activeitup 
Nowadays, there are so many products of pvc ice maker line in the market and you are wondering to choose a best one. You have searched for pvc ice maker line in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings pvc ice maker line which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
FS-TFC Ice Maker Water Line Kit and Refrigerator Water Line Fridge Water Line Kit for Reverse Osmosis Systems & Water Filters, 25ft 1/4" Tubing with 1/4" Push-In and Compression Fittings
- 【Easy installation】Push-in quick connect fittings offer easy DIY installation with no tools required
- 【Compatibility】Works with most reverse osmosis and water filter systems using 1/4 inch standard tubing
- 【Effectiveness】Enjoy clear & delicious pure ice cubes and RO water at your fridge dispenser
- 【Multi-purpose】Provides water to refrigerators,Reverse Osmosis (RO) filter system,ice makers, water coolers and dispensers, humidifiers and more
- 【Pakage includes】Kit includes 25 feet 1/4″ tubing, a 1/4″ x 1/4″ x 1/4″ “T” valve, an inline 1/4″ x 1/4″ shut off valve, a compression fitting set.
Why choose the ice maker kit?1. This high-quality icemaker kit will provide you with clear and sparkling ice cubes and drinking water at your refrigerator by routing purified water from your existing reverse osmosis system. 2. The tested design allows users to connect and disconnect quick and easy without the need of any other tools. Applications include multiple potable liquids such as reverse osmosis drinking water, beverage dispensing, coffee machines, RV and Marine, misting systems, ice makers and many more. 3. If you have a reverse osmosis system and a refrigerator with an ice maker and/or water dispenser, this kit is perfect for you. A reverse osmosis filtration system hands down out performs a single inline carbon filter found in most popular refrigerators. So it’s smart to connect RO with your refrigerator’s water line. Parts List: -1/4 inch water tubing (25 ft. ) -a 1/4″ x 1/4″ x 1/4″ “T” valve -an inline 1/4″ x 1/4″ shut off valve -a compression fitting -a independent inline 1/4″ x 1/4″ valve 100% quality assurance. If you have any problems, please contact us, we’ll reply to you in 24 hours.
Eastman 48392 Flexible Stainless Steel Braided Ice Maker Connector with Brass Nuts, 1/4-Inch Comp X 1/4-Inch Comp, 25-Feet
- LENGTH: The line length of this ice maker connector is 25-feet
- CONNECTION: This connector has 1/4-inch Comp x 1/4-inch Comp connection
- MATERIAL: This ice maker connector hose is made of high-impact braided 304 stainless steel exterior with a PVC core, nylon reinforcement and a clear vinyl outer shell which provides strength
- DURABLE: The sturdy stainless steel supply line makes it durable preventing kinking and has nickel-plated brass nuts which ensure tight fitting
- EASY INSTALLATION: This flexible supply line is very easy to install
Product Description
The Eastman 48392 Ice Maker Connector has a 1/4-inch comp x 1/4-inch comp connection and is 25-feet long. It is an ideal ice maker connector for use, featuring a grade 304 stainless steel braided exterior, plc. core, multi-filament braided nylon reinforcement, and a clear vinyl outer shell. For secure fitting, it comes with nickel-plated brass nuts.
Eastman’s 25′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. This flexible supply line resists corrosion and enables easy installation.
MAINTAINANCE: For use with water in accessible locations only.
• Shut off the water before installing.
• Inspect product before installing. Do not use if damaged in any way.
• Metal nuts – HAND-TIGHTEN, plus ¼ turn with a wrench.
• Do not over tighten.
• Do not use thread lubricants, tape, or putty.
• Do not expose to corrosive materials.
• Over tightening, using lubricants or exposure to corrosive materials can damage nut, connector, valves, or appliance and cause failure, leaking, or flood and property damage.
• This part must be inspected after installation and every six months thereafter. Replace if damaged, leaking or corroded.
• DO NOT reuse
• CAUTION: Improper installation can cause leaks with water damage.
From the Manufacturer
Eastman’s 25′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.
PEX Ice Maker Installation Kit – 25 Feet of Tubing For Appliance Water Lines With Stop Tee For Quick Installation, 1/4” Compression Fittings, Flexible Hose For Potable Drinking Water
- COMPLETE ICE MAKER WATER LINE KIT: Crosslinked High Density Polyethylene, PEX, hose is extremely durable. It won’t corrode and can’t be damaged from expansion or contraction. Easily withstands temperature and pressure stresses that occur in water systems. Flexible, one piece design includes 1/4” compression fittings at each end. Perfect for refrigerator, freezer, humidifier and water filter connections.
- INSTALLS IN MINUTES AND LEAVES NO ODORS OR BAD TASTE: Complete your maintenance or fix your appliances quickly and easily. This kit is designed to get the job done fast without inconveniencing yourself or other members of your household. The stop tee valve quickly and neatly connects to your current set up to divert the water where you want it to go.
- COPPER STOP TEE allows you to safely use this set up for your ice makers, humidifiers, water filters and other potable drinking water applications. Stop tee measures 1/4″ x 3/8″ x 3/8″ and is ready to connect to existing supply stops.
