![Which Is The Best Cooling Antminer S9 Bitcoin](https://images-na.ssl-images-amazon.com/images/I/61JscOdwJsL._SL1285_.jpg)
Which Is The Best Cooling Antminer S9 Bitcoin
Nowadays, there are so many products of cooling antminer s9 bitcoin in the market and you are wondering to choose a best one. You have searched for cooling antminer s9 bitcoin in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings cooling antminer s9 bitcoin which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Tinker3D Antminer S7 S9 S9i E3 T9 L3+ D3 A3 V9 X3 120mm Fan Duct Cooling Shroud to 5 Inch Vent Hose
- Antminer Fan Duct Shroud to connect 5 inch vent hose
- Improved airflow compared to 4 inch design
- Designed to fit standard 120mm fans using existing screws
- Made in USA and 3D printed using ABS
- Works with Antminer S15, T15, S9, S9i, E3, T9, V9, X3, L3+, D3 and A3, DragonMint, and Whatsminer
This custom designed fan duct was specifically created for Antminer bitcoin miners, but will work with any 120 mm fan. These will fit most ASIC miners, including DragonMint and Whatsminer M10. As miners, we know how important it is to cool mining equipment and keep temperatures low. Just replace the fan guard with our fan duct using your existing screws and see results immediately. The duct was designed to fit standard 5 in vent hose and to keep air moving. This 5 inch design will have more efficient and better airflow than the 4 inch design! These shrouds are 3D printed using ABS plastic, which is a durable thermoplastic and able to handle to high temperature produced by mining equipment. Does not include 5 in vent hose or clamp. Will not work with Antminer S7 single fan design. Depending on color availability, item may be black or blue.
This product is custom designed and manufactured by Tinker3D. We have worked hard to develop a quality and durable product. Please be aware of other sellers because we can not guarantee their build quality or material. Often times other sellers will use PLA, which is inferior to ABS and can pose a fire risk.
*Antminer is a registered trademark of Bitmain Technologies. We are not affiliated with Bitmain Technologies.
A13D Solutions Antminer S1 S3 S5 S7 S9 T9 L3+ 120mm Fan Duct Coupler Cooling Shroud to 4" Inch Vent Hose
- Antminer fan duct coupler/adapter shroud to connect 4 inch HVAC exhaust hose
- Perfect fit to Antminer 120mm cooling fan using OEM screws
- Reduce heat and noise, maximize mining efficiency! Outer ridge helps secure vent hose in place
- Made in USA and 3D printed using high-grade PLA, a non-toxic bioplastic
- Strong, rigid, 100% solid PLA that has a melting point of 180°C
Our proprietary 120mm fan coupler is designed specifically for Antminer bitcoin miners but will work with any standard 120mm fan. Be advised: A13D products are not available through resellers so purchase of our products from sellers other than “A13D Solutions” are counterfeit.
Maintaining temperature and proper airflow of your mining environment are vital to every mining operation! To install, just replace the Antminer fan guard with our fan coupler using the existing OEM screws and attach 4″ vent hose to immediately reduce heat and noise in the containment area.
Our 120mm fan coupler was designed in collaboration with an HVAC Technician to fit standard 4 in vent hose maximize airflow away from your miner. A13D Solutions produces these 120mm fan adapters using PLA, a non-toxic bio-plastic. Product does not include 4 in vent hose or clamp and will not work with Antminer S7 single fan design.
As with most 3D printed items, expect some surface inclusions and visual imperfections that are cosmetic ONLY and do not effect the functionality of this utility part. Any defects discovered that are associated with the 3D printing process will be replaced at no charge.
This A13D Solutions product is 3D printed via the fused deposition modeling (FDM) method. This product is printed 100% solid and not printed hollow to cut material costs like some other vendors. Please be aware of other makers selling similar products made from toxic materials like ABS that can release toxic gases after prolonged exposure to heat according to the MSDS (Material Safety Data Sheet). ABS is a great material but not the best choice for HVAC applications involving air circulation.
Also available in three (3) and six (6) packs from A13D Solutions
*Antminer is a registered trademark of Bitmain Technologies. A13D Solutions is not affiliated with Bitmain Technologies or any other related organization.
