Ebely R12T Fuel Fittings Marine Spin-on Fuel Filter Water Separator 120AT NPT ZG1/4-19 Fit Gasoline Engine and Diesel Engine
- Fitment：Gasoline Engine and Diesel Engine
- This R12T fuel filter water separator is equipped with a self-draining drain to remove unnecessary dirt and water, the filter design is easy to replace, and the reusable transparent nylon collection bowl
- This is a separator for diesel and water, and a separator for gasoline and water.
- The flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean
- The filter unit coated with a durable coating of electrostatic powder coating, having excellent corrosion resistance
Item specifics:
PRODUCT TYPE : Filter Fuel/water Separator
-This listing is for one (1) unit. This is a new For Racor R12T Marine Fuel Filter / Water Separator complete assembly.
Product Type Filter Fuel/Water Separator
Description Replacement Fuel Filter/Water Separator
-Maximum Flow Rate 15 GPH (57 LPH)
-Filter Rating 10 Micron
-Port/Connecting Size M18 X 1.5 Center Thread
-Additional Detail Used In Model 120A Filter Assembly
Dont’ be caught in the water without one of these diesel spin-on filters. filters are designed for high performance applications, and with flow rate of 15 GPH on the R12T model, your engine will perform better than ever with clean, water-free fuel. These filter units are coated with a durable electrostatically applied powder coating for superior corrosion resistance. The unit features Racor’s famous Aquabloc II technology. This spin-on filter design is simple to replace and the reusable clear plastic collection bowl and features a self-venting drain for removing unwanted muck and water.
Sierra 18-7983-1 Fuel Water Separator Kit
Sierra fuel water separators remove over 99.8% of emulsified water from your gasoline. Sierra’s 10 micron filters are over 90% efficient at removing particles as small as 10 microns. All filters flow @ 90 GPH to feed even the hungriest motor. Sierra 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems. Contains: 1 – 18-7944 and 1 – 18-7853-1 Replaces: Mercury – 35-802893A4, Q4, 35-60494A4
GOLDENROD 496 Automotive Accessories
- Auto & Truck Maintenance
- Country of manufacture: United States
- Manufacturer: GOLDENROD
- Zinc die-cast top cap with 1″ NPT pipe fittings
- For use with GOLDENROD See Thru bowl fuel tank filter models 495, 495-1, 496, and 496-1 only
- Not for use with biodiesel blends over 20 percent or GOLDENROD bowl fuel tank filter models 497 or 497-1
- Made in the U.S.A.
Bowl fuel tank filter top cap with 1″ NPT pipe fittings for standard and water-absorbing GOLDENROD bowl fuel tank filters.
Replacement S3213 Fuel Water Separator Filter Kit Assembly Boat Fuel Filter Marine Engine Fuel Water Separator for Mercury Yamaha Outboard 10 Micron
- BRAND:IVSPEED,Material:The filter is made of aluminum. Anti-oxidation/corrosion. Long service life.
- Include:IVSPEED S3213 assy,PTFE-tape,Memo Pad,Hose Clamp.Features:10 micron filters are over 90% efficient at removing particles as small as 10 microns. 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems.
- Usage:Designed to trap the smallest particles and emulsified water from gasoline.
- Function:It contributes to clear contaminates protect fuel system.
- Water separating canisters:High performance 3/8 NPT ports offer lower pressure drop rates.
Replaces Mercury 35-60494-1 and Universal.
How use?
1.Before installing the filter, please check those Tubing and plugs,PTFE-tape is use to Prevent leaks from these plugs.
tips:1m PTFE-tape include.
2,install the plugs,Connect the fuel pipe and use the Hose Clamp to lock.
3.All of the above steps are very simple to operate, you can manually disassemble, and then use the tool to install tighten.
replace element:
1.Drain the unit by loosens the drain screw.
2.Loosen and remove the filter element.
Please ensure that the assembly is stable.
3.Loosen and remove the bowl from filter element.Please note the bowl is reusable,do not dispose unless broken.
(Professional tools may be required to remove bowls and filter element)
4.Wipe O-ring gland clean,and coat bowl’s sealing O-ring with clean oil or grease and place it back to the gland.The tighten the bowl onto filter element firmly by hand.
5.Coat filter element’s sealing O-ring with clean oil or grease and attach filter element onto filter head,and the tighten securely by hand.
6.Run engine and check for fuel leakage.
Instructions
To Drain Water:
1.off engine,Loosen drain screw to drain bowl of water.
2.Tighten drain screw.
3.Run engine and check for fuel leakage.
Warning:
Periodically check fittings and filter element for leaks.Be careful when changing fuel filter element .Gasoline is extremely flammable and highly explosive under certain conditions.Avoid spilling gasoline.Always stop engine and do not smoke or allow open flames in the area while changing filter element.
Tips:
replace element by tool
replace element at regular.
CHECK THE ELEMENT SUGGEST:EACH 7000KM/400 HOURS.
Package include:
1 IVSPEED S3213 assy
1*1M PTFE tape
1*Memo sticker for time or KM when use
2*Miniature Stainless Worm Gear Hose Clamp
1*Manual(some mode)
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy water fuel separator filter kit aluminum, eg:
- What are Top 10 water fuel separator filter kit aluminum for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 water fuel separator filter kit aluminum to buy?
- What are Top Rated water fuel separator filter kit aluminum to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) water fuel separator filter kit aluminum?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for water fuel separator filter kit aluminum.
- Before deciding to buy any water fuel separator filter kit aluminum, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose water fuel separator filter kit aluminum and What you should consider when buying the water fuel separator filter kit aluminum and Where to Buy or Purchase the water fuel separator filter kit aluminum. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 water fuel separator filter kit aluminum of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about water fuel separator filter kit aluminum.
Conclusion
By our suggestions above, we hope that you can found water fuel separator filter kit aluminum for you.Please don’t forget to share your experience by comment in this post. Thank you!
