Best 26X18 Duel Radiator Cooling Fan
Nowadays, there are so many products of 26×18 duel radiator cooling fan in the market and you are wondering to choose a best one. You have searched for 26×18 duel radiator cooling fan in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 26×18 duel radiator cooling fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Derale Performance 16927 Gray/Black High Output Dual Radiator Fan
This high performance primary cooling fan kit combines two high output motors and a sturdy laser-cut powder coated metal shroud with pressure relief vents to produce one serious dual electric fan setup. Shroud measures 26 inch wide by 18 inch top to bottom and is only 4 inch in overall depth to offer an adjustable yet precision fit. Designed for puller applications, It’s perfect for muscle cars, street rods and heavy duty trucks, this combination produces 4,000 CFM while each fan draws 24.8 amperes. Includes mounting brackets, hardware and two high amp relay harnesses.
Flex-a-lite 420 Lo-Profile S-Blade Dual Electric Puller Fan
- Overall dimensions of 26 1/4″ x 15 1/2″ x 2 5/8″
- Flows 2,500 cfm (cubic feet per minute) at 22 amps of current draw
- S-blade design offers quieter operation than traditional straight blades
- One year manufacturer warranty
- Facilitates hassle-free installation and features universal application
The Flex-a-lite Lo-Profile S-Blade Dual Electric Puller Fan is designed to offer optimum cooling for situations where clearance is an issue. At just 2 5/8” thick, it is one of the lowest profile fans of its kind on the market.
DNA Motoring RA-JEEP87-3 Aluminum Racing Radiator
Aluminum racing radiator is designed to provide maximum cooling efficiency to prevent premature engine failure. Its light-weight, and high-heat transferring aluminum features a tube and fin design that, dramatically increases surface area that enables the heat to dissipate more efficiently. This racing radiator is at least 40% more efficient than stock ones. Most importantly, it has a much higher capacity for coolant than stock ones, which means that your cooling system will be more efficient and will be more resistant to temperature surges in racing applications.
Phanteks PH-ES314ETG_AG EVOLV mATX Tempered Glass Edition Aluminum Exterior RGB LED Illumination Micro Tower Case Gray
- Aluminum body (3mm). Clean interior – Hidden PSU/HDD/Cables. RGB LED illumination. Dual Tempered Glass Panels
- Magnetic Tempered Glass Panels on hinges. Quick release panels for easy access. Removable dust filters. Long GPU support (up to 319mm/12.5in)
- Phanteks Premium fans 140mm. 26mm cable management space + additional cable compartment in bottom. Support Synchronization with RGB Motherboards and Phanteks RGB products
- Water-cooling ready – Radiator support up to 280mm(top) and 360mm(front), Pump bracket. AIO water-cooling products up to 360mm
The EVOLV MATX is the successor of the very first Evolv case and combines 3mm anodized aluminum with dual tempered glass side panels. System builders and water-cooling enthusiasts can now present their build with a premium touch. The EVOLV MATX is equipped with innovative features, amazing (water)cooling potential, and RGB illumination.
Similar items with 4 stars and above
Dual Electric Cooling Fan Wire Harness Kit 185 On 165 Off Thermostat 50 AMP Relay NEW
- Condition:brand new and well packaged
- COMES ON AT 185 degrees AND TURNS OFF AT 165 degrees .
- Works for: 2 x 8 inch Fans 2 x 10 Inch Fans 2 x 12 Inch Fans 2 x 14 Inch Fans Single 8 Inch Fan Single 10 Inch Fan Single 12 Inch Fan Single 14 Inch Fan Single 16 Inch Fan (Two 16 inch fans, need 2 Relay Kits)
- Included in this Relay kit: 185 Degree Thermostat Switch 1 Relay Wire Harness 1 3/8″ NPT Thread-In Probe 2 Ring Terminals 2 Fan Pigtail Connectors Included 1 Fuse Holder 3/8″ to 1/2″ Adapter 30 & 40 amp Fuses,English instruction
- Direct Replacement
Welcome to QKPARTS.
We provide 100% perfect customer service, please contact us if you have ANY question!
This kit is set up to turn your electric fan on at 185 degrees and shut off at 165 degrees and will work with any 12 volt system. COMES ON AT 185 degrees ANDTURNS OFF AT 165 degrees. It is a 3/8″ pipe thread, this kit includes everything you’ll need to hook up to your fan.
2 x 8 inch Fans
2 x 10 Inch Fans
2 x 12 Inch Fans
2 x 14 Inch Fans
Single 8 Inch Fan
Single 10 Inch Fan
Single 12 Inch Fan
Single 14 Inch Fan
Single 16 Inch Fan
(Two 16 inch fans, need 2 Relay Kits)
Included in this Relay kit:
185 Degree Thermostat Switch
1 Relay Wire Harness
1 3/8″ NPT Thread-In Probe
2 Ring Terminals
2 Fan Pigtail Connectors Included
1 Fuse Holder
3/8″ to 1/2″ Adapter
30 & 40 amp Fuses
Free Shipping :Our inventory is stocked & ready to be shipped from KY, USA.
Highly appreciated your order and hoping you have a best buying experience in our store.
LICHIFIT DJC-0641 LS3 V8 6.2L Engine Realistic Motor with Radiator Cooling Fan Temperature Sensor Common Use for 1/10 Scale Trx4 Jeep Land Rover d90/110/130
- Common use, can be applied on trx4, scx10, scx10II motor, the OD of motor can be 36mm-38mm.
