activeitup 
Nowadays, there are so many products of welding rods for air conditioning refrigerator gas in the market and you are wondering to choose a best one. You have searched for welding rods for air conditioning refrigerator gas in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings welding rods for air conditioning refrigerator gas which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Sheicon Copper Phosphorus Welding Rods For Air Conditioning Refrigerator Gas Welding (4.5)
- Model: Phosphor Bronze Electrode BCu93P (HL201 / BCuP-2)
- Size: Thick 1.3mmx wide 3.2mm length 400mm
- Uses: General for the mechanical and electrical instrumentation industry, brazing from impact load of copper and brass parts.
- Phosphor Bronze Electrode BCu93P (HL201 / BCuP-2): Composition P: 6.80-7.50%, Copper: Balance. Melting temperature of 710-793 ℃, the solder flow is good, can flow into the gap is very small joints
- Suitable for refrigerator air-condition welding
1 lb about 37 rods.
2 lb about 75 rods
3 lb about 113 rods
4 lb about 150 rods
4.5 lb about 170 rods
MANATEE Nitrogen Regulator with 0-800 PSI Delivery Pressure, CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection Durable Brass Accurate and Dependable – HVAC Purging Solid Brass
- ✔ INTRODUCING NEW Nitrogen Regulator – Regulates Nitrogen flow with up to 800 psi of pressure.
- ✔ EASY TO READ – The gauges on this Nitrogen Regulator are easy to read as well as protected with a rubber bumper.
- ✔ LARGE (T) HANDLE – The large T style handle is designed for easy adjustment.
- ✔ HIGHLY DURABLE – Made of highly durable brass, you can count on this Nitrogen Regulator to work accurately and efficiently all the time.
- ✔ VERSATILE CONNECTION – Featuring a CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection designed for easy installation
Interdynamics C PRO MRL-3 R-134a Super Seal Air Conditioning Stop Leak Kit-3 oz
The commonly used air conditioning sealer has been on the market since the days of R-12, with little change. However, the introduction of metal component sealers in recent years has revolutionized the industry of air conditioning sealers. While in the air conditioning system, it remains a liquid lubricant and contains additives to penetrate and rejuvenate O-rings, gaskets and other rubber connectors to prevent leakage. Included in Super Seal is a drying agent that gets rid of any moisture that may be inside the air conditioner. If the refrigerant leak occurs in a metal part, the refrigerant leaves the system and chills the outside air causing condensation. This moisture activates the Super Seal fluid to form a scab on the exterior of the metal.
2 Pack BPV31 Bullet Piercing Tap Valve Kits Compatible with 1/4, 5/16, 3/8 Inch Outer Diameter Pipes and R134A Air Conditioning Refrigerant Charging Hose with Gauge, Connect to R12/ R22 Port Only
- Sturdy material: made of corrosion-resistant metal, won’t wear out or rust over time, a convenient replacement part for you to use
- The hose adopts quality rubber material, good pressure resistance and reliable
- R22 R12 charging hose: 19 inch in length, only can be applied with home refrigerator adding refrigerant, come with gauge for easily viewing during use, connect to the R-12/ R-22 service port for easy conversion
- It fits only those cans with the thread of 1/2 inch
- BPV-31 bullet piercing tap valve: replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31, also compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes
- Package includes: 2 packs BPV-31 bullet piercing tap valve kits (each kit including 1 x piercing valve, 1 x hex key and 2 x adapters) and 1 piece R22 R12 charging hose with gauge, 3 pieces in total
- Easy to use: you only need a hex key wrench (included) to install this part
- Its compact design only requires 2 inch clearance area for installation and use.This system refrigerant charging pipe with built-in safety valve to prevent accidental venting of refrigerant
You will get:
3 Pieces charging hose with gauge kit includes 2 x BPV-31 bullet piercing tap valve and 1 x R134a charging hose with gauge
BPV-31 bullet piercing tap valve:
Good quality and easy to install.
The sealing area of the valve is 50 times that of the o-ring. In addition, its sealing force is 180 inch lbs, pressure test at 250 ℉, and torque tested with 500 lbs.
Corrosion resistant.
Replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31. Compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
Material: metal
Quantity: 2 packs
Color: sliver
R12 R22 charging hose with gauge：
R-134a can be connected to the R-12 / R-22 service port for easy conversion
Built-in safety valve to prevent accidental venting of refrigerant
90 Degree push and lock coupler with auto shut off.
Easy and convenient to use. Gauge has three scale readings of R134, R12 and R22 for your convenience
Fits only those cans with the threat of 1/2 inch. If you wan to to use it to R134a can male thread (7/16 inch), you need one adjusted connector.
