activeitup 
Nowadays, there are so many products of dr dabber heating rod in the market and you are wondering to choose a best one. You have searched for dr dabber heating rod in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings dr dabber heating rod which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Hakko 599B-02 Wire-type soldering iron tip cleaner
The Hakko 599B-02 is a replacement solder tip cleaning wire sponge. These sponges are hard enough to remove debris and some corrosion from the solder tips while being soft enough not to damage the tip. They help to remove oxides and excess solder to preserve tip life and enable clean, precise soldering.
About Fluid Aluminum/Zinc Flexible Anode Rod Kit For Water Heaters | Includes Full Roll Of Teflon Tape | Easy-To-Follow Step-By-Step Instructions | (WITHOUT Cap) (WITHOUT Socket)
- GET RID OF THE EMBARRASSING ROTTEN EGG SMELL IN YOUR HOME with our Aluminum / Zinc Anode Rod! Did you know that the magnesium anode rod inside your hot water tank is the number one key contributor to the production of your smelly, hydrogen sulfide gas? About Fluid solved this problem by creating a flexible anode rod made from an Aluminum/ Zinc Alloy, instead of magnesium. This unique alloy works everyday, killing the bacteria responsible for the sulfur and rotten egg smelling gas.
- FITS: Almost all water heaters including: Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape will leave you with plenty left over for the next time you check your anode rod’s condition.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw or similar tool.
- CHANGE THE ANODE ROD, NOT THE WATER HEATER.The anode rod in your water heater is designed to decay instead of your Water’s Heater Tank itself. Eventually, the anode rod is completely consumed (usually just before your water heater warranty is up) and the Water Heater Tank begins to decay and ultimately rusts,fails,cracks and leaks. This is why maintaining the anode rod (by checking and or replacing every 2 years) in your water heater insures the anode rod decays, and not your water heater!
YOU’VE GOT THIS!
WE’LL WALK YOU THROUGH EACH EASY STEP.
1. WIN THE WAR ON SMELLY WATER!
Never have to explain that smell again!
2. ELIMINATE HYDROGEN SULFIDE GAS. Just replace your existing magnesium anode rod with the About Fluid Aluminum/Zinc rod and eliminate that rotten-egg-smelling, hydrogen sulfide gas, in your hot water.
3. EASY-TO-FOLLOW, STEP-BY-STEP INSTRUCTIONS.Do It Yourself Instructions, written by plumbers and translated for everyday problem solvers like you!
4. NO LEAKS! We include a full-roll of Teflon Tape to ensure you will not have leaks and will have, plenty left-over for next time.
5. ONE SIZE FITS MOST. Most water heaters including: Rheem, Reliance, Richmond, Kenmore, State and GE, AO Smith and many more that use this “HEX TYPE” (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode.
6. SAVE YOUR TANK AND SAVE $. This sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
7. INSTALL IN SMALL SPACES. The About Fluid flexible hinged design allows you to install the anode rod in any location with about a foot of overhead clearance.
8. RUGGED CONSTRUCTION. Anode Rod Segments are connected with 100 percent, 316 Stainless Steel Aircraft Cable and connectors that will never rust, corrode or break.
Similar items with 4 stars and above
Tabiger Soldering Iron Kit 60W 110V-Adjustable Temperature Welding Soldering Iron with Tool Carry Case
- 【Weekend Discount】 – To appreciate ournew and old customer’s support and love for this product, there will be a two-month weekend discount,from March to April, each order can enjoy a 12% off discount on weekends.
- 【HEAT UP QUICKLY and HEAT DISSPATION EFFICIENCY】 -60 watts, heat up quickly(2 minutes or so). Adjustable temperature with thermostat range 200~450℃. With our upgrade steel-pipe design, the soldering iron is more efficient in a better heat dissipation.
- 【11-In-1 Soldering Kit】- Soldering iron kit comes with soldering iron,desoldering pump, 5 multiple soldering tips, soldering iron stand, tweezers, solder and sponge.
- 【PORTABLE STORAGE TOOLBOX】- Plastic carry case is rather convenient to store small tools and easy to carry. which can avoid losing the soldering gun and accessories. It is rather convenient to carry anywhere for electric repair, home DIY and other soldering projects.
- 【RANGE of APPLICATION】The soldering sets are the best gift idea for DIYER, various repaired usage of electronics and chip boards, welding, jewelry, guitar, watches, wiring, mobile device, computers hardware, small electronic work, TV capacitors or accessories, you can also use it together with our heat shrink tubing and get 15% off for the heat shrink tubing, if you purchase them together.
Blue Lightning 79098 Residental Magnesium Flexible Anode Rod, Hex Plug, 44-Inch
Jackson Safety Contour Wrap-A-Round Pipe Marking Tool (14752), Black, Medium, 3.88” to 4’, 1 / Case
- 1 Jackson Safety Medium Wrap A Round / Case
- Black
- Made out of flexible gasket material, with good resistance to heat and cold
- Printed with a scale in inches, inch chart, tangent chart and other useful markings
- Economical tool for marking straight lines around pipe or for use of a straight edge
Jackson Safety Brand Medium Wrap A Round Tools (Black) are an easy to use tool for pipe fitters and welders. Measuring 3.88” to 4’, they are printed with a scale in inches, an inch chart, tangent chart and other helpful markings to help you make a straight line around pipes. Made out of a flexible gasket material, they have good resistance to heat and cold. When you need an economical tool for marking pipes, trust the Jackson Safety Medium Wrap A Round.