Tinker3D Antminer S7 S9 S9i E3 T9 L3+ D3 A3 V9 X3 120mm Fan Duct Cooling Shroud to 4 Inch Vent Hose
- Antminer Fan Duct Shroud to connect 4 inch vent hose
- Perfect item to keep temperatures low and increase mining efficiency
- Designed to fit standard 120mm fans using existing screws
- Made in USA and 3D printed using ABS
- Works with Antminer S9, S9i, E3, T9, V9, X3, L3+, D3 and A3
“This custom designed fan duct was specifically created for Antminer bitcoin miners, but will work with any 120 mm fan. As miners, we know how important it is to cool mining equipment and keep temperatures low. Just replace the fan guard with our fan duct using your existing screws and see results immediately. The duct was designed to fit standard 4 in vent hose and to keep air moving. These shrouds are 3D printed using ABS plastic, which is a durable thermoplastic and able to handle to high temperature produced by mining equipment. Does not include 4 in vent hose or clamp. Will not work with Antminer S7 single fan design. Depending on color availability, item may be black or blue.
This product is custom designed and manufactured by MG3D Designs. We have worked hard to develop a quality and durable product. Please be aware of other sellers because we can not guarantee their build quality or material. Often times other sellers will use PLA, which is inferior to ABS and can pose a fire risk.
*Antminer is a registered trademark of Bitmain Technologies. We are not affiliated with Bitmain Technologies.”
DragonX Antminer S9 14.0TH/s 16nm ASIC Bitcoin Miner(New/Used @ 0.098W/GH with PSU and Power Cord
- Bitcoin Mining Hash Rate: 14.0TH/s ±5%, with psu
- Power Consumption: 1372W ±10%,Extremely Efficient Bitcoin / Bitcoin Cash Miner: 0.098 J/GH ±7%
- Built-in web management portal
- Bitmain Power Supply Included with Heavy Duty C13 to NEMA 5-15P Power Cord (14AWG)
- Please be aware that AntMiner S9 14T is not accept return and refund, the manufacturer will provide warranty for 180 days, if you return within 20 days, we will charge 40% restock fee.
Warning:
Better have 220v-264v power to run!
If you only have 110v-120v power (standard power outlets in the US) ,we recommend using 2 PSUs together when using 110v-120v power sources.
Specifications:
- Hash Rate: 14.0 TH/s ±5%
- Power Consumption: 1372W ±10%
- Power Efficiency: 0.098 W/GH ±7%
- ASIC Chip: 189 x BM1387
- Dimensions: 350mm(L)*135mm(W)*158mm(H)
- Cooling: 2x 12038 fans
- Network: Ethernet cable is not included
Notes:
- 1. Due to the nature of these products, there are higher than normal restocking fees (typically 40%). The restocking fees are typically waived in the event that there is a provable failure within the first 30 days and the warranty has not been voided by overclocking. In the event that you experience a failure, please reach out to the seller immediately
- 2. Power consumption varies with PSU
- 3. Very loud
Similar items with 4 stars and above
New Bitmain Antminer S9 SE 16T 1280W ASIC Miner Save Much Less Energy Than Antminer S9J 14.5TH
- New Antminer S9 SE 16T 1280w Mining miner save much electric cost than Antminer S9J 14.5th and S11
- Do not include Power supply, We recommend Bitmain APW3++ 1600W PSU or APW7 1800W PSU
- We accept return within 30 days, but we will charge 40% restock fee, so please make a serious consideration before purchase
- Antminer S9 SE 16TH is bitmain new machine, only 1280w, very competitive Bitcoin miner, use less energy,
- No Software Required – Built-in Web Interface Allows For Easy Configuration
Special provision
Breaking down cryptocurrencies involves financial risks. These risks may relate to changes in the exchange rate of the cryptocurrency or to changes in the algorithm used to mine the cryptocurrency. Please consider carefully before you make a purchase, as we do not accept refund requests for orders of this batch.
Description
1.Mining Hash Rate: 16±5%
.
2. Power Consumption: 1280W ± 10 %.
.
3. Power Efficiency: 93.88±10%.
. .
5. Dimensions: 321mm ( L) * 129mm (W) * 200mm (H).
6. Cooling: 2x 12038 fans.
.