- Temperature sensor with fan set inside, the fan will be activated when 35℃ above, and will stop when 25℃ below. High speed fan, with 25CFM ±10% wind flow.
- Cylinder cap, ignition coil secondary cable, engine cover, exhaust manifold, air intake, common rail are heat-resistant ABS material(100℃ limited), can be painted as you like, cylinder block &oil level gauge are stainless steel material, heat sink is alu. material.
- Design based on LS3 V8 6.2Lengine , simulated cylinder cap, ignition coil secondary cable, engine cover, exhaust manifold, air intake, common rail, cylinder block, oil level gauge details.
- Length*width*height: 63mm*71mm*52mm, Weight: 60G
Attention when this product is equipped on trx4 original motor position:
One side of exhaust manifold should be removed, that will let V8 engine to enough space to be installed.
You must cut part of the body posts and mounts to have enough space to the V8 engine.
DJC-0640 trx4 dashboard & DJC-0617interior can not be used when fix V8 engine on original position, to have perfect effect, MUST apply the front-engine set (NOT INCLUDED), then DJC-0640&DJC-0617&V8 engine can work together perfectly.
Attention when apply front-engine set for trx4 use:
Exhaust manifold should be removed, that will let V8 engine to enough space to be installed. You can use DJC-0226 metal holder to have more space to let Exhaust manifold be equipped.
1 set Simulation Engine Cover + Radiator Motor Fan
Corsair LL Series LL120 RGB 120mm Dual Light Loop RGB LED PWM Fan Single Pack
- 16 independent RGB LEDs in every fan, split between two separate light loops
- This Product is intended as an expansion of the Ll120 RGB LED 3 fan kit with lighting Node Pro. The RGB functionality of this Product requires a RGB lighting hub and lighting Node Pro
- PWM fan control allows for dynamic speed adjustment between 600 rpm to 1, 500 rpm, minimizing noise or maximizing airflow
- 120mm fan Blade engineered for Low-Noise operation without sacrificing performance
- Air Flow Rate: 43.25 CFM
- Operating Voltage: 7V – 13.2V
- Speed: 600 – 1500 RPM
The Corsair ll120 RGB PWM fan combines excellent airflow, low-noise operation and 16 brilliant independent RGB LEDs, spread between two separate light loops that encircle the fan and its hub. Pair with an existing ll120 RGB kit or Corsair lighting Node Pro (sold separately) to customize lighting with a wide array of vivid effects and patterns. Using an optimized 120mm fan blade and PWM control, set the speed of the fan anywhere from 600 RPM to 1, 500 RPM for precise noise and airflow adjustment. Made for those seeking excellent airflow, quiet operation, and powerful lighting, the Corsair ll120 RGB fan puts your PC back in the loop.
Aluminum Fan Shroud Kit for 28 Inch Radiator, Engine Driven Fan
- Choice of off center, side-to-side and above the radiator fan positioning
- Includes fully-formed shroud of .063″ lightweight aircraft aluminum
- 3″ wide adjustable collar for 15-20″ fan diameters
- Includes all the necessary hardware and mounting instructions
- Fits 28″ crossflow radiators with 22″ wide x 19″ tall cores
These universal fit aluminum fan shroud kits can be built to fit many applications with a belt-driven fan. The adjustable collar will accommodate 15″-20″ fan diameters.Measures 21-3/4″ x 19-1/2″ tall x 2-5/8″ thick. Works well with Speedway 28″ wide radiators Made for exact fit of many Muscle Car and Hotrod radiatorsAllows the installer the choice of off center, side-to-side and above the radiator fan positioningFor crossflow or downflow radiator mountingIncludes fully-formed shroud of .063″ lightweight aircraft aluminum3″ trimmable collarAdjustable collar; adjusts for 15-20″ fan diametersIncludes all the necessary hardware and mounting instructionsShroud made of 14 gauge aluminumMeasures 21-3/4″ wide x 19-1/2″ tall x 2-5/8″ thick (approximate)Fan Ring, 3” x 65”Flat tab, 3” x 7”Brackets, 90º (6)Screws (6)Fan Shroud Installation Instructions (PDF)Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.Item DetailsStyle C, D & H Mechanical Fan Shroud Only
Mishimoto MMFS-DBP-26 Mishimotorsports Dual-Pass Race Radiator Fan Shroud Kit, Silver
- Fits Mishimoto’s dual pass race radiator
- Height: 18″ Length: 22″ Width: 3.5″ (including fan)
- Fan CFM: 1150
- Includes aluminum fan shroud and one 16″ slim electric fan
- Mishimoto Lifetime Warranty
- Includes: Aluminum shroud (1), 16″ Slim electric fan
- Overall Size: 26″ x 17″ x 3.5″
Mishimoto Fan Shroud Kit will considerably improve engine cooling functions and the overall performance of your vehicle. All mishimoto fan shrouds are significantly lighter than standard fan shrouds, and are a direct OEM fit. They will notably improve engine cooling performance by delivering more air to the radiator and driving out excess heat. Mishimoto fans shroud kits will safely secure the fan blades from potentially damaging other vital engine components.
Barrow 120mm PWM RGB Fan for Radiators, Fixed Rainbox Lighting, Black, 4-Pack
Barrow’s fans have been developed to deliver significant airflow and look good with the installed RGB lighting system. Barrow RGB controller not included.
By our suggestions above, we hope that you can found 26×18 duel radiator cooling fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
Best 26x18 duel radiator cooling fan: Top-Rated Brands & What to Buy