Soldering Tip Cleaner Solder Tip Cleaning Wire and Holder Soft Coiled Brass Tip Cleaner Kit with 5 PCS Solder Tip Cleaning Wire and 1 PC Holder for Cleaning Soldering Irons and Tips, No Water Needed
- [Excellent Product Performance] XOOL Soldering tip cleaner cleans better than conventional sponges. It doesn’t need water so that will not reduce the tip’s temperature. There is no contamination risk compared to conventional tip tinners. It avoids premature wastage of soldering iron tips. And it greatly reduces the rate of oxide accumulation in soldering iron tips compared to conventional tip cleaners.
- [High Quality] Soldering tip cleaner wire uses high quality brass material. When you plug the soldering iron on tip cleaner, the tip will be cleaned thoroughly. Your tip will be cleaned cleaner and faster. Soft coiled brass tip cleaner can reduce oxide accumulation effectively and prolong soldering iron tip service life.
- [Humanized Design]The holder has a ball shell design. When you clean your soldering iron tip, there won’t have tin residual out the container, which will keep your workbench cleaning.
- [Save Time]Water on a sponge drops the tip temperature quickly and depending on how fast your equipment can recover you may save down time with the XOOL soldering iron tip cleaner. Use XOOL Solder Tip cleaning wire will improve your work efficiency.
- [Easy to Use] The holder has two parts. You can separate the two parts to clean tin residual easily. Our soldering iron tip cleaner kit have 5Pack tip cleaner that can meet the maximum of use’s requirement.
WRAP-ON Pipe Heating Cable – 3-Feet, 120 Volt, Built-in Thermostat, Low Wattage – 31003
- BUILT-IN THERMOSTAT – Turns the cable on at 38 degrees F and prevents frozen pipes to -50 degrees F – Simply wrap on, insulate and plug in. Insulation sold separately.
- PRESS-TO-TEST BUTTON – Exclusive feature to test cable before or after installation.
- ENERGY EFFICIENT – Uses up to 65% less energy at 2 watts per foot vs other cables at 7 watts per foot.
- USE ON ALL RIGID PIPES – PVC, CPVC, copper and metal pipes.
- MADE IN THE USA
Product Description
Prevents frozen water pipes to –50F. Simply wrap on, insulate and plug in. Engineered for use on metal and rigid plastic pipes. Uses an exclusive Press-To-Test button so you can test the cable before installing. A built-in thermostat turns the cable on at 38F. Proven low-wattage design uses up to 65 percent less energy at 2 watts a foot vs. other cables at 7 watts a foot, and protects to –50F. An exclusive power sensor light glows when the thermostat is closed. Each package contains one ready-to-install pipe heating cable along with installation instructions. To install, you will also need PVC/electrical tape, fiberglass pipe insulation, a tape measure and eye protection. Warning: This cable has been designed for the sole purpose of preventing metal and rigid plastic water filled lines from freezing. DO NOT use this product on fuel lines, drain lines, hoses or buried pipes. Fiberglass pipe wrap is required to complete the installation. Read and follow all instructions. Cables are available in various lengths. See chart to determine the length required for your application.
From the Manufacturer
Pipe Heating Cable – 31003 3Ft. Ul Pipe Heating Cable
Similar items with 4 stars and above
Bully Tools 99203 Soil Probe Steel Tstyle Handle, 48_inch
Product Description
Bully Tools Soil Probes feature an all steel construction for superior durability.
From the Manufacturer
Tools made to last a lifetime, and be passed on from generation to generation. 100% Made in the USA Bully Tools is bringing back that tradition with tools built to endure years of hard labor. We have re-engineered the classic designs of shovels, rakes and other popular tools to create more efficient, durable products. Special features on specific products include true 14 gauge steel, triple wall reinforced fiberglass handles, extended length ferrules, and welded I-beam supports. We stand behind our products and offer a limited lifetime warranty. If one of our tools fails during normal use, we will replace or refund it! In a time when cheap foreign products are the norm, Bully Tools offers affordable, high quality Made in the USA goods.
Similar items with 4 stars and above
Thermaltronics FBA_TMT-TC-2 Lead Free Tip Tinner, 20 g in 0.8 oz. Container
Thermaltronics TMT-TC-2 Tip Tinners is a compressed tablet of pure tin and ammonia phosphate formulation in a metal container with lid. It has a self adhesive pad on the underside to allow it to be affixed on, or near the work station. Thermaltronics TMT-TC-2 Tip Tinners provides fast, efficient cleaning and re-tinning of blackened and highly oxidized soldering iron tips, safely and efficiently.
Hakko FX601-02 Adjustable Temperature Controlled Soldering Iron, 67 Watts
The Hakko FX601-02 is the next generation of variable temperature-controlled soldering irons. It is ideal for soldering applications that require mobility or a long reach, such as soldering solar panels, etc. The extremely lightweight, ergonomic handpiece allows you to solder for long periods of time without hand fatigue. The soldering iron also features a convenient temperature adjustment dial in the handpiece that allows the user to select their optimal soldering temperature, and the advanced electronic controls and efficient ceramic heater provide accuracy and stability that rival older Hakko stick irons.
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found dr dabber heating rod for you.Please don’t forget to share your experience by comment in this post. Thank you!
