activeitup 
Nowadays, there are so many products of convert freezer to refrigerator thermostat in the market and you are wondering to choose a best one. You have searched for convert freezer to refrigerator thermostat in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings convert freezer to refrigerator thermostat which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Johnson Controls A19AAT-2C Freezer Temperature Controller (D132)
Use this handy controller to regulate the temperature in your freezer between 20 – 80F . Great for turning a chest freezer into a keg refrigerator. Strictly a mechanical thermostat for cooling only, it is simple to use and economical. It operates with a gas filled probe on a 6-foot capillary tube. When the gas contracts or expands in the probe, it triggers a mechanical device inside the control which turns the power on or off. There is no probe temperature readout on the dial, so keeping a thermometer inside the refrigerator is highly recommended to keep track of the actual temperature. On most refrigerators, the controller will allow a usable range of 37 to 80 F, while on freezers, the controller will be able to reach its full 20 to 80 F range. Features: Made of stainless steel. Adjustable with the turn of a knob. No drilling necessary. Plug unit into wall and then run the sensor into your freezer. Male and female plug in one. Specs: Temperature dimensions: 4 3/8″ H x 2 1/8″ W x 1 1/2″ D. Cord dimensions: 6′. Remote sensor bulb: 5 1/2″W. Remote sensor bulb capillary tube: 6′. Temperature range: 20 – 80F. Voltage: 120 VAC.
Inkbird Pre-Wired Dual Stage Digital Temperature Controller Outlet Thermostat 110V, 1100W Heating and Cooling Multi-purpose Controllers for Aquaria, Reptile Keeping, and Brewing Fermentation Kegerator
- Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
- Be able to connect with refrigeration and heating equipment at the same time.
- Easily calibrated.
- Can display in Centigrade or Fahrenheit.
- Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
Features:
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Buzzer Alarm: High and Low Temperature Alarm
Temperature calibration
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
It has certificate of EMC, LVD, RoHS, FCC compliance.
Package Content:
1x Temperature controller ITC308
1x Manual
Inkbird Heating Cooling Stage Thermostat Temperature Controls, NTC Sensor for Home brewing Fermenation, Carboy, Freezer, kegerator (ITC308S + Long&Short Sensor)
- The probe is replaceable (NTC TYPE from Inkbird).
- The unit is perfect for home brewing, heating mat, chiller ect.
- It has a calibration adjustment setting in case you need it.
- It is accurate, easy to use, feature and reliable.
- Dual Display shows both measured and set temperature.
Description:
1. It has two outlets, one labeled cooling and one labeled heating. Plug your cooling device into the cooling outlet and your heating device into the heating outlet. You can also leave either unplugged if you’re only interested in heating or cooling.
2. Input Power: 100 ~240VAC, 50Hz/60Hz,, Output Power: 100 ~240VAC, 50Hz/60Hz,, Max Current: 10A, Temperature Setting Range: -50 to 99 deg C/-58 to 210 deg F., Max Wattage: 1100W(110V)/2200W(220V).
Package included:
1 pc temperature controller 308S
1 pc DC cord sensor, (12″ probe)
1 pc DC cord sensor, (1.97″ probe)
UbiBot WiFi Wireless Thermometer, Remote Temperature, Humidity, Light Monitor, Environment Sensor, Mobile App Alerts, Compatible with IFTTT (2.4GHz WiFi Only)
- Connect using 2.4GHz WiFi (5GHz WiFi not supported) without the need for a separate hub. Data automatically syncs to the IoT Cloud Platform. Now works with IFTTT, allowing you to build automated link with other smart devices.
- Monitoring your room or greenhouse environment anywhere. Works in a wide range of environments (-20ºC to +60ºC). View measurements and visualisations remotely via our App, web console, API interfaces through IoT platform. Support multiple devices and sharing your data with others.
- Low-power WiFi technology enables 4- 6 months battery life. Power-supply using Micro-USB is supported. You can check the battery voltage of the device remotely and set up rules to be notified when low-battery, network failure or sensor reading exceeds the setting range. Available rule alerts include Email, APP, SMS, Phone Call, HTTP API. Charges of credits in your account may apply when you choose SMS text and voice call alert modes.
