activeitup 
Nowadays, there are so many products of sharkbite reducers for ice maker in the market and you are wondering to choose a best one. You have searched for sharkbite reducers for ice maker in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings sharkbite reducers for ice maker which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Sharkbite 25032A Ice Maker Outlet Box, 1/2 inch x 1/4 inch Compression, Push-to-Connect Copper, PEX, CPVC, PE-RT Pipe
- INSTALLS IN SECONDS: Ice Maker Box requires no special tools, no soldering, no crimping, unions or glue. Just push to create a watertight seal to the SharkBite fitting
- COPPER, PEX, CPVC: SharkBite fittings fit copper tubing, CPVC, PEX or PE-RT pipe in any combination
- LEAD FREE COMPLIANT: DZR lead free brass SharkBite valves
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection
The SharkBite Ice Maker Outlet Box is integrated with SharkBite push-to-connect ends to allow for quick and easy installation of a water main supply and shutoff for refrigerator ice maker and water dispenser appliances using Copper, PEX, CPVC, or PE-RT water lines. This is lead-free compliant and is offered with or without integral water hammer arrestors for water shockwave prevention. The box can be mounted to the left or right of the stud bay and needs no additional support framing. The snap-on faceplate accommodates up to 3/4″ drywall. 1/2″ SB X 1/4″ Compression Can be used with copper, cpvc or pex lines Decease the time & effort needed to connect water distribution pipe, no glue, soldering or crimping needed Simply cut your pipe, deburr, mark the pipe approximately 1″ For proper insertion depth, install pipe to proper depth Use behind your refrigerator, ice maker, or water dispenser to provide a clean installation & allow for easy shut off Includes the ice maker outlet box Faceplate cover, 2 support brackets.
SharkBite PEX Tubing Cutter, 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch, 1 Inch Tube Cutter, U701A
- CUTS IN SECONDS: For clean, straight cuts PEX Tubing Cutters are an integral tool in the easy-to-install SharkBite Connection System.
- PEX TUBING: For clean, straight cuts, use with 1/4 Inch, 3/8 Inch, 1/2 Inch, 3/4 Inch and 1 Inch SharkBite PEX tubing
- COMPATIBLE PRODUCT: Same as part number U701Z and U701A
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F and can be reused up to four times
Product Description
SharkBite PEX Tubing Cutter
For clean, straight cuts, use with 1/4″, 3/8″, 1/2″, 3/4″ and 1″ SharkBite PEX tubing. Place PEX tubing inside cutter. Squeeze PEX Cutter Tool on PEX tube and tool easily adjusts to PEX tube dimensions. Push handles together until it you hear the click and you’re done.
CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.
Connect pipe in seconds with relative ease using any SharkBite Push-To-Connect fitting. No soldering, clamps, glue required. It’s as simple as inserting the pipe into the fitting deep enough to be sealed by our specially-formulated O-ring. The Shark Bite PEX tubing cutters are an integral tool in the easy-to-install SharkBite Connection System.
Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no-fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
SHARKBITE
SharkBite is a provider of plumbing and water control systems for domestic, commercial and industrial applications. As the world leader and hallmark of push-to-connect plumbing solutions, our goal is to continue innovating the plumbing trade with new solutions that improve efficiency and performance. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves, and PEX pipe, making it the only total plumbing solution from meter to fixture.
From the Manufacturer
Used to cut 1/4″, 3/8″, 1/2″, 3/4″ and 1″ SharkBite PEX tubing.
SharkBite U359LFA 1/2-Inch by 1/2-Inch by 1/4-Inch Reducing Tee Retail Packaging
- The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in any combination
- No soldering, clamps, unions or glue required
- Certified to 200 PSI and 200-DegreeF
- Compact, robust DZR brass body is the foundation of a strong, corrosion resistant, durable fitting
- The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in any combination
- Certified to 200 PSI and 200-DegreeF
- Compact, robust DZR brass body is the foundation of a strong, corrosion resistant, durable fitting
Product Description
The SharkBite push-fit fittings are the fastest, easiest way to join copper, CPVC, or PEX tubing in any combination. Each fitting increases ease of use while decreasing the time and effort needed to connect water distribution pipe. There is no glue, soldering or crimping needed. Simply cut your pipe, debar, mark the pipe approximately 1 (for proper insertion depth), install pipe to proper depth and you’re done.