7. Network: Ethernet cable is not included
Fan Simulator for BITMAIN Antminer S9 S11 S15 S17 D3 L3+A3 T9 Z9 E3 | Direct Plug & Play Emulators | Oil Submersion 3M Novec | Fully Assembled Fake Fan Sensor, Eliminator, Fan Delete, Spoofer (2 Pack)
- ✔MOST EFFICIENT BITMAIN FAN SIMULATOR IN 2019✔ This is the most efficient little device you can use to emulate the cooler fan presence and make the ASIC think that the fan is running perfectly. You can completely remove the fans if you are cooling your device with oil submersion as they won’t be required in the cooling system. It’s a neat device with an expert product finesse & we are sure you are going to enjoy adding this to your Bitcoin mining hardware kit.
- ✔EASY PLUG & PLAY INSTALLATION✔ It is a simple plug-and-play device with no programming required & does not need any configuration as well. It allows the miner to run without any errors by sending a fan sense, a tachometer signal, to the miner’s controller tricking & making the it believe that it has fans attached and working within parameters. Each Antminer cooling fan requires 1 emulator & PCB plugs directly into the primary fan port. It’s as simple as that!
- ✔OIL IMMERSION & CALIBERATION✔ Bitcoin/Crypto miners like the Antminer S15, S11, S9, S7, S5 & they know very well that having an effective cooling system is essential for their success. Immersed either in a dielectric oil or 3M Novec ensures a cooler environment & stable system performance. Fan can run at full speed & also the RPM can be adjusted (variable) at any time. The device typically reports fan speeds around 6000-8000 RPM which is good enough for an Antminer S9/D3/L3+ etc.
- ✔HIGH QUALITY COMPONENTS & POWER CONSUMPTION✔ Our package will include 2 emulators, they are horizontally oriented & come with insulated power cord/Antminer cable. The printed circuit board undergoes a transport stability test and a final 1 hour performance test to ensure product quality. With 12 V & 0.09 W power, it consumes extremely less amount of power to operate which is far less than a fan. This is suitable for Bitcoin Mining Machines, Mining Rigs or other devices that use 4pin connectors.
- ✔MONEY BACK PRODUCT WARRANTY✔ It is a fully compliant & backed up by manufacturer’s warranty so feel free to contact us for any query or information. We have a track record of ensuring happiness of clients and are absolutely confident that our product will exceed your expectations. Just in case the product falls short of your expectations in any manner, you can return it for a 100% refund. We will go an extra mile to redress the situation at hand.
Our product acts as an Antminer cooler by replacing the Bitmain Antminer’s fan and provides a tach signal to the Antminer Control Board/Antminer Power Supply. Simply unplug the fans and plug in the fan emulator. The Antminer now starts thinking that it has control over fans that do not exist. This can be used for other applications that use high RPM (6000+), pulse width modulated (4-wire) fans. Our device is designed specifically for Antminers by a team of specialist engineers with high quality, professionally masked printed circuit board to meet the updated requirements as per user demand. You can completely remove the fans if you are cooling your device with oil submersion, so need to worry about having a fan shroud or a fan duct. The device also allows you to install low noise fans if you have very cold temperatures or are underclocking your miner/bitminer.
We do not compromise on product quality & always keep it as our first priority. We have a remarkable after sales service & provide a free product replacement warranty. If you are not satisfied for any reason, within the first 30 days, return it for a full 100% refund
We are absolutely confident that this product just like others will not disappoint you and will exceed expectations. Feel free to contact in case of any issue or further information.
Hands Free Bitcoin Bit Kit – Plug and Play Bitcoin Miner – 14 TH/s ASIC Miner – All in One, Easy Bitcoin Mining Kit
- The Bit Kit connects to the internet and automatically validates transactions on the Bitcoin network. You get paid in bitcoin for keeping the network safe and secure.
- Easy to set up – Comes with everything you need to start mining bitcoin. Just plug it into your home power and internet and turn it on.
- Easy to use – Requires no special knowledge to operate. This machine will passively add bitcoin to your account every day.
- Easy to save – Watch your bitcoin wallet grow and enjoy the benefits of earning real bitcoin.
- Easy to spend – Our mobile-friendly platform allows you to send or spend your bitcoin effortlessly.
The Hands Free Bitcoin Bit Kit is a bitcoin miner that includes all of the hardware and software you need to start mining your own bitcoin. Set up simply requires that you connect the power and internet cables, position the power switch to “on”, and connect it to your online account. That’s it… really!