- No subscription is needed. Free 200MB Cloud Storage enough to store data over 2 years on default settings. Export the data to CSV or PDF without extra charge.
- Switch the temp unit °F/°C and user calibration is available. The large internal memory which can store 300,000 records can protect your data against network failure.
Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor 2 Relays ITC-1000
Inkbird WiFi Temperature Controller ITC308 Reptile Freezer Thermostat Digital Heating and Cooling Heater Cooler Greenhouse Plug Outlet 2 Stage 1100W 110V
- [WIFI & APP] WIFI smart controller supports both IOS & Android，WIFI supports 2.4GHz Wi-Fi router, free APP “InkbirdSmart” which is able to monitor temperature at any time.
- [Dual Relay Output] Dual relay output, which can connect heating and cooling device at the same time.
- [Alarm for Safe] High/Low temperature limit setting alarm.
- [Convenient Design] Plug-n-play, easy to use. Support ℃/℉reading and Temperature calibration.
- [Maximum Output Load] 1100W(110V).
Similar items with 4 stars and above
Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding
- Plug and play design, easy to use
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Support reading with Centigrade or Fahrenheit unit
- Maximum output load: 1100W(110V)
- Dual display window, be able to display measured temperature and set temperature at the same time
Refrigerator Thermostat Freezer Refrigeration Temperature Controller Universal WPF-20
- WIDELY APPLICATION – Control the temperature of refrigerator, freezer, display cabinet, congealer, beverage cooler and similar product
- TEMPERATURE CONTROL – The scope of and differential temperature control can be a significant change
- IDEAL REPLACEMENT – The model WPF-20 has 65cm long probe wire with 2 pins, ideal replacement for your damaged thermostat
- UNIVERSIAL USE – As long as the shape and size match, suitable for a variety of different brands of products.
- 2 YEARS WARRANTY – Professional support
Model : WPF-20
Power : 110V-250V 6A
Probe Length(Approx.) : 65cm/ 25.6″
Warm In : +12.5 Celsius Degree;Cold In : 3~5 Celsius Degree;Cold Out : -2 Celsius Degree
Terminals : 3 Pins
Size(Approx.) : 61 x 61 x 22mm/ 2.4″ x 2.4″ x 0.8″ (L*W*H)
Net Weight : 75g
Package : 1 x Refrigerator Thermostat
Similar items with 4 stars and above
![[NEW] 2198202 Cold Control Thermostat W10822278 Defrost Timer W10225581 Bimetal Thermostat Refrigerator Defrost COMPELTE Kit Replacement by Blue Stars - Exact Fit For Whirlpool Kenmore Refrigerators](https://images-na.ssl-images-amazon.com/images/I/516jKd7-wLL._SL500_AC_SS350_.jpg)
AquaMonica 1PCS 3 Feet Universal fridge freezer Refrigerator Thermostat WDF18K Temperature Control 250V/5(4)A 125V/8(6)A
- Product Name : Refrigerator Thermostat
- Model No. : WDF18K
- Power : AC 250V/5(4)A 125V/8(6)A 50/60Hz
- Body Size(Approx.) : 5.5 x 3.5 x 2.3cm/ 2.2″ x 1.4″ x 0.9″(L*W*. T)
- Shaft Diameter : 6*4mm/ 0.24″*0.16″
- Cord Length(Approx.) : 90cm/ 35″
- Mounted Hole Dia : 3mm/0.12″
- Mounted Hole Center Distance : 5.6cm/2.2″
- Material : Metal, Plastic
- Color : Silver Tone, Gold Tone
- Net Weight : 95g
- Package : 1 x Refrigerator Thermostat
Description: Applicable: Control the temperature of refrigerator, display cabinet, congealer, beverage cooler and similar product. Wiring Instruction: H (6) Connect to the Brown Wire (live wire of power); L (3) Connect to the Gray Wire (live wire of light); C (4) Connect to the White Wire (live wire of compressor).
Conclusion
By our suggestions above, we hope that you can found convert freezer to refrigerator thermostat for you.Please don’t forget to share your experience by comment in this post. Thank you!