From the Manufacturer
The SharkBite push-fit fittings are the fastest, easiest way to join copper, CPVC, or PEX tubing in any combination. Each fitting increases ease of use while decreasing the time and effort needed to connect water distribution pipe. There is no glue, soldering or crimping needed. Simply cut your pipe, debar, mark the pipe approximately 1 (for proper insertion depth), install pipe to proper depth and you’re done.
SharkBite U058LFA 1/2-Inch by 3/4-Inch SharkBite Lead Free Reducing Coupling
Product Description
When transitioning pipe size, there is no easier way than with SharkBites push-fit reducing couplings. There is no need for solder, glue, clamps or unions, simply push-to-connect and move on. This quick connect fitting is designed for potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. It is also rated to 200F and 200 psi. 3/4″ x 1/2″ For use with copper tubing CTS, CPVC & Pex with integral tube liner included Constructed of DZR brass Certified to 200 PSI & 200 degrees fahrenheit Design certified to ASSE1061/NSF61 standards Meets UPC, IPC & CUPC requirements Fittings are listed with IAPMO & are certified for use on potable & hydronic water distribution Certified for underground applications & as a manufactured joint without the need for access panels Lead free compliant to federal law 111-380 Bagged.
From the Manufacturer
SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.
SharkBite 22222-0000LFA Ball Valve 1/2 Inch x 1/2 Inch, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT
- INSTALLS IN SECONDS: 1/2 inch ball water valve requires no special tools, no soldering, no crimping or glue. Push to connect design provides an efficient application that saves time and money. Just push to create a watertight seal
- VERSATILE: Shark Bite Ball Valve plumbing fittings fit Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
- LEAD FREE: Made of high quality forged lead free DZR brass.
- QUALITY: Only Shark Bite’s quality and performance is field-proven with more than 550 million connections. Shark Bite is the only push-to-connect brand than can ensure a clean, leak-free connection
- PERFORMANCE: 200 PSI and 200 degrees F. Use in potable water and hydronic heating applications.
Product Description
SharkBite 1/2″ Ball ValveSharkBite uses high-quality brass for our 1/2″ x 1/2″ brass push-to-connect ball valve with a single ball valve handle. The full port ball valve allows water to pass through the valve easily and freely, with the reliable option to turn off the water supply fast! Quick and easy to install a new valve or to fix a leaking water pipe. Our ball valves can be easily rotated after installation making it a cinch to shut off water in an emergency or work in tight spaces.Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no-fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.CUT. PUSH. DONE. The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless-steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue.
From the Manufacturer
SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.
SharkBite 23036-0000LF 1/2" Ptc x 3/8" Compression Angle Stop Valve
- INSTALLS IN SECONDS: 1/2 inch push-fit x 3/8 inch threaded compression angle shut off valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal
- PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications
- COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
- RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications
Product Description
SharkBite1/2″ X 3/8″ Compression Angle Stop Valve We use high quality DZR Lead Free Brass for our 1/2 x 3/8 Quarter Turn Angle Stop Ball Valve. Chrome plated valve for an attractive appearance. Used where a water pipe enters a room allowing easy water shut off for maintenance, repair, installing a toilet pipe valve or faucet to your water system with no need to turn off your main supply valve. CUT. PUSH. DONE. The Shark Bite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the Shark Bite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. Shark Bite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, Shark Bite fittings are the push-to-connect solution for leak-free results.
From the Manufacturer
SharkBite 23036-0000LF Angle Stop 1/2-Inch X 3/8-Inch Compression Lead Free
Conclusion
By our suggestions above, we hope that you can found sharkbite reducers for ice maker for you.Please don’t forget to share your experience by comment in this post. Thank you!