- HIGH QUALITY AND SAFE PEX AND COPPER. The PEX tubing is extremely reliable and long lasting. It is NSF 14, NSF 61 and ASME A112.18.6 certified. The copper stop tee is sturdy, durable, and long lasting. Great for both contractors and DIYers. Includes clear instructions to complete your set up quickly.
- LIMITED LIFETIME WARRANTY. 25 feet of PEX tubing and 1/4” x 1/4” compression fitting. Stop tee measures 1/4″ x 3/8” x 3/8”. Limited lifetime warranty. Choice Hose and Tubing part number 509 5164K.
Complete Ice Maker And Humidifier Installation Kit | 25’ PEX Tubing, With Easy To Use Stop Tee, Includes Everything Necessary For A Complete Installation
LDR 509 5100 Ice Maker/Humidifier Installation Kit, 1/4-Inch x 25-Foot, Poly Tubing
Product description
Highlights: For installation of humidifiers iice makers and evaporative coolers Include 1/4 x 25 poly tubing, and self piercing saddle valve 1 Kit/Polybag.
From the Manufacturer
LDR 509 5100 Ice Maker/Humidifier Installation Kit , 1/4-Inch X 25-Foot, Poly Tubing. 1/4-Inch X 25-Foot Ice Maker/Humidifier Installation Kit With Poly Tubing includes tubing, self-piercing saddle valve and fitting. Install ice maker or humidifier without turning water off.
Eastman 41033 Stainless steel Icemaker Connector 1/4" Comp x 1/4" Comp x 60" length – Stainless Steel – 12 Pack
- LENGTH: The line length of this ice maker connector is 5-feet
- CONNECTION: This connector has 1/4-inch Comp x 1/4-inch Comp connection
- MATERIAL: This ice maker connector hose is made of high-impact braided 304 stainless steel exterior with a PVC core, nylon reinforcement and a clear vinyl outer shell which provides strength
- DURABLE: The sturdy stainless steel connector makes it durable preventing kinking and has nickel-plated brass nuts which ensure tight fitting
- EASY INSTALLATION: This flexible supply line is very easy to install
Product Description
The Eastman 41033 Ice Maker Connector has a 1/4-inch comp x 1/4-inch comp connection and is 5-feet long. The supply line features a PVC core, multi-filament braided nylon reinforcement, a clear vinyl outer shell and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping making it long-lasting. It consists of nickel-plated brass nuts which ensure secure fitting.
Eastman’s 5′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. This flexible supply line resists corrosion and enables easy installation.
MAINTAINANCE: For use with water in accessible locations only.
• Shut off the water before installing.
• Inspect product before installing. Do not use if damaged in any way.
• Metal nuts – HAND-TIGHTEN, plus ¼ turn with a wrench.
• Do not over tighten.
• Do not use thread lubricants, tape, or putty.
• Do not expose to corrosive materials.
• Over tightening, using lubricants or exposure to corrosive materials can damage nut, connector, valves, or appliance and cause failure, leaking, or flood and property damage.
• This part must be inspected after installation and every six months thereafter. Replace if damaged, leaking or corroded.
• DO NOT reuse
• CAUTION: Improper installation can cause leaks with water damage.
From the Manufacturer
Eastman’s 5′ Stainless Steel Icemaker Connector is the standard in icemaker supply lines. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.
Eastman 48996 Reinforced PVC Icemaker Connector 1/4" Comp x 1/4" Comp x 12" length – Reinforced PVC – 25 Pack
- CONNECTION: This connector has 1/4-inch x 1/4-inch connection
- LENGTH: The line length of this ice maker hose is 1-foot
- MATERIAL: The reinforced PVC material of this appliance hose provides strength and durability preventing it from kinking and crimping
- NUTS: The connector has nickel-plated brass nuts which ensure tight fitting
- APPROVED: This connector meets AB1953 as well as CUPC standards
The Eastman 48996 Appliance Ice Maker Connector has a 1/4-inch x 1/4-inch connection and is 1-foot long. The supply line features reinforced PVC that is designed to prevent kinking and crimping making it long-lasting. It consists of nickel-plated brass nuts which ensure secure fitting.
This appliance hose is poly bagged and meets the AB1953 as well as CUPC standards.
CAUTION: Improper installation can cause leaks with water damage.
Similar items with 4 stars and above
Watts K-1 Polyethylene Icemaker Kit, 25-Feet
Product Description
This Watts icemaker kit comes with 25-Feet of polyethylene tubing and a self-tapping saddle valve. It is durable and long lasting. This kit is easy to install for the contractor or homeowner. Kit includes self-piercing saddle valve.
From the Manufacturer
This Watts icemaker kit comes with 25-Feet of polyethylene tubing and a self-tapping saddle valve. It is durable and long lasting. This kit is easy to install for the contractor or homeowner. Kit includes self-piercing saddle valve.