Can be applied for home air-conditioning and car air-conditioning to add refrigeration.
Material: copper and rubber
Quantity: 1 piece
Package includes:
2 x BPV-31 bullet piercing tap valve kit
1 x R12 R22 charging hose with gauge
Warm notice:
It is not compatible with refrigerant R134A. Put on your safety glasses and protective gloves before piercing the pipe.
This is not the original product, the mention of brand names and any related model designation above is only for purposes of demonstrating compatibility.
Utoolmart Phosphor Copper Flat Brazing Rod Welding Wire Brass Yellow 1.3mm Thickness 3mm Width 400mm Length For Air Conditioning Refrigerator Gas Welding 3pcs
Uses: General for the mechanical and electrical instrumentation industry, brazing from impact load of copper and brass parts.
Power cord is soft, can be bent, more durable
Simple operation, novel design
Good solder ability both in electrical conductivity and thermal conductivity.
Good solderability, insulation resistance and non-corrosive.
1 Roll 304 Stainless Steel Welding Wire 1Kg 0.8Mm 0.035" Gas Flux-Cored MIG Weldier Wires
Melting Point:Other
Diameter:0.8Mm
Material:Stainless Steel
Application:Welding
Weight:1Kg
Flux Content:Other
Welding Wire, Flux Core, No Gas/Gasless Welding Wire, Wire Size: 0.8Mm St ard: E71T-GS The Price For 1 Pc Flux Welding Wire
Weight:1Kg
Material:Stainless Steel
Diameter:0.8Mm
Transporter-Galaxy – 2.00mmx3m low temperature flux cored copper aluminum gas welding rod brazing welding wires for transformer refrigerator etc
- 100% Brand new and High quality.
- Tools Accessories, Replacement and General repair equipment included: Switching Power Supply, Inverters & Converters, Cable Ties, Pneumatic fittings, Valves and Fittings, Tool Parts, Glue Guns, Spray Guns, Abrasives tools, Welding Nozzles, Welding Rods, Welding Wires, Welding Torches.
- Excellent quality, fast delivery, simple after-sales. We make every effort to provide customers with satisfactory service.
- 90% conventional orders will be delivered within 15-25 days.
- Please note that the products are only offered by Transporter-Galaxy brand. Other sales people is not reliable.
Cu Al Zn Ag low temperature flux cored copper aluminum gas welding wires 2.00mm*3m for transformer refrigerator etc brazing rods
Products name: Copper-aluminum welding rods
Diameter: 2.0mm
Length: 3m
Material: Cu+Al+Zn+Ag, brazing flux
Melting point: 320 degree
Suitable for base metal:
Electricity and fittings industry Aluminum and copper joint welding, aluminum foil and copper welding
Suitable for industry:
1, transformers and reactors' aluminum and copper joints' copper and aluminum foil's welding
2, refrigerator and air conditioning's condenser / evaporator's aluminum pipe and brass's welding;
3, radiators, motors, batteries, household appliances and other products' copper and aluminum wire's welding.
Copper and aluminum electrode features:
Do not need flux powder;
In the case of the base metal temperature of 320 degrees, with the end of the flame slightly touch the wire, in the role of flux cored, the molten welding wire will be general flow like water, very good at liquidity;
Tensile shear strength is extremely high, good corrosion resistance, overall performance is very nice.
2.00Mm3M Low Temperature Flux Cored Copper Aluminum Gas Welding Rod Brazing Welding Wires For Transformer Refrigerator Etc
Diameter:2.0Mm
Weight:0.05Kg
Flux Content:20%
Application:Copper Aluminum Welding
Melting Point:320 Degrees
Sheicon Copper Phosphorus Welding Rods For Air Conditioning Refrigerator Gas Welding (1)
- Model: Phosphor Bronze Electrode BCu93P (HL201 / BCuP-2)
- Size: Thick 1.3mmx wide 3.2mm length 400mm
- Uses: General for the mechanical and electrical instrumentation industry, brazing from impact load of copper and brass parts.
- Phosphor Bronze Electrode BCu93P (HL201 / BCuP-2): Composition P: 6.80-7.50%, Copper: Balance. Melting temperature of 710-793 ℃, the solder flow is good, can flow into the gap is very small joints
- Suitable for refrigerator air-condition welding
1 lb about 37 rods.
2 lb about 75 rods
3 lb about 113 rods
4 lb about 150 rods
4.5 lb about 170 rods
Conclusion
By our suggestions above, we hope that you can found welding rods for air conditioning refrigerator gas for you.Please don’t forget to share your experience by comment in this post. Thank you!