This product includes all of the components that allow you to seamlessly operate and install the pre-assembled Bit Kit in a matter of seconds. Power and Internet cables are included. Requires power and a stable internet connection of at least 1Mbps. At 110 V – 120 V, please allow for a minimum circuit rating of 15A per Bit Kit. If you are operating more than 1 Bit Kit, you may need to have them on separate circuits to avoid tripping the breaker.
Once you receive your Bit Kit you will register an account at handsfreebitcoin.com. You will, then, follow the directions on your Start-Up Guide to add your Bit Kit to your account via the built-in QR code reader. After the Bit Kit is added to your account our software and hardware mines the bitcoin straight into your account. You can withdraw or send bitcoin at any time. You earn 93% of the bitcoin contributed by your hashing power. Hands Free Bitcoin retains 7% for fees and operational costs. This ensures the best experience and ongoing support for our customers. Due to changes in network hashrate, network difficulty, and individual’s hashrates, the amount of bitcoin mined may fluctuate. This product has an average hash rate of 14 Terahashes per second (+/- 5%) and uses 1190 Watts. Hands Free Bitcoin is not responsible for any costs associated with mining bitcoin, such as: electricity, internet, shipping, storage, heating/cooling, sound containment, ventilation, or any other costs that the user may incur. Bitcoin miners (Bit Kits) generate heat and sound. It is recommended that the unit is placed in a cool, dry, well-ventilated area away from your living environment.
Antminer T17e 50TH/S Bitcoin T17e 50th Antminer Bitcoin Miner Mining Machine Better Than Antminer S17
- New BTC Bitcoin Miner Antminer t17e 50TH Mining ASIC miner use the 2nd generation 7nm chips
- We Will charge 40% restock fee if return within 30 days, so please make a serious consideration before purchase
- Antminer t17e 50th bitcoin mining machine need 2pcs power cords, we will send 2 power cords as a gift
- much Better than Antminer s9,Antminer s17e 64th, Antminer s17pro 53th, s15, S9 antminer, antminer t17 42th
- Include PSU, Please kindly note that the required input voltage for S17-56TH/s is 220V. Wrong input voltage may probably cause miner damaged
Special provision
Breaking down cryptocurrencies involves financial risks. These risks may relate to changes in the exchange rate of the cryptocurrency or to changes in the algorithm used to mine the cryptocurrency. Please consider carefully before you make a purchase, as we do not accept refund requests for this antminer t17e 50th.
Description
1.Bitcion Mining Antminer T17 Hash Rate: 50th
.
2. Power Consumption: 2700W ± 10 %.
.
3. Power Efficiency: 93.88±10%.
. .
5. Dimensions: 298mm ( L) * 178mm (W) * 296mm (H).
6. Cooling: 2x 12038 fans.
.
7. Network: Ethernet cable is not included
Innosilicon T2T 30Th/s BTC ASIC Miner Machine 2200W Bitcoin Miner Include PSU
- Innosilicon T2T 30T bitcoin miner is 30Th/s (± 5%), energy consumption is only 2200w (+/- 10%).
- There are 4 working models,when you set 1620w, Harsh rate is 24TH, Set 1900w, it is 26TH, Set 2100w, It is 29TH, Set 2200w, It is 30TH.
- please be aware that Innosilicon T2T 30TH is not accept return, if you return within 20 days, we will charge 40% restock fee.
- T2T-30T PSU is more than 2000W, so please purchase AC cable with 3*2.0 specifications, and 3 wire cores with diameter no less than 2.0mm
- Please review T2T-30T bitcoin miner before you buy, because we do not accpet return for this miner. And this miner is not for amateurs.
Special provision
Breaking down cryptocurrencies involves financial risks. These risks may relate to changes in the exchange rate of the cryptocurrency or to changes in the algorithm used to mine the cryptocurrency. Please consider carefully before you make a purchase, as we do not accept refund requests for orders of this batch.
Description
1.Mining Hash Rate: 32THs
.
2. Power Consumption: 2200W.
.
3. Power Efficiency: 0.093 W / GH ± 7%.
.
4. ASIC Chip: T2 Chip.
.
5. Dimensions: 460mm ( L) * 160mm (W) * 236mm (H).
6. Cooling: 2x 12038 fans.
.
7. Network: Ethernet cable is not included br>
Conclusion
By our suggestions above, we hope that you can found cooling antminer s9 bitcoin for you.Please don’t forget to share your experience by comment in this post. Thank you!