Eastman 48398 Copper Ice Maker Installation Kit with Self-Piercing Saddle Valve and 15 ft. Copper Tube
- CONTENTS: Eastman’s 15 foot Copper Icemaker Installation Kit includes everything you need to connect a water line to your icemaker. The icemaker installation kit includes 1/4-inch x 15′ Copper Tube, Self-piercing saddle valve,1/4-inch Union, Female flare x 1/4-inch Comp adapter
- COMPATIBILTY: It is a universal icemaker hookup kit which can easily fit most major refrigerator brands. The 15 ft. roll of copper tubing can be cut to length for a perfect fit
- DURABLE: The copper body of the tube provides long-lasting durability
- MATERIAL: The tube is made of high quality, heavy-duty copper which provides strength and durability
- EASY INSTALLATION: The ice humidifier package includes additional hardware which makes it easy to install without any hassle
Product Description
The Eastman 48398 Ice Maker Installation Kit is the perfect solution for any household. It includes a 15 Feet tube which is made of high-quality copper that provides strength and durability. The 15 ft. roll of copper tubing can be cut to length for a perfect fit.
The kit is universal which fits many major refrigerator brands with ease and provides water to ice-makers, ice and water dispensers. The package includes 15′ copper water supply line, 1 self-piercing saddle valve and union, and a female flare x comp adapter. The Eastman Icemaker Installation Kit includes everything you need to connect a water line to your icemaker.
From the Manufacturer
Eastman’s 15′ Copper Installation Kit includes everything you need for easy installation. The kit fits most refrigerators and provides water to icemakers, ice and water dispensers. Packaging includes a 15′ copper water supply line, 1 self-piercing saddle valve and union, and a female flare x comp adapter. Additional installation hardware is included.
Refrigerator Icemaker Kit 1/4" Od Ro Ice Maker for Reverse Osmosis Systems Refrigerator Water Filters
- Fluid Admitted:Air, Vacuum, Water (No Freezing)
- Working Pressure:0-1.0mpa | 0-150psi. Proof Pressure:3.0Mpa | 435psi
- Negative Pressure-100Kpa | -29.5 In Hg. Body: Brass Seal, O-Ring NBR
- Working Temperature: 0-50°C | 32～140°F. Applicable Tube:PU / PA / PE / PVC
- push to connect water fittings 1/4″ 2 valve 2 tee 2 elbow 2 straight 1/4 od 16.5 feet nylon tube
User’s Guide
1. Except air and water,don’t attempt to use the fittings on other fluids
2. The tube fitting is prohibited where spark and fire might be occurred
3. The tube fitting is prohibited if water temperature is above 60’C
4. Never apply tube joint with additional external load(bending,twist or
pulling),otherwise damage or leakage will be occurred.
Caution
Check the end of tubing for a right angle cutting and check the external surface of
tubing for any damage or scratch.Please refer to following instruction in connection
of tubing.When you insert the air tubing into the joint,you will have two-step
feeling.Section one is locking claw and section two is sealing ring.Must insert tube
into section two.
Sleeve is used in tubing connection and disconnection.The sleeve is designed as an
oval shape,which is covienient in assembly and disassembly.However,round sleeve is
available to met any special demand the product has limited space for oval
sleeve.After connection of tube joint and tubing,always try to pull tubing and ensure
its firm connection.
Always use proper tool to tighten external hexagonal and internal hexagonal parts of
the tube fitting.Always apply recommended torque on screws otherwise extra torque
might damage thread and cause air leakage while insufficient torque might cause
loose screws and air leakage.
After Screws are tightened,you may adjust the direction of tubing with most of our
tube joint.If it is hard in adjustment,you may apply recommended torque to turn
screw to adjust direction of tubing.
Sharkbite 25032A Ice Maker Outlet Box, 1/2 inch x 1/4 inch Compression, Push-to-Connect Copper, PEX, CPVC, PE-RT Pipe
- INSTALLS IN SECONDS: Ice Maker Box requires no special tools, no soldering, no crimping, unions or glue. Just push to create a watertight seal to the SharkBite fitting
- COPPER, PEX, CPVC: SharkBite fittings fit copper tubing, CPVC, PEX or PE-RT pipe in any combination
- LEAD FREE COMPLIANT: DZR lead free brass SharkBite valves
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection
The SharkBite Ice Maker Outlet Box is integrated with SharkBite push-to-connect ends to allow for quick and easy installation of a water main supply and shutoff for refrigerator ice maker and water dispenser appliances using Copper, PEX, CPVC, or PE-RT water lines. This is lead-free compliant and is offered with or without integral water hammer arrestors for water shockwave prevention. The box can be mounted to the left or right of the stud bay and needs no additional support framing. The snap-on faceplate accommodates up to 3/4″ drywall. 1/2″ SB X 1/4″ Compression Can be used with copper, cpvc or pex lines Decease the time & effort needed to connect water distribution pipe, no glue, soldering or crimping needed Simply cut your pipe, deburr, mark the pipe approximately 1″ For proper insertion depth, install pipe to proper depth Use behind your refrigerator, ice maker, or water dispenser to provide a clean installation & allow for easy shut off Includes the ice maker outlet box Faceplate cover, 2 support brackets.
Conclusion
By our suggestions above, we hope that you can found pvc ice maker line for you.Please don’t forget to share your experience by comment in this post. Thank you!
